期刊名称：BULLETIN OF EARTHQUAKE ENGINEERING
 期刊简介(About the journal)
投稿须知(Instructions to Authors)
编辑部信息(Editorial Board)
About the journal
Description
...Now listed in ISI...
Bulletin of Earthquake Engineering - the Official Publication of the European Association for Earthquake Engineering is devoted to original and interdisciplinary, peer-reviewed papers on theoretical and applied research related to the broad spectrum of earthquake engineering with similar emphasis on all topics. Earthquake risk mitigation requires close interaction between different scientific and operational disciplines encouraging and motivating joint research and implementation aiming to advance the state-of-the-art and state-of-the-practice.
The journal provides a forum for the European Earthquake Engineering Community to present and discuss matters of major interest e.g. important European damaging earthquakes, new developments in earthquake regulations, national policies applied after the occurrence of major seismic events (for example strengthening of existing buildings, etc.).
It is the incentive to keep the review period for scripts submitted to the journal to a minimum and to publish contributions in the form of original and review papers, or as short technical notes.
Topics that fit to the broad spectrum of BEE include but are not necessarily restricted to:
Seismic hazard studies and methods for mitigation of earthquake risks; Earthquake source mechanism and strong motion characterization and their use for engineering applications; Response and analysis of geological and geotechnical site conditions under earthquake excitations; Cyclic behaviour of soils; Response, analysis and design of earth structures and foundations under seismic conditions; Zonation and microzonation methodologies; Earthquake scenarios and vulnerability assessments; Earthquake codes and improvements; Response, analysis and design of all man-made structures under seismic conditions; Performance based seismic evaluation and design; Repair and strengthening; Damage assessments; Transportation and lifeline systems in seismic environments; Seismic response of historical monuments and structures; Seismic isolation, passive energy dissipation, active control of vibrations and other modern technologies for energy dissipation; Earthquake risk mitigation policies and methodologies.
Abstracted/Indexed in:
Current Contents/Engineering, Computing and Technology, GeoArchive, ISI/Current Contents, Science Citation Index Expanded, SCOPUS
Instructions to Authors
|
Instructions for Authors
Bulletin of Earthquake Engineering
Online Manuscript Submission
Springer now offers authors, editors and reviewers of Bulletin of Earthquake Engineering the option of using our fully web-enabled online manuscript submission and review system. To keep the review time as short as possible (no postal delays!), we encourage authors to submit manuscripts online to the journal‘s editorial office. Our online manuscript submission and review system offers authors the option to track the progress of the review process of manuscripts in real time. Manuscripts should be submitted to: http://beee.edmgr.com The online manuscript submission and review system for Bulletin of Earthquake Engineering offers easy and straightforward log-in and submission procedures. This system supports a wide range of submission file formats: for manuscripts - Word, WordPerfect, RTF, TXT and LaTex; for figures - TIFF, GIF, JPEG, EPS, PPT, and Postscript.NOTE: By using the online manuscript submission and review system, it is NOT necessary to submit the manuscript also in printout + disk. In case you encounter any difficulties while submitting your manuscript on line, please get in touch with the responsible Editorial Assistant by clicking on “CONTACT US?from the tool bar. Electronic figuresElectronic versions of your figures must be supplied. For vector graphics, EPS is the preferred format. For bitmapped graphics, TIFF is the preferred format. The following resolutions are optimal: line figures - 600 - 1200 dpi; photographs - 300 dpi; screen dumps - leave as is. Colour figures can be submitted in the RGB colour system. Font-related problems can be avoided by using standard fonts such as Times Roman, Courier and Helvetica.Colour figuresSpringer offers two options for reproducing colour illustrations in your article. Please let us know what you prefer: 1) Free online colour. The colour figure will only appear in colour on www.springer.com and not in the printed version of the journal. 2) Online and printed colour. The colour figures will appear in colour on our website and in the printed version of the journal. The charges are EUR 950/USD 1150 per article.LanguageWe appreciate any efforts that you make to ensure that the language is corrected before submission. This will greatly improve the legibility of your paper if English is not your first language.
