期刊名称：OCEAN MODELLING
 期刊简介(About the journal)
投稿须知(Instructions to Authors)
编辑部信息(Editorial Board)
About the journal
Description
The main objective of Ocean Modelling is to provide rapid communication between those interested in ocean modelling, whether through direct observation, or through analytical, numerical or laboratory models. Because of the intimate links between ocean and atmosphere, involvement of scientists interested in influences of either medium on the other is welcome. The journal has a wide scope and includes ocean-atmosphere interaction in various forms as well as pure ocean results. In addition to peer-reviewed papers, the journal provides preliminary communications and discussions. Authors are invited to submit datafiles, model animations or other electronic-only information in support of their submission.
To speed up the review process, all authors are requested to submit their paper electronically.
Ocean Modelling is the successor of the SCOR WG 49 newsletter. In 1999, the journal was relaunched as peer-reviewed journal, focussing on fast electronic publication of articles, supported by non (paper) publishable, electronic items.
Audience
Marine scientists, marine technologists, ocean & coastal engineers, atmospheric scientists, modellers, data managers and computer scientists.
Instructions to Authors
General Information
Ocean Modelling accepts:
Primary and review articles
Preliminary results
Discussion papers
News items
It is essential to provide a fax number and e-mail address when submitting a manuscript. Articles must be written in good English.
Submission of an article is understood to imply that the article has not been published previously (except in the form of an abstract or as part of a published lecture or academic thesis), that it is not under consideration for publication elsewhere, that its publication is approved by all Authors and tacitly or explicitly by the responsible authorities where the work was carried out, and that, if accepted, it will not be published elsewhere in the same form, in English or in any other language, without the written consent of the Publisher.
Submission of papers
Ocean Modelling uses an online, electronic submission system. By accessing the website http://ees.elsevier.com/ocemod, authors will be guided stepwise through the submission process and uploading of the various files. When submitting a manuscript to Elsevier Editorial System, authors need to provide an electronic version of their manuscript. For this purpose original source files, not PDF files, are preferred. The author should specify a category designation for the manuscript (full length article, review article, short communication, etc.). Authors may send queries concerning the submission process to the Author Support Department. Once the submission files are uploaded, the system automatically generates an electronic (PDF) manuscript, which is then used for reviewing. All correspondence, including the Editor's decision and request for revisions, will be by e-mail.
To help you assess the relevance of this journal to your proposed submission, please see the Aims and Scope, and visit the Journal website www.elsevier.com/locate/ocemod. Submissions are welcomed from all branches of marine science. Please contact the Editor directly in relation to News items.
Copyright
Upon acceptance of an article by the journal, Author(s) will be asked to transfer copyright (for more information on copyright see http://authors.elsevier.com. This transfer will ensure the widest possible dissemination of information. A letter will be sent to the corresponding Author confirming receipt of the manuscript. A form facilitating transfer of copyright will be provided. If excerpts from other copyrighted works are included, the Author(s) must obtain written permission from the copyright owners and credit the source(s) in the article. Elsevier has preprinted forms for use by Authors in these cases: contact Elsevier's Rights Department, Oxford, UK: phone (+44) 1865 84830, fax (+44) 1865 853333, email permissions@elsevier.com. Requests may also be completed on-line via the Elsevier homepage http://www.elsevier.com/locate/permissions.
Preparation of Texts
We accept most word processing formats for accepted articles, but Word, WordPerfect or LaTeX is preferred. Always keep a backup copy of the electronic file for reference and safety. Save your files using the default extension of the program used. No changes to the accepted version are permissible without the explicit approval of the Editor. It is important that the file be saved in the native format of the word processor used. The text should be in single-column format. Keep the layout as simple as possible. Most formatting codes will be removed and replaced on processing the article. In particular, do not use the wordprocessor's options to justify text or to hyphenate words. However, do use bold face, italics, subscripts, superscripts etc. Do not embed 'graphically designed' equations or tables, but prepare these using the wordprocessor's facility. When preparing tables, if you are using a table grid, use only one grid for each individual table and not a grid for each row. If no grid is used, use tabs, not spaces, to align columns. The electronic text should be prepared in a way very similar to that of conventional manuscripts (also see the Author Gateway's Quickguide: http://authors.elsevier.com). Do not import the figures into the text file, but, instead, indicate their approximate locations directly in the electronic text and on the manuscript. Also see the section on Preparation of electronic illustrations.
