期刊名称：JOURNAL OF FORENSIC AND LEGAL MEDICINE
 期刊简介(About the journal)
投稿须知(Instructions to Authors)
编辑部信息(Editorial Board)
About the journal
Official journal of the Faculty of Legal and Forensic Medicine and the Australian College of Legal Medicine.
The Journal of Forensic and Legal Medicine provides a forum for the rapid publication of topical articles on legal medicine and all clinical aspects of forensic medicine and related specialities. The Journal carries definitive reviews, original communications, hypotheses, learning points of important issues, offering critical analysis and scientific appraisal. All submissions are peer-reviewed by at least two independent reviewers, and the Journal is listed in MEDLINE/Index Medicus.
All aspects of legal medicine, the coronial system and the medical principles of care and forensic assessment of living individuals, whether adult or child, in contact with the judicial system are examined and the Journal has a broad international perspective.
Topics covered in the journal include, but are not necessarily limited to, the following, particularly with relevance to the clinical setting:
forensic medicine
forensic pathology
forensic science
forensic toxicology
forensic odontology
forensic anthropology
forensic psychiatry
forensic genetics
death and care in custody
training, forensic nursing
occupational health of police, fitness to interview
death investigation and causes of death
forensic medicine national systems
human identification
entomology and palynology
taphonomy
mental health
criminology, profiling
child abuse and neglect
interpersonal violence, assault and injury, personal injury, elder abuse, domestic violence
sexual assault
suicide, parasuicide and deliberate self-harm
restraint injuries
drug and alcohol misuse
drink and drug driving
traffic medicine, transportation medicine, refugee and asylum medicine
medical law, medical ethics
euthanasia and end of life issues
consent
confidentiality
clinical negligence
professional regulation
patients'complaints procedures
medical disciplinary procedures
the coronial system
clinical governance
clinical risk management
clinical performance review procedures
criminal charges arising from clinical practice such as murder, manslaughter and indecent assault
the sick doctor
the validation, licensing and certification of doctors
mass disaster, war graves
torture
extra-judicial deaths
human rights
Abstracting and Indexing
Bibliography of Periodical Literature and International Bibliography of Book Reviews
Cambridge Scientific Abstracts
Criminal Justice Abstracts
EMBASE
Forensic Science FORS
MEDLINE®
National Criminal Justice Reference Service
Scopus
Instructions to Authors
Article structure
Where appropriate the manuscript should follow the scheme described below: (1) title page, (2) summary and keywords, (3) text, (4) references, (5) tables, (6) captions to illustrations, (7) illustrations.
Subdivision - unnumbered sections
Divide your article into clearly defined sections. Each subsection is given a brief heading. Each heading should appear on its own separate line. Subsections should be used as much as possible when cross-referencing text: refer to the subsection by heading as opposed to simply 'the text'.
Headings for experimental papers should follow the usual conventions: Introduction, Methods, Results, Discussion, Acknowledgments. Other papers may be subdivided as the authors desire. The use of headings enhances readability.
Essential title page information
• Title. Concise and informative. Titles are often used in information-retrieval systems. Avoid abbreviations and formulae where possible.
• Author names and affiliations. Where the family name may be ambiguous (e.g., a double name), please indicate this clearly. Present the authors' affiliation addresses (where the actual work was done) below the names. Indicate all affiliations with a lower-case superscript letter immediately after the author's name and in front of the appropriate address. Provide the full postal address of each affiliation, including the country name and, if available, the e-mail address of each author.
• Corresponding author. Clearly indicate who will handle correspondence at all stages of refereeing and publication, also post-publication. Ensure that telephone and fax numbers (with country and area code) are provided in addition to the e-mail address and the complete postal address. Contact details must be kept up to date by the corresponding author.
• Present/permanent address. If an author has moved since the work described in the article was done, or was visiting at the time, a 'Present address' (or 'Permanent address') may be indicated as a footnote to that author's name. The address at which the author actually did the work must be retained as the main, affiliation address. Superscript Arabic numerals are used for such footnotes.
