期刊名称：MYCOLOGICAL PROGRESS
 期刊简介(About the journal)
投稿须知(Instructions to Authors)
编辑部信息(Editorial Board)
About the journal
Aims and scope
Mycological Progress publishes papers on all aspects of fungi, including lichens. While Review Papers are highly welcome, the main focus is on Research Articles on
- Taxonomy and Systematics
- Evolution
- Cell Biology
- Ecology
- Biotechnology
- Pathology (plants, animals, humans)
Manuscripts on current methods applied in, e.g., morphology, anatomy, ultrastructure (TEM, SEM), genetics, molecular biology, chemistry, and physiology will also be considered.
Abstracted/Indexed in:
Academic OneFile, AGRICOLA, Biological Abstracts, BIOSIS, CAB Abstracts, CAB International, CSA/Proquest, Current Awareness in Biological Sciences (CABS), Current Contents/ Agriculture, Biology & Environmental Sciences, Elsevier Biobase, EMBiology, Gale, Global Health, Google Scholar, Journal Citation Reports/Science Edition, OCLC, Science Citation Index Expanded (SciSearch), SCOPUS, Summon by Serial Solutions, Zoological Record
Instructions to Authors
Editorial Procedure
Manuscript preparation: All manuscripts are subject to peer review and copy editing. authors are encouraged to suggest up to 5 potential referees.
Short notes must not exceed 6 manuscript pages (ca. 26 880 characters, plus 1 table, 1 illustration) and should be accompanied by a brief explanation of their novelty and significance.
Before describing a new taxon consult the international code of Botanical Nomenclature’ (GREUTER et al. 2000), and the instructions published by KORF (1995). For color characterisations of fruitbodies or cultures apply to any color reference book, for example, KÜPPERS (1978), KORNERUP and WANSCHER (1978), MUNSELL (1966) or RIDGEWAY (1912); avoid any description as ‘coffee-brown, or ‘honey-yellow’. Numbers referring to color charts should always be accompanied by a descriptive part like ‘greenish yellow’, ‘bluish green’, or ‘yellow-brown’, etc. Measurements of structures should be given with exceptional dimensions in parentheses; avoid any dash in the parenthesis, e.g. (17)23-38(54) x (7)12-16(29) µm.
Lists of studied collections should be arranged alphabetically with respect to countries as the first item followed by state/province, town, locality, map co-ordinates, elevation, substrate, date of collection, collector, herbarium abbreviation in parentheses as indicated by HOLMGREN, HOLMGREN and BARNETT (1990), e.g.: Australia, WA, between Nannup and Augusta, Stewart Road, 3.7 km east of Brockman Highway, 34°10’36.7’’ S, 115°33’45.9’’ E, 150 m asl., Eucalyptus marginata (Jarrah), Eucalyptus calophylla (Marri) burnt forest, leg. R. Agerer and N. Bougher, 24. 8. 1999. Holotype (PERTH), Isotype (M). – New Zealand, Auckland, ....
Voucher specimens: Information must be provided where voucher specimens are deposited, irrespective whether a taxonomical work is submitted or any other study where species or strains have been investigated.
Alignment sequences will not be published unless they are essential. Authors must submit a CD containing aligned sequences for review purposes. It is required that new sequences and alignments be deposited in EMBL, TreeBASE or other publicly-accessible databases. Accession numbers for sequences and alignments must be provided before publication.
Manuscript submission
Manuscript Submission
Submission of a manuscript implies: that the work described has not been published before; that it is not under consideration for publication anywhere else; that its publication has been approved by all co-authors, if any, as well as by the responsible authorities – tacitly or explicitly – at the institute where the work has been carried out. The publisher will not be held legally responsible should there be any claims for compensation.
Permissions
Authors wishing to include figures, tables, or text passages that have already been published elsewhere are required to obtain permission from the copyright owner(s) for both the print and online format and to include evidence that such permission has been granted when submitting their papers. Any material received without such evidence will be assumed to originate from the authors.
Online Submission
Authors should submit their manuscripts online. Electronic submission substantially reduces the editorial processing and reviewing times and shortens overall publication times. Please follow the hyperlink “Submit online” on the right and upload all of your manuscript files following the instructions given on the screen.
