期刊名称：WASTE MANAGEMENT
 期刊简介(About the journal)
投稿须知(Instructions to Authors)
编辑部信息(Editorial Board)
About the journal
Waste Management is an international journal devoted to the presentation and discussion of information on the generation, prevention, characterization, monitoring, treatment, handling, reuse and ultimate residual disposition of solid wastes, both in industrialized and in economically developing countries. The journal addresses various types of solid wastes including municipal (e.g., residential, institutional, commercial, light industrial), agricultural, and special (e.g., C and D, health care, household hazardous wastes, sewage sludge).
Waste Management is designed for scientists, engineers, and managers, regardless of their discipline, who are involved in scientific, technical and other issues related to solid waste management. Emphasis is placed on integrated approaches. These approaches require the blending of technical and non-technical factors. Although the dissemination and application of innovative technical information is extremely important, the implementation of sustainable waste management practices also requires a thorough understanding of the pertinent legal, social, economic, and regulatory issues involved.
The journal strives to present a mix of subject matter that will best serve to help the reader understand the breadth of issues related to solid waste management. The following are some of the major areas in which papers are solicited:
Instructions to Authors
Submission of Papers
Authors are requested to submit their original manuscript and figures to:
Waste Management Editorial Office, 2454 Stanwell Drive, Concord, CA 94520, USA; Tel: +1 925 356 3700; Fax: +1 925 356 7956 E-mail: ludiaz@calrecovery.com.
Submission of a paper implies that it has not been published previously, that it is not under consideration for publication elsewhere and that if accepted it will not be published elsewhere in the same form, in English or in any other language, without the written consent of the publisher.
The submission should include an original, three copies and an electronic copy of the manuscript (including text, tables and figures). The electronic copy should be submitted on a 1.44 MB diskette containing the manuscript, with separate files for the text, tables and figures. The diskette should be labeled with the Journal name, corresponding author, title of the paper, name of the files and manuscript number (if available). Authors should submit an electronic copy of their paper with each version of the manuscript. The electronic copy should match the hardcopy exactly.
Review Process:
All manuscripts will be peer reviewed. Authors are asked to submit full contact details for three potential reviewers. The Editor will typically utilize one or two of these referees and one or two other independent referees during the review process.
Preparation of Manuscripts
Language Manuscripts should be in English. Authors whose native language is not English are urged to seek advice from, or have their manuscript proofread by, a native English speaker.
General Format: Manuscripts must be typewritten with a font size of 12 or 10 pt, double-spaced with wide margins on one side of white paper, and numbered consecutively. The manuscript should contain the following in this order: Title Page, Abstract and Keywords, Text, Acknowledgements (optional), Appendix (optional), References, Tables, and Figures. Do not import the Tables or Figures into the text. Authors should consult a recent issue of the journal for style if possible. The Editors reserve the right to adjust style to certain standards of uniformity.
Title PageThe title page should be devoted to the title (in caps), the initials and name(s) of the author(s), and the full postal addresses for all co-authors. The desired maximum length of the title is 10 words. The corresponding author should be identified with an asterisk, and a footnote should contain an e-mail address, telephone number and fax number for the corresponding author.
AbstractThe second page should consist of an abstract of 100-200 words that summarizes the major findings, and 4-6 keywords.
TextThe text should start on the third page. The text should start on the third page. It should clearly convey the purpose of the study, the approach, and the key findings. A conclusion should be included that indicates the significant contribution of the manuscript with its applications. Footnotes should be identified with superscript Arabic numbers. In the text refer to the author's name (without initials) and year of publication (e.g. "Since Peterson (1993) has shown that?" or "This is the agreement with results obtained later (Kramer, 1994)".
References:References should start on a separate page. All publications cited in the text should be presented in a list of references following the text of the manuscript. The list of references should be arranged alphabetically by authors' names.
References should be given in the following form:
NIOSH, 1994. Pocket guide to chemical hazards. US Dept of health and human services. US Government Printing Office, Washington DC.
Yaws C.L., 1994. Handbook of vapor pressure, vols 1-3. Gulf, Houston TX.
Schroder H.F., 1999. Substance-specific detection and pursuit of non-eliminable compounds during biological treatment of waste water from the pharmaceutical industry. Waste Management 19(2), 111-123.
Godbee H.W., 1973. Use of evaporation for treatment of liquids in nuclear industry. ORNL-4790. Oak Ridge National Laboratory, Oak Ridge, TN.