Abstract
A concise and factual abstract is required. The abstract should state briefly the purpose of the research, the principal results and major conclusions. An abstract is often presented separately from the article, so it must be able to stand alone. For this reason, References should be avoided, but if essential, then cite the author(s) and year(s). Also, non-standard or uncommon abbreviations should be avoided, but if essential they must be defined at their first mention in the abstract itself.
Keywords
Immediately after the abstract, provide a maximum of 6 keywords, using American spelling and avoiding general and plural terms and multiple concepts (avoid, for example, 'and', 'of'). Be sparing with abbreviations: only abbreviations firmly established in the field may be eligible. These keywords will be used for indexing purposes.
Abbreviations
Avoid abbreviations in the title and abstract. All unusual abbreviations should be fully explained at their first occurrence in the text.
Acknowledgements
Collate acknowledgements in a separate section at the end of the article before the references and do not, therefore, include them on the title page, as a footnote to the title or otherwise. List here those individuals who provided help during the research (e.g., providing language help, writing assistance or proof reading the article, etc.).
Nomenclature and units
Proprietary names of drugs, instruments etc. should be indicated by the use of initial capital letters. All measurements should be expressed in SI or SI-derived units.
Artwork
Electronic artwork
General points
• Make sure you use uniform lettering and sizing of your original artwork.
• Save text in illustrations as 'graphics' or enclose the font.
• Only use the following fonts in your illustrations: Arial, Courier, Times, Symbol.
• Number the illustrations according to their sequence in the text.
• Use a logical naming convention for your artwork files.
• Provide captions to illustrations separately.
• Produce images near to the desired size of the printed version.
• Submit each figure as a separate file.
A detailed guide on electronic artwork is available on our website:
http://www.elsevier.com/artworkinstructions
You are urged to visit this site; some excerpts from the detailed information are given here.
Formats
Regardless of the application used, when your electronic artwork is finalised, please 'save as' or convert the images to one of the following formats (note the resolution requirements for line drawings, halftones, and line/halftone combinations given below):
EPS: Vector drawings. Embed the font or save the text as 'graphics'.
TIFF: Color or grayscale photographs (halftones): always use a minimum of 300 dpi.
TIFF: Bitmapped line drawings: use a minimum of 1000 dpi.
TIFF: Combinations bitmapped line/half-tone (color or grayscale): a minimum of 500 dpi is required.
If your electronic artwork is created in a Microsoft Office application (Word, PowerPoint, Excel) then please supply 'as is'.
Please do not:
• Supply files that are optimised for screen use (e.g., GIF, BMP, PICT, WPG); the resolution is too low;
• Supply files that are too low in resolution;
• Submit graphics that are disproportionately large for the content.
Where illustrations must include recognisable individuals, living or dead and of whatever age, great care must be taken to ensure that consent for publication has been given. It is the authors' responsibility to obtain written permission to reproduce borrowed material (illustrations and tables) from the original publishers and authors.
Color artwork
Please make sure that artwork files are in an acceptable format (TIFF, EPS or MS Office files) and with the correct resolution. If, together with your accepted article, you submit usable color figures then Elsevier will ensure, at no additional charge, that these figures will appear in color on the Web (e.g., ScienceDirect and other sites) regardless of whether or not these illustrations are reproduced in color in the printed version. For color reproduction in print, you will receive information regarding the costs from Elsevier after receipt of your accepted article. Please indicate your preference for color: in print or on the Web only. For further information on the preparation of electronic artwork, please see http://www.elsevier.com/artworkinstructions.
Please note: Because of technical complications which can arise by converting color figures to 'gray scale' (for the printed version should you not opt for color in print) please submit in addition usable black and white versions of all the color illustrations.
Tables
Number tables consecutively in accordance with their appearance in the text. Place footnotes to tables below the table body and indicate them with superscript lowercase letters. Avoid vertical rules. Be sparing in the use of tables and ensure that the data presented in tables do not duplicate results described elsewhere in the article.
Web references
Refrain from using online references if possible. When referring to internet sources, for example Wikipedia, please state so clearly, and indicate if this information can be checked and on which date you visited this online source.