Title page
Title Page
The title page should include:
- The name(s) of the author(s)
- A concise and informative title
- The affiliation(s) and address(es) of the author(s)
- The e-mail address, telephone and fax numbers of the corresponding author
Abstract
Please provide an abstract of 150 to 250 words. The abstract should not contain any undefined abbreviations or unspecified references.
Keywords
Please provide 4 to 6 keywords which can be used for indexing purposes.
Text
Text Formatting
Manuscripts should be submitted in Word.
- Use a normal, plain font (e.g., 10-point Times Roman) for text.
- Use italics for emphasis.
- Use the automatic page numbering function to number the pages.
- Do not use field functions.
- Use tab stops or other commands for indents, not the space bar.
- Use the table function, not spreadsheets, to make tables.
- Use the equation editor or MathType for equations.
Note: If you use Word 2007, do not create the equations with the default equation editor but use the Microsoft equation editor or MathType instead.
- Save your file in doc format. Do not submit docx files.
Manuscripts with mathematical content can also be submitted in LaTeX.
Headings
Please use no more than three levels of displayed headings.
Abbreviations
Abbreviations should be defined at first mention and used consistently thereafter.
Footnotes
Footnotes can be used to give additional information, which may include the citation of a reference included in the reference list. They should not consist solely of a reference citation, and they should never include the bibliographic details of a reference. They should also not contain any figures or tables.
Footnotes to the text are numbered consecutively; those to tables should be indicated by superscript lower-case letters (or asterisks for significance values and other statistical data). Footnotes to the title or the authors of the article are not given reference symbols.
Always use footnotes instead of endnotes.
Acknowledgments
Acknowledgments of people, grants, funds, etc. should be placed in a separate section before the reference list. The names of funding organizations should be written in full.
Specific remarks
Please arrange your manuscript as follows:
• Materials and methods
• Results
• Discussion
• Acknowledgement(s)
• References
• Tables
• Figure legends
Abbreviations should be defined at first mention in the abstract and again in the main body of the text and used consistently thereafter.
Symbols and units should be used in accordance with SI standards. Enzyme nomenclature has to refer to international standards, too. For decimal values a point and not a comma is used, e.g. ‘3.5’ not ‘3,5’.
Statistical analyses of data should be given, with the test of significance used and the estimate of probability.
Sources of reagents, supplies, and equipment should be indicated in parentheses (company, city, country). If the equipment has been modified or newly constructed by the authors a detailed instruction has to be described.
Dichotomous keys have to be represented with indentations, combining all species with the same set of main characters as one entity. Generic names in keys are repeated with their initials. The characteristics used have to match completely. Segregate a complex of features by a semicolon, e.g. characteristics of hyphae; of spores; etc.
1 Spores dark brown, warty
2 Hyphae amyloid, with clamps T. incognita
2* Hyphae not amyloid, clamps lacking
3 Rhizomorphs present; crystals octahedral; hyphae brownish, 3-4 µm diam., simple septa lacking
T. brunnea
3* Rhizomorphs lacking; crystals cubic; hyphae not brownish, 3.5-7 µm diam., simple septa present
T. anglica
1* Spores colourless, smooth
4 Fruitbody resupinate, poroid T. poriiformis
4* Fruitbody not resupinate
5 Basidia ...
6...
6* ...
5* Basidia ...
References
Citation
Cite references in the text by name and year in parentheses. Some examples:
- Negotiation research spans many disciplines (Thompson 1990).
- This result was later contradicted by Becker and Seligman (1996).
- This effect has been widely studied (Abbott 1991; Barakat et al. 1995; Kelso and Smith 1998; Medvec et al. 1993).
Reference list
The list of references should only include works that are cited in the text and that have been published or accepted for publication. Personal communications and unpublished works should only be mentioned in the text. Do not use footnotes or endnotes as a substitute for a reference list.
Reference list entries should be alphabetized by the last names of the first author of each work.