Manuscript Presentation
Manuscripts should be typewritten on A4 or US Letter bond paper, one side only, leaving adequate margins on all sides to allow reviewers' remarks. Please double-space all material, including notes and references. Quotations of more than 40 words should be set off clearly, either by indenting the left-hand margin or by using a smaller typeface. Use double quotation marks for direct quotations and single quotation marks for quotations within quotations and for words or phrases used in a special sense.Number the pages consecutively with the first page containing:?running head (shortened title) ?article type ?title ?author(s) ?affiliation(s) ?full address for correspondence, including telephone and fax number and e-mail address AbstractPlease provide a short abstract of 100 to 250 words. The abstract should not contain any undefined abbreviations or unspecified references.Key WordsPlease provide 5 to 10 key words or short phrases in alphabetical order.AbbreviationsAbbreviations and their explanations should be collected in a list.Section HeadingsSection headings should be numbered (e.g., 1., 1.1, 1.1.1, 2., 2.1, etc.).AppendicesSupplementary material should be collected in an Appendix and placed before the Notes and References.NotesPlease use endnotes rather than footnotes. Notes should be indicated by consecutive superscript numbers in the text and listed at the end of the article before the References. A source reference note should be indicated by means of an asterisk after the title. This note should be placed at the bottom of the first page.Cross-ReferencingIn the text, a reference identified by means of an author's name should be followed by the date of the reference in parentheses and page number(s) where appropriate. When there are more than two authors, only the first author's name should be mentioned, followed by "et al.". In the event that an author cited has had two or more works published during the same year, the reference, both in the text and in the reference list, should be identified by a lower-case letter like 'a' and 'b' after the date to distinguish the works. Examples:Winograd (1986, p. 204)(Winograd, 1986a, b)(Winograd, 1986; Flores et al., 1988)(Bullen and Bennett, 1990)AcknowledgementsAcknowledgements of people, grants, funds, etc. should be placed in a separate section before the References.
References
1. Journal article: Smith J, Jones M Jr, Houghton L et al (1999) Future of health insurance. N Engl J Med 965:325?292. Inclusion of issue number (optional):Saunders DS (1976) The biological clock of insects. Sci Am 234(2):114?21 3. Journal issue with issue editor:Smith J (ed) (1998) Rodent genes. Mod Genomics J 14(6):126?33 4. Journal issue with no issue editor:Mod Genomics J (1998) Rodent genes. Mod Genomics J 14(6):126?33 5. Book chapter:Brown B, Aaron M (2001) The politics of nature. In: Smith J (ed) The rise of modern genomics, 3rd edn. Wiley, New York 6. Book, authored:South J, Blass B (2001) The future of modern genomics. Blackwell, London 7. Book, edited: Smith J, Brown B (eds) (2001) The demise of modern genomics. Blackwell, London8. Chapter in a book in a series without volume titles:Schmidt H (1989) Testing results. In: Hutzinger O (ed) Handbook of environmental chemistry, vol 2E. Springer, Berlin Heidelberg New York, p 111 9. Chapter in a book in a series with volume title: Smith SE (1976) Neuromuscular blocking drugs in man. In: Zaimis E (ed) Neuromuscular junction. Handbook of experimental pharmacology, vol 42. Springer, Berlin Heidelberg New York, pp593?60 10. Proceedings as a book (in a series and subseries):Zowghi D et al (1996) A framework for reasoning about requirements in evolution. In: Foo N, Goebel R (eds) PRICAI'96: topics in artificial intelligence. 4th Pacific Rim conference on artificial intelligence, Cairns, August 1996. Lecture notes in computer science (Lecture notes in artificial intelligence), vol 1114. Springer, Berlin Heidelberg New York, p 157 11. Proceedings with an editor (without a publisher):Aaron M (1999) The future of genomics. In: Williams H (ed) Proceedings of the genomic researchers, Boston, 1999 12. Proceedings without an editor (without a publisher): Chung S-T, Morris RL (1978) Isolation and characterization of plasmid deoxyribonucleic acid from Streptomyces fradiae. In: Abstracts of the 3rd international symposium on the genetics of industrial microorganisms, University of Wisconsin, Madison, 4? June 1978 13. Paper presented at a conference: Chung S-T, Morris RL (1978) Isolation and characterization of plasmid deoxyribonucleic acid from Streptomyces fradiae. Paper presented at the 3rd international