LaTeX documents
If the LaTeX file is suitable, proofs will be produced without rekeying the text. The article should preferably be written using Elsevier's document class "elsart", or alternatively the standard document class "article", The Elsevier LaTeX package (including detailed instructions for LaTeX preparation) can be obtained from the Author Gate-way's Quickguide: http://www.elsevier.com/locate/latex. It consists of the files: elsart.cls, guidelines for users of elsart, a template file for quick start and the instruction booklet "Preparing articles with LaTeX.
Presentation of Manuscript
General
Please write your text in good English (American or British usage is accepted, but not a mixture of these). Authors whose native language is not English are recommended to seek the advice of a colleague who has English as their mother tongue.
English Language help service: upon request, Elsevier will direct authors to an agent who can check and improve the English of their paper (before submission). Please contact authorsupport@elsevier.com for further information.
Provide the following data on the title page (in the order given)
Title
Concise and informative. Titles are often used in information-retrieval systems. Avoid abbreviations and formulae where possible.
Author names and affiliations
Where the family name may be ambiguous (e.g., a double name), please indicate this clearly. Present the authors' affiliation addresses (where the actual work was done) below the names. Indicate all affiliations with a lower-case superscript letter immediately after the author's name and in front of the appropriate address. Provide the full postal address of each affiliation, including the country name, and, if available, the e-mail address of each author. Corresponding author
Clearly indicate who is willing to handle correspondence at all stages of refereeing and publication, also post-publication. Ensure that telephone and fax numbers (with country and area code) are provided in addition to the e-mail address and the complete postal address.
Present/permanent address
If an author has moved since the work described in the article was done, or was visiting at the time, a 'Present address' (or 'Permanent address') may be indicated as a footnote to that author's name. The address at which the author actually did the work must be retained as the main, affiliation address. Superscript Arabic numerals are used for such footnotes.
Abstract
A concise and factual abstract is required (maximum length 500 words.) The abstract should state briefly the purpose of the research, the methods used, the principal results and the main results. An abstract is often presented separate from the article, so it must be able to stand alone.
Keywords
Immediately after the abstract, provide up to six keywords, plus regional index terms. At least four of the subject keywords should be selected from the Aquatic Science & Fisheries Thesaurus. You may find a paper version in your library. The Regional Terms should be provided as a hierarchical string (eg: USA, California, Monterey Bay). Authors are also encouraged to submit geographic bounding coordinates at the end of the keyword string. These keywords will be used for indexing purposes.
Body of the article
Divide your article into clearly defined and numbered sections. Subsections should be numbered 1.1 (then 1.1.1, 1.1.2), 1.2, etc. (the abstract is not included in section numbering). Also use this numbering for internal cross-referencing; do not just refer to 'the text'. Any subsection may be given a brief heading. Each heading should appear on its own separate line.
In the Introduction, state the objectives of the work, and provide an adequate background, avoiding a detailed literature survey or a summary of the results.
Results should be clear and concise. The Discussion should explore the significance of the results of the work, not repeat them. A combined Results and Discussion section is often appropriate. Avoid extensive citations and discussion of published literature.
A short Conclusions section is to be presented. Place Acknowledgements, including information on grants received, before the references in a separate section, and not as a footnote on the title page.
Figure captions, tables, figures and schemes should be presented in this order at the end of the article. They are described in more detail below.
Footnotes
Footnotes should be used sparingly. Number them consecutively throughout the article, using superscript Arabic numbers. Many word processors build footnotes into the text, and this feature may be used. Should this not be the case, indicate the position of footnotes in the text and present the footnotes themselves on a separate sheet at the end of the article. Do not include footnotes in the Reference list. Indicate each table footnote in a table with a superscript lowercase letter.
Tables
Number tables consecutively in accordance with their appearance in the text. Place footnotes to tables below the table body and indicate them with superscript lowercase letters. Avoid vertical rules. Be sparing in the use of tables and ensure that the data presented in tables do not duplicate results described elsewhere in the article.
Units
In general, metric units should be used, preferably the Système International (S.I.). If other units are used (fathoms, F, etc), the metric equivalents may be given either in parentheses ( ) or by presenting the dimensionally correct conversion factors as a footnote.
References
References to the published literature should be quoted in the text as follows:
Smith (1950), the date of publication, in parentheses, following the author's name.
When there is more than one author, all are to be cited. References should be listed together at the end of each paper and not given as a footnote. They should be arranged in alphabetical order (first author's surname) to appear as follows:
Bertine, K.K. and K.K. Turekian (1973) Molybdenum in marine deposits. Geochimica et Cosmochimica Acta, 37, pp.1415-1434.