- Journal article
Gamelin FX, Baquet G, Berthoin S, Thevenet D, Nourry C, Nottin S, Bosquet L (2009) Effect of high intensity intermittent training on heart rate variability in prepubescent children. Eur J Appl Physiol 105:731-738. doi: 10.1007/s00421-008-0955-8
Ideally, the names of all authors should be provided, but the usage of “et al” in long author lists will also be accepted:
Smith J, Jones M Jr, Houghton L et al (1999) Future of health insurance. N Engl J Med 965:325–329
- Article by DOI
Slifka MK, Whitton JL (2000) Clinical implications of dysregulated cytokine production. J Mol Med. doi:10.1007/s001090000086
- Book
South J, Blass B (2001) The future of modern genomics. Blackwell, London
- Book chapter
Brown B, Aaron M (2001) The politics of nature. In: Smith J (ed) The rise of modern genomics, 3rd edn. Wiley, New York, pp 230-257
- Online document
Cartwright J (2007) Big stars have weather too. IOP Publishing PhysicsWeb. http://physicsweb.org/articles/news/11/6/16/1. Accessed 26 June 2007
- Dissertation
Trent JW (1975) Experimental acute renal failure. Dissertation, University of California
Always use the standard abbreviation of a journal’s name according to the ISSN List of Title Word Abbreviations, see
.
For authors using EndNote, Springer provides an output style that supports the formatting of in-text citations and reference list.
Tables
- All tables are to be numbered using Arabic numerals.
- Tables should always be cited in text in consecutive numerical order.
- For each table, please supply a table caption (title) explaining the components of the table.
- Identify any previously published material by giving the original source in the form of a reference at the end of the table caption.
- Footnotes to tables should be indicated by superscript lower-case letters (or asterisks for significance values and other statistical data) and included beneath the table body.
Artwork
For the best quality final product, it is highly recommended that you submit all of your artwork – photographs, line drawings, etc. – in an electronic format. Your art will then be produced to the highest standards with the greatest accuracy to detail. The published work will directly reflect the quality of the artwork provided.
Electronic Figure Submission
- Supply all figures electronically.
- Indicate what graphics program was used to create the artwork.
- For vector graphics, the preferred format is EPS; for halftones, please use TIFF format. MS Office files are also acceptable.
- Vector graphics containing fonts must have the fonts embedded in the files.
- Name your figure files with "Fig" and the figure number, e.g., Fig1.eps.
Line Art
- Definition: Black and white graphic with no shading.
- Do not use faint lines and/or lettering and check that all lines and lettering within the figures are legible at final size.
- All lines should be at least 0.1 mm (0.3 pt) wide.
- Scanned line drawings and line drawings in bitmap format should have a minimum resolution of 1200 dpi.
- Vector graphics containing fonts must have the fonts embedded in the files.
Halftone Art
- Definition: Photographs, drawings, or paintings with fine shading, etc.
- If any magnification is used in the photographs, indicate this by using scale bars within the figures themselves.
- Halftones should have a minimum resolution of 300 dpi.
Combination Art
- Definition: a combination of halftone and line art, e.g., halftones containing line drawing, extensive lettering, color diagrams, etc.
- Combination artwork should have a minimum resolution of 600 dpi.
Color Art
- Color art is free of charge for online publication.
- If black and white will be shown in the print version, make sure that the main information will still be visible. Many colors are not distinguishable from one another when converted to black and white. A simple way to check this is to make a xerographic copy to see if the necessary distinctions between the different colors are still apparent.
- If the figures will be printed in black and white, do not refer to color in the captions.
- Color illustrations should be submitted as RGB (8 bits per channel).
Figure Lettering
- To add lettering, it is best to use Helvetica or Arial (sans serif fonts).
- Keep lettering consistently sized throughout your final-sized artwork, usually about 2–3 mm (8–12 pt).
- Variance of type size within an illustration should be minimal, e.g., do not use 8-pt type on an axis and 20-pt type for the axis label.
- Avoid effects such as shading, outline letters, etc.
- Do not include titles or captions within your illustrations.
Figure Numbering
- All figures are to be numbered using Arabic numerals.
- Figures should always be cited in text in consecutive numerical order.
- Figure parts should be denoted by lowercase letters (a, b, c, etc.).
- If an appendix appears in your article and it contains one or more figures, continue the consecutive numbering of the main text. Do not number the appendix figures, "A1, A2, A3, etc." Figures in online appendices (Electronic Supplementary Material) should, however, be numbered separately.
Figure Captions
- Each figure should have a concise caption describing accurately what the figure depicts. Include the captions in the text file of the manuscript, not in the figure file.
- Figure captions begin with the term Fig. in bold type, followed by the figure number, also in bold type.
- No punctuation is to be included after the number, nor is any punctuation to be placed at the end of the caption.
- Identify all elements found in the figure in the figure caption; and use boxes, circles, etc., as coordinate points in graphs.