Reference style
Text: Indicate references by superscript numbers in the text. The actual authors can be referred to, but the reference number(s) must always be given.
List: Number the references in the list in the order in which they appear in the text.
Examples:
Reference to a journal publication:
1. Van der Geer J, Hanraads JAJ, Lupton RA. The art of writing a scientific article. J Sci Commun 2010;163:51–9.
Reference to a book:
2. Strunk Jr W, White EB. The elements of style. 4th ed. New York: Longman; 2000.
Reference to a chapter in an edited book:
3. Mettam GR, Adams LB. How to prepare an electronic version of your article. In: Jones BS, Smith RZ, editors. Introduction to the electronic age, New York: E-Publishing Inc; 2009, p. 281–304.
Note shortened form for last page number. e.g., 51–9, and that for more than 6 authors the first 6 should be listed followed by 'et al.' For further details you are referred to 'Uniform Requirements for Manuscripts submitted to Biomedical Journals' (J Am Med Assoc 1997;277:927–34) (see also http://www.nlm.nih.gov/bsd/uniform_requirements.html).
Video data
Elsevier accepts video material and animation sequences to support and enhance your scientific research. Authors who have video or animation files that they wish to submit with their article are strongly encouraged to include these within the body of the article. This can be done in the same way as a figure or table by referring to the video or animation content and noting in the body text where it should be placed. All submitted files should be properly labeled so that they directly relate to the video file's content. In order to ensure that your video or animation material is directly usable, please provide the files in one of our recommended file formats with a preferred maximum size of 50 MB. Video and animation files supplied will be published online in the electronic version of your article in Elsevier Web products, including ScienceDirect: http://www.sciencedirect.com. Please supply 'stills' with your files: you can choose any frame from the video or animation or make a separate image. These will be used instead of standard icons and will personalize the link to your video data. For more detailed instructions please visit our video instruction pages at http://www.elsevier.com/artworkinstructions. Note: since video and animation cannot be embedded in the print version of the journal, please provide text for both the electronic and the print version for the portions of the article that refer to this content.
Supplementary data
Elsevier accepts electronic supplementary material to support and enhance your scientific research. Supplementary files offer the author additional possibilities to publish supporting applications, high-resolution images, background datasets, sound clips and more. Supplementary files supplied will be published online alongside the electronic version of your article in Elsevier Web products, including ScienceDirect: http://www.sciencedirect.com. In order to ensure that your submitted material is directly usable, please provide the data in one of our recommended file formats. Authors should submit the material in electronic format together with the article and supply a concise and descriptive caption for each file. For more detailed instructions please visit our artwork instruction pages at http://www.elsevier.com/artworkinstructions.
Submission checklist
The following list will be useful during the final checking of an article prior to sending it to the journal for review. Please consult this Guide for Authors for further details of any item.
Ensure that the following items are present:
One author has been designated as the corresponding author with contact details:
• E-mail address
• Full postal address
• Telephone and fax numbers
All necessary files have been uploaded, and contain:
• Keywords
• All figure captions
• All tables (including title, description, footnotes)
Further considerations
• Manuscript has been 'spell-checked' and 'grammar-checked'
• References are in the correct format for this journal
• All references mentioned in the Reference list are cited in the text, and vice versa
• Permission has been obtained for use of copyrighted material from other sources (including the Web)
• Color figures are clearly marked as being intended for color reproduction on the Web (free of charge) and in print, or to be reproduced in color on the Web (free of charge) and in black-and-white in print
• If only color on the Web is required, black-and-white versions of the figures are also supplied for printing purposes
For any further information please visit our customer support site at http://support.elsevier.com.
Use of the Digital Object Identifier
The Digital Object Identifier (DOI) may be used to cite and link to electronic documents. The DOI consists of a unique alpha-numeric character string which is assigned to a document by the publisher upon the initial electronic publication. The assigned DOI never changes. Therefore, it is an ideal medium for citing a document, particularly 'Articles in press' because they have not yet received their full bibliographic information. The correct format for citing a DOI is shown as follows (example taken from a document in the journal Physics Letters B):
doi:10.1016/j.physletb.2010.09.059
When you use the DOI to create URL hyperlinks to documents on the web, the DOIs are guaranteed never to change.
