期刊名称：ORE GEOLOGY REVIEWS
 期刊简介(About the journal)
投稿须知(Instructions to Authors)
编辑部信息(Editorial Board)
About the journal
Ore Geology Reviews
Ore Geology Reviews aims to familiarize all earth scientists with recent advances in a number of interconnected disciplines related to the study of, and search for, ore deposits. The reviews range from brief to longer contributions, but the journal preferentially publishes manuscripts that fill the niche between the commonly shorter journal articles and the comprehensive book coverages, and thus has a special appeal to many authors and readers.
Ore Geology Reviews covers topics related to ``ore geology' in its broadest sense. The following exemplifies the range of subject matter that can be described and discussed in the journal:
metalliferous and non-metalliferous (industrial mineral) ore geology of all types; land-based and oceanic studies; economic geology per se; pollution studies related to exploration and mining; ore and gangue mineralogy, petrography, petrology, petrogenesis; host-rock studies; metallogeny and minerogenesis (e.g. metallotectonics); specific deposits, districts, and belts; local to regional, detailed to general or reconnaissance studies, on any scale; pure and applied studies, i.e. theoretical and practical data; methodology of any kind: laboratory-based and field-oriented; geological (including stratigraphic, structural, remote-sensing); mathematical (e.g. computer geology); geochemical, geophysical and philosophical; research and exploration techniques.
|
Abstracting / Indexing
- Current Contents
- ESRISAT
- Engineering Index
- GEOBASE
- Index to Scientific Reviews
- Mineralogical Abstracts
- Petroleum Abstracts
- Research Alert
-
SCISEARCH |
 |
Instructions to Authors
General instructions
1. Papers must be submitted in their final form, bearing in mind that no further correction/addition is possible.
2. Submission of an article is understood to imply that the article is original and unpublished and is not being considered for publication elsewhere.
3. Manuscripts should be structured in a way that conforms to that of the journal in question.
4. A recent issue should be checked for information about
- number of copies required.
- address to which manuscript should be sent.
- whether keywords, autobiographies, etc., are required.
5. Manuscripts must be written in English*. Authors whose native language is not English are recommended to seek the advice of a colleague who has English as his mother-tongue before submitting their manuscript. Manuscripts written in correct English require less time for review and publication.
*Occasional contributions in French will be considered for publication for the following journals: ISPRS Journal of Photogrammetry & Remote Sensing and Review of Palaeobotany and Palynology.
Authors in Japan please note: Upon request, Elsevier Science Japan will provide authors with a list of people who can check and improve the English of their paper (before submission). Please contact our Tokyo office: Elsevier Science Japan, 1-9-15 Higashi Azabu, Minato-ku, Tokyo 106. Tel: +81 3 5561 5032. Fax: +81 3 5561 5045.
6. Authors should use IUGS terminology. The use of S.I. units is also strongly recommended.
7. The manuscript should be prepared on a word processor and printed with double spacing and wide margins. The various headings should be clearly differentiated, and first and second order headings should be numbered.
8. The entire manuscript should be paginated. However, in the text no reference should be made to page numbers; if necessary, you may refer to section numbers.
9. Manuscripts should generally be organized in the following order:
a. Title
b. Name(s) of the author(s) and their affiliations and fax and e-mail numbers. Fax and e-mail numbers should be placed as footnotes. In the case of more than one author please indicate to whom the correspondence should be addressed.
c. Abstract
d. Keywords
e. Introduction
f. Area descriptions, methods and material studied
g. Results and analyses
h. Discussion and conclusions
i. Acknowledgements
j. Appendices
k. References
l. Tables
m. Figure captions
n. Figures
Elsevier Science reserves the right of returning to the author for revision accepted manuscripts and illustrations which are not in the form given in this guide.
Keywords
1. Except for the journals Coastal Engineering, Hydrometallurgy and International Journal of Mineral Processing, authors must provide 4 to 6 keywords. These must be taken from the most recent American Geological Institute GeoRef Thesaurus and should be placed beneath the abstract. Coastal Engineering authors should provide free text keywords, Hydrometallurgy authors will be provided with a list of keywords by the editor upon submission of the manuscript and International Journal of Mineral Processing authors should base their keywords on the Thesaurus of the Institute of Mining and Metallurgy
Abstract
1. The abstract should be a concise summary of the paper stating the methods used, the main results and the conclusions in a way that does not require reference to the body of the paper; it should not be longer than 500 words.