- Identify previously published material by giving the original source in the form of a reference citation at the end of the figure caption.
Figure Placement and Size
- When preparing your figures, size figures to fit in the column width.
- For most journals the figures should be 39 mm, 84 mm, 129 mm, or 174 mm wide and not higher than 234 mm.
- For books and book-sized journals, the figures should be 80 mm or 122 mm wide and not higher than 198 mm.
Permissions
If you include figures that have already been published elsewhere, you must obtain permission from the copyright owner(s) for both the print and online format. Please be aware that some publishers do not grant electronic rights for free and that Springer will not be able to refund any costs that may have occurred to receive these permissions. In such cases, material from other sources should be used.
Accessibility
In order to give people of all abilities and disabilities access to the content of your figures, please make sure that
- All figures have descriptive captions (blind users could then use a text-to-speech software or a text-to-Braille hardware)
- Patterns are used instead of or in addition to colors for conveying information (color-blind users would then be able to distinguish the visual elements)
- Any figure lettering has a contrast ratio of at least 4.5:1
Electronic Supplementary Material
Springer accepts electronic multimedia files (animations, movies, audio, etc.) and other supplementary files to be published online along with an article or a book chapter. This feature can add dimension to the author's article, as certain information cannot be printed or is more convenient in electronic form.
Submission
- Supply all supplementary material in standard file formats.
- Please include in each file the following information: article title, journal name, author names; affiliation and e-mail address of the corresponding author.
- To accommodate user downloads, please keep in mind that larger-sized files may require very long download times and that some users may experience other problems during downloading.
Audio, Video, and Animations
- Always use MPEG-1 (.mpg) format.
Text and Presentations
- Submit your material in PDF format; .doc or .ppt files are not suitable for long-term viability.
- A collection of figures may also be combined in a PDF file.
Spreadsheets
- Spreadsheets should be converted to PDF if no interaction with the data is intended.
- If the readers should be encouraged to make their own calculations, spreadsheets should be submitted as .xls files (MS Excel).
Specialized Formats
- Specialized format such as .pdb (chemical), .wrl (VRML), .nb (Mathematica notebook), and .tex can also be supplied.
Collecting Multiple Files
- It is possible to collect multiple files in a .zip or .gz file.
Numbering
- If supplying any supplementary material, the text must make specific mention of the material as a citation, similar to that of figures and tables.
- Refer to the supplementary files as “Online Resource”, e.g., "... as shown in the animation (Online Resource 3)", “... additional data are given in Online Resource 4”.
- Name the files consecutively, e.g. “ESM_3.mpg”, “ESM_4.pdf”.
Captions
- For each supplementary material, please supply a concise caption describing the content of the file.
Processing of supplementary files
- Electronic supplementary material will be published as received from the author without any conversion, editing, or reformatting.
Accessibility
In order to give people of all abilities and disabilities access to the content of your supplementary files, please make sure that
- The manuscript contains a descriptive caption for each supplementary material
- Video files do not contain anything that flashes more than three times per second (so that users prone to seizures caused by such effects are not put at risk)
Conflict of interest
All benefits in any form from a commercial party related directly or indirectly to the subject of this manuscript or any of the authors must be acknowledged. For each source of funds, both the research funder and the grant number should be given. This note should be added in a separate section before the reference list.
If no conflict exists, authors should state: The authors declare that they have no conflict of interest.
After acceptance
Upon acceptance of your article you will receive a link to the special Author Query Application at Springer’s web page where you can sign the Copyright Transfer Statement online and indicate whether you wish to order OpenChoice, offprints, or printing of figures in color.
Once the Author Query Application has been completed, your article will be processed and you will receive the proofs.
Open Choice
In addition to the normal publication process (whereby an article is submitted to the journal and access to that article is granted to customers who have purchased a subscription), Springer provides an alternative publishing option: Springer Open Choice. A Springer Open Choice article receives all the benefits of a regular subscription-based article, but in addition is made available publicly through Springer’s online platform SpringerLink. We regret that Springer Open Choice cannot be ordered for published articles.
Copyright transfer
Authors will be asked to transfer copyright of the article to the Publisher (or grant the Publisher exclusive publication and dissemination rights). This will ensure the widest possible protection and dissemination of information under copyright laws.
Open Choice articles do not require transfer of copyright as the copyright remains with the author. In opting for open access, they agree to the Springer Open Choice Licence.
