期刊名称：STEEL AND COMPOSITE STRUCTURES
 期刊简介(About the journal)
投稿须知(Instructions to Authors)
编辑部信息(Editorial Board)
About the journal
Steel & Composite Structures, An International Journal, provides and excellent publication channel which reports the up-to-date research developments in the steel and steel-concrete composite structures from the international steel engineering community. The research results reported in this journal address all aspects of theoretical and experimental research, including bucking / stability, fatigue / fracture, fire performance, connections, frames / bridges, plates / shells, composite structural components, hybrid structures, fabrication / maintenance, design code, dynamic / vibration, nonferrous metal structures, and analytical methods. The journal specially wishes to bridge gap between the theoretical developments and the practical applications for the benefits of both academic researchers and practing engineers. In this light, contributions from the practicing engineering are especially welcome.
Instructions to Authors
|
1. Submission of the paper
Authors are encouraged to submit manuscripts on diskettes as well as a hard copy (partial manuscript on diskettes will also be acceptable). Manuscripts should be submitted in triplicate to one of editors-in-chief listed in each journal.
|
2. Preparation of the manuscript
General : The manuscripts should be in English and typed with double line spacing on single side of A4 paper. The first page of an article should contain; (1) a short title(reflecting the content of the paper), (2) all the name(s) and address(es) of author(s), (3) name and address of the author to whom correspondence and proofs should be sent, and (4) and abstract of 100-200 words. The paper should be concluded by proper conclusions which reflect the findings in the paper. The length of paper should not exceed 16 journal pages (approx. 9000-words equivalent). There will be no page charges if the length of paper is within the limit. A separate list of key words should be provided at the end of the manuscript.
Tables and figures : Tables and figures should be consecutively numbered and captioned with short titles. They should be referred to in the text as Fig. 1, Table 2, etc. Originally drawn figures and glossy prints of photographs should be provided in a form suitable for photographic reproduction and reduction in the journal. A separate list of captions for illustrations should be provided at the end of the manuscript.
Units and mathematical expressions : It is desirable that units of measurements and abbreviations should follow the Systeme Internationale (SI). The numbers identifying the displayed mathematical expression should be placed in parentheses and referred to in the text as Eq. (1), Eq. (2).
References : References to published literature should be referred in the text by the last name(s) of author(s) and the year of publication of the reference(e.g., Choi and Schnobrich 1975) and listed in the alphabetical order of the last name of the first author in an appendix at the end of the paper. Journal titles should be abbreviated in the style of the Word List of Scientific Periodicals. References should be cited in the following style.
|
Journal : |
Choi, C.K. and Kim, S.H. (1989), "Coupled use of reduced integration and nonconforming modes in improving quadratic plate element", Int. J. Num. Meth. Eng., 28(4), 1909-1928. |
|
Book : |
Salvadori, M.G. and Baron, M.L. (1961), Numerical Methods in Engineering, Prentice-Hall, Englewood Cliffs, NJ. |
|
Proceedings : |
Choi, C.K. and Kwak, H.G. (1989). "Optimum RC member design with discrete sections", Proceedings of '89 ASCE Structures Congress, San Francisco, May. |
3. Proofs
Proofs will be sent to the corresponding author to correct any typesetting errors. Alterations to the original manuscript at this stage will not be accepted. Proofs should be returned within 48 hours of receipt by Express Mail.