Tables:Tables should be placed after the references, with each table placed on a separate page, numbered consecutively in the order to which they are referred and given a suitable caption. Footnotes to tables should be typed below the table and should be referred to by superscript lowercase letters. No vertical rules should be used. Tables should not duplicate results presented elsewhere in the manuscript, (e.g. in graphs).
Figures:Figures should be placed after the tables, numbered consecutively in the order to which they are referred, and given a descriptive caption. Photographs, charts and diagrams are all to be referred to as "Figure(s)." Figures that are not submitted electronically should be provided in camera-ready form. Line drawings: All line drawings must have black print, with no shading on computer-generated figures. Lettering, graph lines and points on graphs should be sufficiently large and bold to permit reproduction when the diagram has been reduced to a size suitable for inclusion in the journal. Photographs:Original photographs must be supplied as they are to be reproduced (e.g. black and white or colour). If necessary, a scale should be marked on the photograph.
Colour:Submit colour illustrations as original photographs, high-quality computer prints or transparencies, close to the size expected in publication, or as 35 mm slides. Polaroid colour prints are not suitable. If, together with your accepted article, you submit usable colour figures then Elsevier will ensure, at no additional charge, that these figures will appear in colour on the web (e.g., ScienceDirect and other sites) regardless of whether or not these illustrations are reproduced in colour in the printed version. For colour reproduction in print, you will receive information regarding the costs from Elsevier after receipt of your accepted article. For further information on the preparation of electronic artwork, please see http://authors.elsevier.com/artwork.
Please note: Because of technical complications which can arise by converting colour figures to ?grey scale? (for the printed version should you not opt for colour in print) please submit in addition usable black and white prints corresponding to all the colour illustrations.
Units:Authors are to use SI (metric) units and international quantities and abreviations. Equivalent values in other systems may be used provided their metric equivalents are included in every case.
Submission of Other Materials:
Discussions:Discussions may be submitted on any paper published in Waste Management. Discussions are accepted for a period of 6 weeks following the date of publication. The discussion should include only matter pertinent to the subject and is restricted to five double-spaced manuscript pages, including tables and figures. All discussions should be written in the third person. Discussions have a specific format. The title of the original paper/technical note appears at the top of the first page with a superscript letter "a" that corresponds to a footnote indicating the volume, issue number, author(s), and page numbers of the original paper/technical note. The discusser's full name, title, affiliation, and address should be indicated below the title. The discusser's figures, tables, and references follow consecutively from the original paper/technical note. In referring to a figure, table, or reference that appeared in the original, use the same number used in the original.
Closures:When a discussion is received and approved for publication, the author of the paper/technical note will prepare a closure - a response that provides clarifications of and conclusions to the points raised in the discussions. Authors have 1 month from the date of their receipt of a discussion to prepare a closure. Closures are published in the same issue as the discussions. In the preparation of closures, authors should follow the format outlined above for discussions, including the title of the original contribution and the author information. Numbers for figures, tables, and references follow consecutively from the discussion.
Book Reviews:Book reviews should start with the title of the book, other information shown in the reference section and the price of the book. The reviewer's name should appear as a signature along with the reviewer's affiliation and full postal address.
Additional Information
Review ProcessAll manuscripts are sent to at least two independent referees to ensure both accuracy and relevance to the journal. The final decision regarding acceptance will be made by the Editors. Manuscripts may be sent back to authors for revision if necessary. Revised manuscript submissions should be made as soon as possible (within 6 weeks) after the receipt of the referees' comments. Authors should retain a copy of their manuscript since we cannot accept responsibility for damage or loss of papers. Original manuscripts are discarded one month after publication unless the Publisher is asked to return original material after use.
Proofs:Proofs will be sent to the author (first named author if no corresponding author is identified of multi-authored papers) and should be returned within 48 hours of receipt. Corrections should be restricted to typesetting errors; any others may be charged to the author. Any queries should be answered in full. Please note that authors are urged to check their proofs carefully before return, since the inclusion of late corrections cannot be guaranteed. Proofs are to be returned to the Log-in Department, Elsevier Science, Stover Court, Bampfylde Street, Exeter, Devon EX1 2AH, UK.
Off-PrintsTwenty-five offprints will be supplied free of charge. Additional offprints and copies of the issue can be ordered at a specially reduced rate using the order form sent to the corresponding author after the manuscript has been accepted. Orders for reprints (produced after publication of an article) will incur a 50% surcharge.