2. Articles in French must start with an abstract in English, headed by an English translation of the title. An abstract in the language of the paper must follow the English abstract. English translations of figure captions and table titles must also be supplied.
References
1. All references cited in the text are to be listed at the end of the paper. The manuscript should be carefully checked to ensure that the spellings of authors' names and publication years are exactly the same in the text as in the reference list. Do not type author's and editor's names in capitals.
2. In the text refer to the author's name (without initials) and year of publication, followed - if necessary - by a short reference to appropriate pages. Examples: ``Because Peterson (1994) has shown that...'. ``This is in agreement with results obtained later (Kramer, 1995, pp. 12-16)'.
Please note: For Earth and Planetary Science Letters and Hydrometallurgy the references should be numbered in the order in which they are cited. These are examples of the referencing style in the text: [1,2] [3-7]. References should be listed at the end of the paper in numerical order.
3. If reference ide in the text to publications written by more than two authors the name of the first author should be used, followed by ``et al.'. This indication, however, should never be used in the list of references. In this list names of authors and all co-authors must be given in full.
4. References in the text should be arranged chronologically. The list of references should be arranged alphabetically by authors' names, and chronologically per author. If an author's name in the list is also mentioned with co-authors, the following order should be used: Publications of the single author, arranged according to publication year - publications of the same author with one co-author, arranged according to publication year - publications of the author with more than one co-author, arranged according to publication year.
The following system should be used for arranging references:
Please note: Earth and Planetary Science Letters uses a different system. Please refer to the Guide for Authors for that journal.
a. Journal papers: Names and initials of all authors, year. Title of paper. Journal name (given in full or abbreviated using the International List of Periodical Title Word Abbreviations), volume number (issue number): first and last page numbers of the paper.
Example:
Elbaz-Poulichet, F., Guan, D.M. and Martin, J.M., 1991. Trace metal behaviour in a highly stratified Mediterranean estuary: the Krka (Yugoslavia). Mar. Chem., 32: 211-224.
b. Monographs: Names and initials of all authors, year. Title of the monograph. Publisher, location of publisher.
Example:
Zhdanov, M.S. and Keller, G.V., 1994. The Geoelectrical Methods in Geophysical Exploration. Elsevier, Amsterdam.
c. Edited volume papers: Names and initials of all authors, year. Title of paper. Names and initials of the volume editors, title of the edited volume. Publisher, location of publisher, first and last page numbers of the paper.
Example:
Thomas, E., 1992. Middle Eocene-late Oligocene bathyal benthic foraminifera (Weddell Sea): faunal changes and implications for ocean circulation. In: D.R. Prothero and W.A. Berggren (Editors), Eocene-Oligocene Climatic and Biotic Evolution. Princeton Univ. Press, Princeton, NJ, pp. 245-271.
d. Conference proceedings papers: Names and initials of all authors, year. Title of paper. Name of the conference. Publisher, location of publisher, first and last page numbers of the paper.
Example:
Smith, M.W., 1988. The significance of climatic change for the permafrost environment. Final Proc. Int. Conf. Permafrost. Tapir, Trondheim, Norway, pp. 18-23.
e. Unpublished theses, reports, etc.: Names and initials of all authors, year. Title of item. All other relevant information needed to identify the item (e.g., technical report, Ph.D. thesis, institute, etc.).
Example:
Moustakas, N., 1990. Relationships of morphological and physicochemical properties of Vertisols under Greek climate conditions. Ph.D. Thesis, Agricultural Univ. Athens, Greece.
5. In the case of publications in any language other than English, the original title is to be retained. Titles of publications in non-Latin alphabets should be transliterated, and a note such as `(in Russian)' or `(in Japanese, with English Abstr.)' should be added at the end of the reference.
Illustrations
1. All illustrations must be presented separate from the manuscript, unfolded, and as originals. Each illustration must be sharp and draughted at high density on bright white paper, on glossy paper or on drawing film. Authors are reminded to provide copies of all illustrations with the originals.
2. Photographs and micrographs, etc. must be sharp and exhibit good contrast. Original glossy prints (e.g., from negatives) are required. Reproductions of photographs, etc. cannot be accepted. The object being shown must fill the image.
3. All illustrations must be numbered consecutively and referred to in the text.
4. Each illustration should be identified on the reverse side (or - in the case of line-drawings - on the lower front side) by its number and the name of the principle author. Indicate the top of the illustration in cases where doubt may arise.