4. Copyright
Submission of an article to OUR JOURNALS implies that it presents the original and unpublished work, and not under consideration for publication elsewhere. On acceptance of a manuscript submitted, the copyright thereof is transferred to the publishers by Transfer of Copyright Agreement. |
|
Editorial Board
|
Editors-in-chief |
|
Chang-Koon Choi (Managing Editor) |
|
|
Department of Civil Engineering
Korea Advanced Institute of Science & Technology
Taejun 305-701, Korea
e-mail :cck@kaist.ac.kr |
|
David A. Nethercot(European Editor) |
|
|
Dept. of Civil & Envirmental Engineering
Imperial College of Science Technology and Medicine
London, SW7 2BU
U.K.
e-mail: d.nethercot@ic.ac.uk |
|
Siu-Lai Chan (Asian-Pacific Editor) |
|
|
Dept. of Civil & Structural Engineering
Hong Kong Polytechnic University
Hung Hom, Kowloon,
Hong Kong
e-mail: ceschan@polyu.edu.hk |
|
Chia-Ming Uang(North American Editor) |
|
|
Dept. of Structural Engineering
University of California, San Diego
La Jolla, CA 92093
U.S.A.
e-mail: cmu@ucsd.edu |
|
|
|
International Editorial Board |
|
Prof. D. Anderson |
Prof. J.M. Aribert |
|
|
University of Warwick
Coventry, CV4 7AL, U.K. |
|
INSA Rennes
35043 Rennes Cedex, France |
|
Prof. F.S.K. Bijlaard |
Prof. M. Bradford |
|
|
Delft Univ. of Technology
2628 CN, Delft, The Netherlands |
|
Univ. of New South Wales
Sydney, NSW 2052, Australia |
|
Prof. Russell Bridge |
Prof. W. F. Chen |
|
|
Univ. of Western Sydney
NSW 2747, Australia |
|
University of Hawaii
Honolulu, HI96822, U.S.A. |
|
Prof. Greg. G. Deierlain |
Prof. D. Dubina |
|
|
Stanford University
Stanford, CA 94305-4020, U.S.A. |
|
Polyt. Univ. of Timisoara
Timisoara, Romania |
|
Prof. W. Samuel Easterling |
Prof. Micheal D. Engelhardt |
|
|
VPI & State Univ.
Blacksburg, VA 24060, U.S.A. |
|
University of Texas
Austin, TX 78712, U.S.A. |
|
Prof. R. Greiner |
Prof. G. Hancock |
|
|
Technical Univ. of Graz
A-8010 Graz, Austria |
|
University of Sydney
Sydney, NWS 2006, Australia |
|
Prof. Miklos Ivanyi |
Prof. S. Kato |
|
|
Tech. Univ. of Budapest
Budapest, Hungary |
|
Toyohashi Univ. of Tech
Toyohashi 441, Japan |
|
Prof. Robert T. Leon |
Prof. G.Q. Li |
|
|
Georgia Inst. of Technology
Atlanta, GA 30332-0355, U.S.A. |
|
Tongji University
Shanghai 200092, P.R.China |
|
Prof. R. Liew |
Prof. Le-Wu Lu |
|
|
Nat'l Univ. of Singapore
Singapore 0511, Singapore |
|
Lehigh University
Bethlehem, PA 18015, U.S.A. |
|
Prof. P. Makelainen |
Prof. Chitoshi Miki |
|
|
Helsinki University of Tech.
FIN-02015 HUT, Finland |
|
Tokyo Inst. of Tech.
Tokyo 152, Japan |
|
Prof. Deric J. Oehlers |
Prof. D. Redekop |
|
|
Univ. of Adelaide
SA 2005, Australia |
|
University of Ottawa
Ottawa, K1N 6N5, Canada |
|
Prof. K. Takanashi |
Prof. Keh-Chyuan Tsai |
|
|
Chiba University
Chiba, 263-8522, Japan |
|
Nat'l Taiwan Univ.
Taipei, 10617 Taiwan |
|
Prof. J.G. Teng |
Prof. Robert Tremblay |
|
|
Hong Kong Polytech. Univ.
Kowloon, Hong Kong |
|
Ecole Polytech. Montreal
Quebec H3C 3A7, Canada |
|
Prof. T. Usami |
Prof. Ricardo Zandonini |
|
|
Nagoya University
Nagoya 464-01, Japan |
|
Univ. of Trento
38050 Trento, Italy |
|
|
刊名字顺( Alphabetical List of Journals):
返回页首 