CopyrightAll authors must sign the "Transfer of Copyright" agreement before the article can be published. This transfer agreement enables Elsevier Science Ltd to protect the copyrighted material for the authors, without the author relinquishing his/her proprietary rights. The copyright transfer covers the exclusive rights to reproduce and distribute the article, including reprints, photographic reproductions, microfilm or any other reproductions of a similar nature, and translations. It also includes the right to adapt the article for use in conjunction with computer systems and programs, including reproduction or publication in machine-readable form and incorporation in retrieval systems. Authors are responsible for obtaining from the copyright holder permission to reproduce any material for which copyright already exists.
Author ServicesFor queries relating to the general submission of manuscripts (including electronic text and artwork) and the status of accepted manuscripts, please contact Author Support, Elsevier Science Ireland Ltd, Elsevier House, Brookvale Plaza, East Park, Shannon, Co. Clare, Ireland. E-mail: authorsupport@elsevier.ie. Authors can also keep a track on the progress of their accepted article, and set up e-mail alerts informing them of changes to their manuscript's status, by using the "Track a Paper" feature of Elsevier's Author Gateway, located at http://authors.elsevier.com.
Editorial Board
Editor-in-Chief:
L.F. Diaz, CalRecovery Inc., 2454 Stanwell Drive, Concord CA 94520, USA Email: ludiaz@calrecovery.com
Managing Editor:
L.L. Eggerth, CalRecovery Inc., 2454 Stanwell Drive, Concord, California 94520, USA Email: wm@calrecovery.com
Associate Editors:
M. Barlaz, North Carolina State University, Box 7908, Mann Hall, Raleigh, 27695-7908, North Carolina, USA Email: barlaz@eos.ncsu.edu
Chi S. Poon, The Hong Kong Polytechnic University, Hung Hom, Hong Kong Email: cecspoon@polyu.edu.hk
A. Fourie, University of Witwatersrand, Johannesburg, South Africa Email: AndyF@civil1.civil.wits.ac.za
M. Milke, University of Canterbury, Private Bag 4800, Christchurch, New Zealand Email: mark.milke@canterbury.ac.nz
H.A. van der Sloot, Netherlands Energy Research Foundation (ECN), P.O. Box 1, 1755 Zg Petten, The Netherlands Email: vandersloot@ecn.nl
IWWG Editorial Strategy Group
T. Christensen, Technical University of Denmark, Denmark
R. Cossu, University of Padova, Italy
L. Diaz, CalRecovery Inc., Concord USA
A. Lagerkvist, Lule?University of Technology, Sweden
P. Lechner, BOKU, Austria
Y. Matsufuji, Fukuoka University, Japan
H. Robinson, ENVIROS, UK
R. Stegmann, Technical University of Hamburg, Germany
Editorial Board:
J.M. Baldasano, Universitat Politecnica de Catalunya, Barcelona, Spain
W. Bidlingmaier, Bauhaus-University Weimar, Weimar, Germany
B. Bilitewski, Institut fur Abfallwirtschaft und Atlasten, Pirna, Germany
J.E. Bogner, Landfills Inc., Wheaton, IL, USA
O. Cermak, Slovak University of Technology, Bratislava, Slovakia
C. Cheeseman, Imperial College, London, UK
M. de Bertoldi, Udine University, Italy
J.J.J.M. Goumans, ISCOWA, The Netherlands
P.J Gourc, Universite Joseph Fourier, Grenoble 1, LIRIGM - Geologie et Mecanique, France
P. Grathwohl, University of Tubingen Geological Institute, Germany
S. Hancock, URS Australia Pty Ltd, Richmond, Australia
G. Ho, Murdoch University, Australia
D.S. Kosson, Vanderbilt University, Nashville, TN, USA
J.J. Lee, Chonnam National University, Korea
C. Martinez Orgado, Club Espanol de Residuos, Madrid, Spain
T. Matsuto, Hokkaido University, Japan
M. Pelino, University Degli Studi Dell'Aquila, Monteluco di Roio, Italy
D.R. Reinhart, University of Central Florida, USA
T.L. Richard, Iowa State University, USA
R.K. Rowe, Queen's University, Ontario, Canada
K. Sakurai, University of Okinawa, Japan
S. Salhofer, Universitaet fuer Bodenkultur Wien, Vienna, Austria
G.M. Savage, CalRecovery, Inc., USA
A. Savino, CEAMSE, Argentina
A.V Shekdar, National Environmental Engineering Research Institute, Nagpur, India
E.I. Stentiford, University of Leeds, UK
G. Vogel, Vienna University of Economics and Business Administration, Vienna, Austria
E. Worrell, Lawrence Berkeley National Laboratory, Berkeley, CA, USA
|
刊名字顺( Alphabetical List of Journals):
返回页首 