5. Illustrations must designed with the page format of the journal in mind. If necessary, they will be reduced to the proper format by the publisher. The lettering and other details must have dimensions that do not become illegible or unclear after the required reduction. Foldouts can only be accepted in exceptional cases. Design all figures in a way that uses all the available space, do not leave large areas blank. Remember that sharp, neat, well presented illustrations will be essential to the readers' appreciation of your paper.
6. Lettering must be drafted sharply and neatly. The lettering must be in the language of the manuscript. The same type of letteshould be used throughout.
7. Bar scales must be used rather than magnification factors that must be changed in cases of reduction. Do not forget to mention the units used in diagrams.
8. All maps must have north and latitude and longitude indicated.
9. Each illustration must have a caption. All figure captions should be typed on a separate sheet and be double spaced.
10. Explanations must be given in the typewritten caption. Text in the figures should be kept to a minimum.
11. Laser-printed illustrations are acceptable. In such cases please also provide a disc copy.
12. Colour figures can be accepted provided the author is prepared to meet the reproduction costs. Please consult the publisher for further information.
Tables
1. Authors should take note of the limitations set by the size and layout of the journal. A table should not exceed the printed area of the page. If this appears impossible, reversing columns and rows will often make the impossible possible.
2. Large tables should be avoided. Foldouts can only be accepted in exceptional cases. If many data are to be presented, an attempt should be made to divide these over two or more tables.
3. Tables should be compiled on separate sheets and must be numbered according to their sequence in the text. The text must include references to all tables.
4. Each table must have a brief and self-explanatory title. Column headings should be brief, but sufficiently explanatory. Units of measurement should be given in parentheses. Vertical lines must not be used to separate columns - leave extra space between the columns instead.
5. Explanations that are necessary to the understanding of the table should be given as footnotes at the bottom of the table. A footnote should be indicated by a lower-case letter.
Formulae
1. All formulae should be presented consistently and clearly with regard to the meaning of each symbol and its correct location. Formulae must be typed throughout.
2. All unusual symbols must be collected in a separate list in the appendix, giving a clear explanation of each symbol.
3. Please try to keep the notation as simple as possible, and avoid ambiguities. Do not use special typefonts if there is no urgent need to do so.
4. Different formulae should be clearly separated in the manuscript, at least by punctuation marks, if not by words. Avoid breaking formulae if breaking is not strictly necessary (i.e., if the equation is less than one typed line). Never let a sentence consist of formulae alone (i.e., without any connection with the preceding text).
5. Do not use complicated juxtapositions of symbols. Also, try to avoid complicated subscripts and superscripts; third-order indices especially present difficulties as to their size and position, and fourth-order indices are taboo.
6. The manuscript must show a clear distinction between similar symbols, (e.g., between zero (0) and the letter O, between one (1) and the letter l, and between multiplication ( ) and the letter x).
7. Important formulae (e.g. definitions) must be displayed. All formulae which are to be referred to later on must be displayed and numbered consecutively throughout the paper; the number should appear on the right-hand side of the page.
8. In chemical formulae the valence of ions must be given as, for example, Ca2+ and CO32 rather than as Ca++ and CO3--.
9. Isotope numbers should precede the symbols (e.g., 18O).
Footnotes
1. Footnotes should only be used if absolutely essential. In most cases it will be possible to incorporate them in the main text.
2. If used, footnotes should be numbered consecutively throughout the manuscript, indicated by superscript arabic numbers, and kept as short as possible.
Page proofs
1. One set of page proofs will be sent to the corresponding author to be checked for typesetting/editing. The author is not expected to make changes or corrections that constitute departures from the article that was accepted by the editor. Proofs should be returned within 3 days.
Copyright
1. Upon acceptance of an article by the journal, the author(s) will be asked to transfer the copyright of the article to the publisher. This transfer will ensure the widest possible dissemination of information.
2. The author is responsible for obtaining permission to use any copyrighted material:
a. When quoting from someone else's work or when considering reproducing an illustration or table from a book or journal article, the author should ensure that he is not infringing copyright.
b. Although in general an author may quote from other published works, he should obtain permission from the copyright holder if he wishes to use substantial excerpts or to reproduce tables, plates, or other illustrations. If the copyright hois not the author of the quoted or reproduced material, it is recommended that the permission of the author in question is also sought.
c. Material in unpublished letters and manuscripts is also protected and must not be published unless permission has been obtained.
d. A suitable acknowledgement of any borrowed material must always be made.