Richards, F.A. (1965) Dissolved gases other than carbon dioxide. In: Chemical Oceanography, J.P. Riley and G. Skirrow, editors, Academic Press, 1, pp. 197-225.
Riley, J.P. and G. Skirrow, editors (1965) Chemical Oceanography, Academic Press, 1, 712 pp.
Sverdrup, H.U., M.W. Johnson and R.H. Fleming (1942) The Oceans: their Physics, Chemistry and General Biology, Prentice-Hall, 1087 pp.
It is particularly requested that (a) author's initials, (b) title of the paper, and  the volume, possibly part numbers and pagination (first and last pages inclusive) be given. Titles of journals in the Russian language should be transliterated and not translated.
References to Electronic Material
The following provide examples of appropriate citation formats for non-text and electronic-only information. However, it is requested that a Web site address, or listserver message is given as a reference only where the information is unavailable in a more permanent form. If such sources are given, then please give as complete information as possible.
Jones, P. (1996) jones@sti.com Research activities at Smith Technology Institute.
Smith, F. and Peabody, A.N. (1997) Hydrographic data for the Sargasso Sea, July-September 1993, SarSea ission. (Deep-Sea Data Centre, Hull, UK), online, dataset, 740 MB.
Green, A. (1991) Deformations in Acanthaster planci from the Coral Sea, observed during UEA Special Project 7, July 1978. Journal of Pollution Research, 14(7) suppl, CD-ROM, photographic images, 240 MB.
James, Z. (1997) g.smith@uea.ac.uk Ecological effects of sea wall construction during 1994 at Bridlington, UK. Listserver Message, Eco-list eco@glm.gov, 20 October 1995.
Supplementary electronic material - Multi Media Components
Authors are encouraged to submit additional information in support of their article. This might include sample data files, software or animations. Where the article refers to data files held on an external server, a URL should be given where possible to allow linkage. Supplementary material should be submitted via Elsevier Editorial System. Where this is not possible, contact the Editor for further instructions. Details on file types can be found on the Author Gateway 'Artwork' pages at http://authors.elsevier.com/artwork.
Use of the Digital Object Identifier
The digital object identifier (DOI) may be used to cite and link to electronic documents. The DOI consists of a unique alpha-numeric character string which is assigned to a document by the publisher upon the initial electronic publication. The assigned DOI never changes. Therefore, it is an ideal medium for citing a document, particularly ?Articles in press? because they have not yet received their full bibliographic information. The correct format for citing a DOI is shown as follows (example taken from a document in the journal Physics Letters B):
doi:10.1016/j.physletb.2003.10.071
When you use the DOI to create URL hyperlinks to documents on the web, they are guaranteed never to change.
Preparation of Illustrations
Submitting your final artwork in an electronic format helps us to produce your work to the best possible standards, ensuring accuracy, clarity and a high level of detail.
General points
Make sure you use uniform lettering and sizing of your original artwork.
Save text in illustrations as "graphics" or enclose the font.
Only use the following fonts in your illustrations: Arial, Courier, Helvetica, Times, Symbol.
Number the illustrations according to their sequence in the text.
Use a logical naming convention for your artwork files, and supply a separate listing of the files and the software used.
Provide captions to illustrations separately.
Produce images near to the desired size of the printed version.
A detailed guide on electronic artwork is available on our website: http://authors.elsevier.com/artwork
You are urged to visit this site; some excerpts from the detailed information are given here.
Formats
Regardless of the application used, when your electronic artwork is finalised, please "save as" or convert the images to one of the following formats (Note the resolution requirements for line drawings, halftones, and line/halftone combinations given below.):
EPS: Vector drawings. Embed the font or save the text as "graphics".
TIFF: Colour or greyscale photographs (halftones): always use a minimum of 300 dpi.
TIFF: Bitmapped line drawings: use a minimum of 1000 dpi.
TIFF: Combinations bitmapped line/half-tone (colour or greyscale): a minimum of 500 dpi is required.
DOC, XLS or PPT: If your electronic artwork is created in any of these Microsoft Office applications please supply "as is".
Please do not:
Supply embedded graphics in your wordprocessor (spreadsheet, presentation) document when submitting the final accepted article;
Supply files that are optimised for screen use (like GIF, BMP, PICT, WPG); the resolution is too low;
Supply files that are too low in resolution;
Submit graphics that are disproportionately large for the content.