Offprints
Offprints can be ordered by the corresponding author.
Color illustrations
Online publication of color illustrations is free of charge. For color in the print version, authors will be expected to make a contribution towards the extra costs.
Proof reading
The purpose of the proof is to check for typesetting or conversion errors and the completeness and accuracy of the text, tables and figures. Substantial changes in content, e.g., new results, corrected values, title and authorship, are not allowed without the approval of the Editor.
After online publication, further changes can only be made in the form of an Erratum, which will be hyperlinked to the article.
Online First
The article will be published online after receipt of the corrected proofs. This is the official first publication citable with the DOI. After release of the printed version, the paper can also be cited by issue and page numbers.
Editorial Board
Editor in Chief:
Franz Oberwinkler
Universität Tübingen
Institut für Evolution und Ökologie
Auf der Morgenstelle 1
72076 Tübingen
Germany
e-mail: franz.oberwinkler@uni-tuebingen.de
Managing Editor:
Angelika Honold
Universität Tübingen
Institut für Evolution und Ökologie
Auf der Morgenstelle 1
72076 Tübingen
Germany
e-mail: angelika.honold@uni-tuebingen.de
Reviews Editor:
Reinhard Agerer, Universität München, Germany
Editorial Board:
Timm Anke, Universität Kaiserslautern, Kaiserslautern, Germany
Takayuki Aoki, National Institute of Agrobiological Sciences, Ibaraki, Japan
Robert Bauer, Universität Tübingen, Tübingen, Germany
Mary L. Berbee, University of British Columbia, Vancouver, Canada
Reinhard Berndt, ETH Zürich, Zürich, Switzerland
Paul Blanz, Universität Graz, Graz, Austria
Neale L. Bougher, Dept. Conservation and Land Management, WA, Australia
Tom Bruns, University of California, Berkeley, CA, USA
Francois Buscot, Umweltforschungszentrum Leipzig Halle, Halle, Germany
Chee-Jen Chen, Southern Taiwan University of Technology, Tainan, Taiwan
Rüdiger Hampp, Universität Tübingen, Tübingen, Germany
David S. Hibbett, Clark University, Worchester, Massachusetts, USA
Sybren de Hoog, Centraalbureau voor Schimmelcultures, Utrecht, The Netherlands
Regine Kahmann, Max-Planck-Institut für terrestrische Mikrobiologie, Marburg, Germany
Ingrid Kottke, Universität Tübingen, Tübingen, Germany
Alexander Kovalenko, V.L. Komarov Institute of Botany, Saint Petersburg, Russia
Lene Lange, Molecular Biotechnology, Bagsvaerd, Denmark
Karl-Hendrik Larsson, Göteborg University, Göteborg, Sweden
Ji-Kai Liu, Chinese Academy of Sciences, Kunming, People´s Republic of China
Kerry O´Donnell, National Center for Agricultural Utilization Research, Peoria, Illinois, USA
Erast Parmasto, Estonian Agricultural University, Tartu, Estonia
Meike Piepenbring, Universität Frankfurt, Frankfurt, Germany
Hansjörg Prillinger, Universität für Bodenkultur, Wien, Austria
Gerhard Rambold, Universität Bayreuth, Bayreuth, Germany
Dirk Redecker, University of Basel, Basel, Switzerland
Peter Roberts, Royal Botanical Gardens, Surrey, UK
Leif Ryvarden, University of Oslo, Oslo, Norway
José Paulo Sampaio, Universidade Nova de Lisboa, Lisbon, Portugal
Gary J. Samuels, United States Dept. of Agriculture ARS, Beltsville, USA
Gero Steinberg, University of Exeter, Exeter, UK
Andy F.S. Taylor, Swedish University of Agricultural Sciences, Uppsala, Sweden
Mauro Tretiach, Università degli Studi die Trieste, Trieste, Italy
Dagmar Triebel, Botanische Staatssammlung, München, Germany
Else C. Vellinga, University of California at Berkeley, Berkeley, USA
Roy Watling, Royal Botanical Garden, Edinburgh, Scotland, UK
Michael J. Wingfield, University of Pretoria, Pretoria, South Africa
Zhu L. Yang, Kunming Institute of Botany, Academia Sinica, Kunming, People´s Republic of China
|
刊名字顺( Alphabetical List of Journals):
返回页首 