symposium on the genetics of industrial microorganisms, University of Wisconsin, Madison, 4? June 1978 14. Patent: Name and date of patent are optional Norman LO (1998) Lightning rods. US Patent 4,379,752, 9 Sept 1998 15. Dissertation: Trent JW (1975) Experimental acute renal failure. Dissertation, University of California 16. Institutional author (book):International Anatomical Nomenclature Committee (1966) Nomina anatomica. Excerpta Medica, Amsterdam 17. Non-English publication cited in an English publication:Wolf GH, Lehman P-F (1976) Atlas der Anatomie, vol 4/3, 4th edn. Fischer, Berlin. [NB: Use the language of the primary document, not that of the reference for "vol" etc.!] 18. Non-Latin alphabet publication:The English translation is optional. Marikhin VY, Myasnikova LP (1977) Nadmolekulyarnaya struktura polimerov (The supramolecular structure of polymers). Khimiya, Leningrad 19. Published and In press articles with or without DOI: 19.1 In pressWilson M et al (2006) References. In: Wilson M (ed) Style manual. Springer, Berlin Heidelberg New York (in press) 19.2. Article by DOI (with page numbers) Slifka MK, Whitton JL (2000) Clinical implications of dysregulated cytokine production. J Mol Med 78:74?0. DOI 10.1007/s001090000086 19.3. Article by DOI (before issue publication with page numbers) Slifka MK, Whitton JL (2000) Clinical implications of dysregulated cytokine production. J Mol Med (in press). DOI 10.1007/s001090000086 19.4. Article in electronic journal by DOI (no paginated version) Slifka MK, Whitton JL (2000) Clinical implications of dysregulated cytokine production. Dig J Mol Med. DOI 10.1007/s801090000086 20. Internet publication/Online document Doe J (1999) Title of subordinate document. In: The dictionary of substances and their effects. Royal Society of Chemistry.Available via DIALOG. http://www.rsc.org/dose/title of subordinate document. Cited 15 Jan 1999 20.1. Online database Healthwise Knowledgebase (1998) US Pharmacopeia, Rockville. http://www.healthwise.org. Cited 21 Sept 1998 Supplementary material/private homepage Doe J (2000) Title of supplementary material. http://www.privatehomepage.com. Cited 22 Feb 2000 University site Doe J (1999) Title of preprint. http://www.uni-heidelberg.de/mydata.html. Cited 25 Dec 1999 FTP site Doe J (1999) Trivial HTTP, RFC2169. ftp://ftp.isi.edu/in-notes/rfc2169.txt. Cited 12 Nov 1999 Organization site ISSN International Centre (1999) Global ISSN database. http://www.issn.org. Cited 20 Feb 2000Figures
|
All photographs, graphs and diagrams should be referred to as a 'Figure' and they should be numbered consecutively (1, 2, etc.). Multi−part figures ought to be labeled with lower case letters (a, b, etc.). Please insert keys and scale bars directly in the figures. Relatively small text and great variation in text sizes within figures should be avoided as figures are often reduced in size. Figures may be sized to fit approximately within the column(s) of the journal. Provide a detailed legend (without abbreviations) to each figure, refer to the figure in the text and note its approximate location in the margin. Please place the legends in the manuscript after the references. | Tables
|
Each table should be numbered consecutively (I, II, etc.). In tables, footnotes are preferable to long explanatory material in either the heading or body of the table. Such explanatory footnotes, identified by superscript letters, should be placed immediately below the table. Please provide a caption (without abbreviations) to each table, refer to the table in the text and note its approximate location in the margin. Finally, please place the tables after the figures legends in the manuscript. |
Electronic Supplementary Material
Electronic Supplementary Material (ESM) for a paper will be published in the electronic edition of this journal provided the material is: - submitted in electronic form together with the manuscript - accepted after peer review: ESM may consist of:- information that cannot be printed: animations, video clips, sound recordings (use QuickTime, .avi, .mpeg, animated GIFs, or any other common file format)- information that is more convenient in electronic form: sequences, spectral data, etc. - large quantities of original data that relate to the paper, e.g., additional tables, large numbers of illustrations (color and black & white), etc. After acceptance for publication, ESM will be published as received from the author in the online version only. Reference will be given in the printed version
Proofs
Proofs will be sent to the corresponding author by e−mail.Your response, with or without corrections, should be sent within 72 hours.