Colour illustrations If, together with your accepted article, you submit usable colour figures then Elsevier will ensure, at no additional charge, that these figures will appear in colour on the web (e.g., ScienceDirect and other sites) regardless of whether or not these illustrations are reproduced in colour in the printed version. For colour reproduction in print, you will receive information regarding the costs from Elsevier after receipt of your accepted article. For further information on the preparation of electronic artwork, please see http://authors.elsevier.com/artwork. Please note: Because of technical complications which can arise by converting colour figures to 'grey scale' (for the printed version should you not opt for colour in print) please submit in addition usable black and white files corresponding to all the colour illustrations.
Page Proofs
When your manuscript is received by the Publisher it is considered to be in its final form. Proofs are not to be regarded as 'drafts'.
One set of page proofs in PDF format will be sent by e-mail to the corresponding author, to be checked for typesetting/editing. No changes in, or additions to, the accepted (and subsequently edited) manuscript will be allowed at this stage. Proofreading is solely your responsibility.
A form with queries from the Copyeditor may accompany your proofs. Please answer all queries and make any corrections or additions required.
The Publisher reserves the right to proceed with publication if corrections are not communicated.
Return corrections within 3 days of receipt of the proofs. Should there be no corrections, please confirm this.
Elsevier will do everything possible to get your article corrected and published as quickly and accurately as possible. In order to do this we need your help. When you receive the (PDF) proof of your article for correction, it is important to ensure that all of your corrections are sent back to us in one communication. Subsequent corrections will not be possible, so please ensure your first sending is complete. Note that this does not mean you have any less time to make your corrections, just that only one set of corrections will be accepted.
Offprints
Twenty five offprints of each article are supplied free of charge. Additional offprints can be ordered on a offprint order form which will be sent to the corresponding author of the accepted article by the publisher.
Author Services
For queries relating to the general submission of articles (including electronic text and artwork) and the status of accepted manuscripts, please visit the Author Gateway from Elsevier at http://authors.elsevier.com. The Author Gateway also provides the facility to track accepted articles and set up e-mail alerts to inform you of when and article's status has changed, as well as detailed artwork guidelines, copyright information, frequently asked questions and more.
Contact details for questions arising after acceptance of an article, especially those relating to proofs, are provided after registration of an article for publication.
Publishing Contact:
Kristien van Lunen
Elsevier BV
Radarweg 29
1043 NX
Amsterdam
The Netherlands
Tel: (+31) (0) 20 485 3340
Fax: (+31) (0) 20 485 2696
E-mail: c.lunen@elsevier.com
Editorial Board
Editor-in-Chief:
Peter Killworth, James Rennell Division, National Oceanography Centre, Southampton, Empress Dock, Southampton SO14 3ZH, UK. Phone:+44 (0) 23-8059-6202 Fax: +44 (0) 23-8059-6204 Email: omod@noc.soton.ac.uk; http://www.noc.soton.ac.uk/JRD/PROC/people/pki/
Assistant Editor:
J. Blundell, James Rennell Division, National Oceanography Centre, Southampton, Empress Dock, Southampton SO14 3ZH, UK
Fax: +44 (0) 23-8059-6204
Email:Jeffrey.R.Blundell@noc.soton.ac.uk
Editorial Board:
C. Böening, Universitat at Kiel, Germany
E. Carmack, Institute of Ocean Sciences, Sidney, B.C., Canada
M.K. Davey, University College London, UK
E. Deleersnijder, Universite Catholique de Louvain, Louvain-la-Neuve, Belgium
W.K. Dewar, Florida State University, Tallahassee, FL, USA
A. Gnanadesikan, Princeton University, NJ, USA
R. Hughes, The University of Melbourne, Parkville, Victoria, Australia
P. Lemke, Alfred Wegener-Institut fur Polar- und Meeresforschung, Bremerhaven, Germany
A. Oschlies, Southampton Oceanography Centre, UK
N. Paldor, The Hebrew University of Jerusalem, Israel
W. Perrie, Bedford Institute of Oceanography, Dartmouth, Nova Scotia, Canada
J. Ribbe, University of Southern Queensland, Queensland, Australia
E. Stanev, University of Oldenburg, Germany
A.M. Treguier, Laboratoire de Physique des Oceans, Plouzane, France
J.A. Whitehead, Woods Hole Oceanographic Institution, MA, USA
|
刊名字顺( Alphabetical List of Journals):
返回页首 