Proofs
One set of page proofs (as PDF files) will be sent by e-mail to the corresponding author (if we do not have an e-mail address then paper proofs will be sent by post) or, a link will be provided in the e-mail so that authors can download the files themselves. Elsevier now provides authors with PDF proofs which can be annotated; for this you will need to download Adobe Reader version 7 (or higher) available free from http://get.adobe.com/reader. Instructions on how to annotate PDF files will accompany the proofs (also given online). The exact system requirements are given at the Adobe site: http://www.adobe.com/products/reader/tech-specs.html.
If you do not wish to use the PDF annotations function, you may list the corrections (including replies to the Query Form) and return them to Elsevier in an e-mail. Please list your corrections quoting line number. If, for any reason, this is not possible, then mark the corrections and any other comments (including replies to the Query Form) on a printout of your proof and return by fax, or scan the pages and e-mail, or by post. Please use this proof only for checking the typesetting, editing, completeness and correctness of the text, tables and figures. Significant changes to the article as accepted for publication will only be considered at this stage with permission from the Editor. We will do everything possible to get your article published quickly and accurately – please let us have all your corrections within 48 hours. It is important to ensure that all corrections are sent back to us in one communication: please check carefully before replying, as inclusion of any subsequent corrections cannot be guaranteed. Proofreading is solely your responsibility. Note that Elsevier may proceed with the publication of your article if no response is received.
Offprints
The corresponding author, at no cost, will be provided with a PDF file of the article via e-mail. For an extra charge, paper offprints can be ordered via the offprint order form which is sent once the article is accepted for publication. The PDF file is a watermarked version of the published article and includes a cover sheet with the journal cover image and a disclaimer outlining the terms and conditions of use.
Author orders
When your article is published, you can commemorate your publication with printed author copies of the journal issue, customized full-color posters, extra offprints, and more. Please visit http://webshop.elsevier.com to learn more.
Editorial Board
Editor-in-Chief:
J. Jason Payne-James
Southminster, Essex, UK, Email: jasonpaynejames@aol.com
Associate Editor (North America):
S.B. Karch
Berkeley, USA
Associate Editor (Legal):
A. Keogh
Atherton, UK
Associate Editor (Asia):
P. Beh
Hong Kong, China
Editorial Committee:
N. Clements
Leeds, UK
G.A. Norfolk
Bristol, UK
M.M. Stark
Sydney, Australia
C. White
Manchester, UK
International Editorial Board:
A. Aggrawal
New Delhi, India
D. Alempijevic
Belgrade, Serbia
R. Beran
Chatswood, NSW, Austria
B.L. Bhootra
Polokwane, South Africa
S. Black
Dundee, UK
A. Busuttil
Edinburgh, UK
R. Byard
Adelaide, SA, Australia
J. Clark
Glasgow, UK
D. Cusack
Dublin, Ireland
C.G.M. Fernie
Glasgow, UK
J.A.M. Gall
Victoria, Australia
G.H. Gudjonsson
London, UK
A.W. Jones
Linköping, Sweden
S.E. Josse
London, UK
T. Kahana
Tel Aviv, Israel
C. Lincoln
Surfer's Paradise, Qld, Australia
P. Marks
Leeds, UK
A. Moynham
Sydney, Australia
O.P. Murty
New Delhi, India
K. Nadesan
Newcastle, Australia
M. Odell
Victoria, Australia
D. Pounder
Dundee, UK
S.P. Robinson
Inverness-shire, UK
G.N. Rutty
Leicester, UK
P. Saukko
Turku, Finland
D.R.A. Uges
Groningen, The Netherlands
D.N. Viera
Coimbra, Portugal
D. Wells
Victoria, Australia
J. Wyatt
Cornwall, UK
|
刊名字顺( Alphabetical List of Journals):
返回页首 