3. Company clearance, if applicable, should be acquired prior to submission.
4. Submission of a paper for review is interpreted as a statement that the permission to reproduce and company clearance, if applicable, have been acquired.
5. The manuscript of a paper intended for publication in the journal may be reproduced and used elsewhere by the author, with the understanding that no use will be made of the material for commercial purposes.
6. Once the paper has been prepared in publication format by the publisher, the permission of the publisher is required for any use of the paper.
Reprints
25 reprints of each article are supplied free of charge. Additional reprints can be ordered on a reprint order form which will be sent to the corresponding author of the accepted article by the publisher.
Author's Discount
There is a 30% discount on all Elsevier Science book publications. An order form will be sent together with the proofs.
Compuscripts
Elsevier Science encourages the submission of discs of word-processed manuscripts and our aim is to allow you to provide us with your manuscript from your own system, without asking you to follow complicated instructions.
There are some basic points to be kept in mind, however, and we do have certain preferences. Having said this, however, with Elsevier's expertise and facilities it does not really matter which computer or word processing system you have used.
You are requested to submit the final text accompanied by a 3.5" or 5.25" disc version. Both double density (DD) and high density (HD) discs are acceptable. Make sure, however, that the disc is formatted according to its capacity (HD or DD) before copying the files onto it. As with the requirements for manuscript submission, the main text, list of references, tables and figure captions should be stored in separate text files with clearly identifiable file names. The format of these files depends on the word processor used. Texts written with Display Write, MultiMate, Microsoft Word, Samna Word, Sprint, TEX, Volkswriter, Wang PC, WordMARC, WordPerfect and Wordstar or supplied in DCA/RFT or DEC/DX format can be readily processed. In all other cases the preferred format is DOS text or ASCII. It is essential that the name and version of the word processing program, the type of computer on which the text was prepared, and the format of the text files are clearly indicated.
You are required to ensure that the contents of the disc corresponds exactly to the contents of the hardcopy manuscript. Discrepancies can lead to proofs of the wrong version being made. The word processed text should be in single column format. Keep the layout of the text as simple as possible; in particular, do not use the word processor's options to justify or to hyphenate the words.
If available, electronic files of the figures should also be included on a separate disc.
COMPUSCRIPT CHECKLIST
Please complete this list where appropriate and include it with the disc
Journal:
Title:
Author(s)
TEXT FILES
Computer: IBM compatible, Macintosh, other
Disc formatted with: MS-DOS/PC-DOS, Macintosh OS, other
Word processor/version:
Disc contents:
Remarks:
GRAPHIC FILES
Computer: IBM compatible, Macintosh, other
Disc formatted with: MS-DOS/PC-DOS, Macintosh OS, other
Drawing program/version:
Disc contents:
Remarks: Please send your manuscript (in fourfold) to the Editor-in-Chief: Dr. Nigel John Cook Geological Survey of Norway N- 7491 TRONDHEIM Norway e-mail address: Nigel.Cook@ngu.no
Editorial Board
Editor-in Chief:
N.J. Cook, Norges Geologiske Undersokelse, Trondheim, Norway
Editorial Board:
G.B. Arehart, University of Nevada, Reno, NV, USA
F.P. Bierlein, Monash University, Melbourne, Australia
K. Bogdanov, Sofia University, Sofia, Bulgaria
C.L. Ciobanu, Geological Survey of Norway, Trondheim, Norway
C.G. Cunningham, U.S. Geological Survey, Reston, VA, USA
F.R. Dias de Andrade, University of Sao Paulo, Sao Paulo, Brazil
H.A. Gilg, Technical University Munich, Garching, Germany
S.E. Kesler, University of Michigan, Ann Arbor, MI, USA
J. Lexa, Geological Survey of Slovak Republic, Bratislava, Slovak Republic
J. Mao, Chinese Academy of Geological Sciences, Beijing, Peoples Republic of China
E. Marcoux, University of Orleans, Orleans, France
R.K.W. Merkle, University of Pretoria, Pretoria, South Africa
Y. Pan, University of Saskatchewan, Saskatoon, Canada
S.M. Rowins, University of British Columbia, Vancouver, BC, Canada
J.A. Saunders, Auburn University, Auburn, AL, USA
R. Seltmann, The Natural History Museum, London, UK
A. Yakubchuk, Toronto, Canada
K. Zaw, University of Tasmania, Hobart, Tasmania, Australia Box
|
刊名字顺( Alphabetical List of Journals):
返回页首 