Offprints
Fifty offprints of each article will be provided free of charge. Additional offprints can be ordered by means of an offprint order form supplied with the proofs.
Page Charges and Colour Figures
No page charges are levied on authors or their institutions except for colour pages. The author will be contacted regarding costs and invoicing if the manuscript includes colour figures.
Copyright
Authors will be asked, upon acceptance of an article, to transfer copyright of the article to the Publisher. This will ensure the widest possible dissemination of information under copyright laws.
Permissions
It is the responsibility of the author to obtain written permission for a quotation from unpublished material, or for all quotations in excess of 250 words in one extract or 500 words in total from any work still in copyright, and for the reprinting of figures, tables or poems from unpublished or copyrighted material.
Springer Open Choice
In addition to the normal publication process (whereby an article is submitted to the journal and access to that article is granted to customers who have purchased a subscription), Springer now provides an alternative publishing option: Springer Open Choice. A Springer Open Choice article receives all the benefits of a regular subscription−based article, but in addition is made available publicly through Springers online platform SpringerLink. To publish via Springer Open Choice, upon acceptance please click on the link below to complete the relevant order form and provide the required payment information. Payment must be received in full before publication or articles will publish as regular subscription−model articles. We regret that Springer Open Choice cannot be ordered for published articles.
Additional Information
Additional information can be obtained from:Bulletin of Earthquake EngineeringSpringerP.O. Box 173300 AA DordrechtThe NetherlandsFax: +31−78−6576254Internet:
|
|
E-content
For authors and editors
/* */
Additional information
Other contacts
Related subjects
/* */ |
|
Editorial Board
Editorial Board
Editor:
Atilla Ansal
Kandilli Observatory and Earthquake Research Institute, Bogaziçi University, Istanbul, Turkey
Editorial Board:
Nicholas N. Ambraseys, Imperial College, London, UK;
Nuray Aydinoglu, KOERI, Bogaziçi University, Istanbul, Turkey;
Pierre-Yves Bard, Charg?de Mission risque sismique au LCPC, Grenoble, France;
Philippe Bisch, Sechaud et Metz, Fontenay-aux-Roses, France;
Franco Braga, University of Rome "La Sapienza", Italy;
Alberto Castellani, Politecnico di Milano, Italy;
Panayotis Gr. Carydis, National Technical University of Athens, Greece;
Mauro Dolce, University of Basilicata, Potenza, Italy;
Jacob M. Eisenberg, Earthquake Engineering Research Center, Moscow, Russia;
Peter Fajfar, University of Ljubljana, Slovenia;
Michael Fardis, University of Patras, Greece;
Rainer Flesch, Arsenal Research, Vienna, Austria;
George Gazetas, National Technical University of Athens, Greece;
Emilia Juhasova, Institute of Construction and Architecture, Bratislava, Slovakia;
Faruk Karadogan, Istanbul Technical University, Turkey;
Martin Koller, Résonance Ingénieurs-Conseils SA, Geneva, Switzerland;
Alberto Marcellini, IDPA-CNR, Milano, Italy;
Alessandro Martelli, ENEA, Bologna, Italy;
Farrokh Nadim, Norwegian Geotechnical Institute, Oslo, Norway;
Carlos Sousa Oliveira, Instituto Superior Tecnico, Lisboa, Portugal;
Alain Pecker, Géodynamique et Structure, Bagneux, France;
Pedro Seco e Pinto, National Laboratory of Civil Engineering, Lisboa, Portugal;
Kyriazis Pitilakis, Aristotle University of Thessaloniki, Greece;
Avigdor V. Rutenberg, Technion, Haifa, Israel;
Ragnar Sigbjörnsson, University of Iceland, Reykjavik, Iceland;
Roy T. Severn, University of Bristol, UK;
Robin Spence, University of Cambridge, UK;
Costas Syrmakezis, National Technical University of Athens, Greece;
Miha Tomazevic, Slovenian National Building and Civil Engineering Institute, Ljubljana, Slovenia
|
刊名字顺( Alphabetical List of Journals):
返回页首 