期刊名称：JOURNAL OF RHEOLOGY
 期刊简介(About the journal)
投稿须知(Instructions to Authors)
编辑部信息(Editorial Board)
About the journal
|
The Journal of Rheology® (ISSN: 0148-6055), formerly the Transactions of The Society of Rheology, is published six times per year (Jan./Feb., Mar./Apr., May/Jun., Jul./Aug., Sep./Oct., and Nov./Dec.), one volume per year, by The Society of Rheology, a member society of the American Institute of Physics, through the American Institute of Physics, Suite 1NO1, 2 Huntington Quadrangle, Melville, NY 11747-4502. POSTMASTER: Send address changes to AIP Circulation and Fulfillment Division, Suite 1NO1, 2 Huntington Quadrangle, Melville, NY 11747-4502. Periodicals postage paid at Huntington Station, NY, and additional mailing offices. |
Instructions to Authors
- Manuscripts for the Journal of Rheology?/font> should be submitted to the Editor, Morton M. Denn, Department of Chemical Engineering, University of California at Berkeley, Berkeley, CA 94720-1462. Communication with the editor by electronic mail is encouraged (e-mail: JOR@cchem.berkeley.edu). Address all other correspondence to AIP, Suite 1NO1, 2 Huntington Quadrangle, Melville, NY 11747-4502.
- It is the preference of the Editor that papers be published in the English language.
- Manuscripts should be submitted in quintuplicate, typed double space throughout and on one side of each sheet only, on a heavy grade of 21.5 ?28-cm paper with margins of at least 2.5 cm on all sides.
- A short synopsis (maximum length 200 words) is required for all papers. This synopsis should be carefully prepared, for it is automatically the source of most abstracts. The synopsis should be a summary of the entire paper, not the conclusions alone, and it should precede the main body of the paper.
- The paper should be reasonably subdivided into sections and, if necessary, subsections.
- Authors are encouraged to use the International System of Units (SI Units) and their standard abbreviations where possible. The notation should conform to the official standards of The Society of Rheology as adopted in 1984. The most recent version was published in Vol. 39, pages 253-265 (1995). The text is also available on The Society of Rheology World Wide Web page at http://www.rheology.org/sor/.
-
References should be cited in the text, using the name of the first author or two, and the year of the publication. For example: ‘‘Prior work by MacMillan (1989), by Edwards and Beris (1989), and by Kalika and co-workers (1989)...’’ Both authors are cited when there are two and the phrases ‘‘and co-workers’’ or ‘‘et al.’’ are employed to cite a publication having more than two authors. The references are compiled at the end of the manuscript in alphabetical order, the title of the paper or book cited is to be included and the volume number, complete pagination, and year of the reference given. As an example we may cite:
| Edwards, B. J. and A. N. Beris, ‘‘Order parameter representation of spatial inhomogeneities in polymeric liquid crystals,’’ J. Rheol. 33, 1189-1193 (1989). |
All references must be accessible; citations of ‘‘submitted’’ or ‘‘in preparation’’ manuscripts are not permitted.
- Please supply numbers and titles for all tables. All table columns should have an explanatory heading.
- Illustrations published in the journal are either scanned by AIP using a digital scanner or received electronically from the author, and integrated with the text of the article, creating completely electronic pages. To receive optimal quality, we strongly encourage you to send electronic graphics files to AIP, rather than laser output. (Note: If you are submitting electronic graphics files, you are still required to send hardcopies of the figures to the Editorial Office. Adherence to electronic submission instructions is crucial. If your electronic files are received after AIP has already processed the hardcopy illustrations, the electronic files will not be used.) Please adhere to the following guidelines when preparing your illustrations for submission:
Sizing Illustrations (Electronic Graphics Files and Hardcopy)
- Prepare illustrations in the final published size, not oversized or undersized. Size your illustrations according to your journal's specifications. Submit each illustration at the final size in which it will appear in the journal. The standard is 12.7-cm maximum width (5" or 30 picas) for one column. This is especially important for screened or shaded illustrations; reduction of screened/shaded originals during the digitizing process introduces an unacceptable moir?pattern.
- Ensure a minimum of 8-point type size (2.8 mm high; 1/8" high) and 1-point line width within illustrations. Ensure that line weights will be 0.5 points or greater in the final published size. Line weights below 0.5 points will reproduce poorly. Avoid inconsistencies in lettering within individual figures, and from one figure to the next. Lettering and symbols cannot be handwritten. Avoid small open symbols that tend to fill in if any reduction is necessary.
Preparation of Hardcopy Illustrations for Scanning
- Number figures in the order in which they appear in text. Label illustrations with their number, the name of the first author, and the journal, on the front of the figure well outside the image area.
- Place only one figure per page (including all parts). Place all parts of the same figure on one sheet of white bond paper, spaced 1/4 in. apart, using a glue stick or wax on the back of the illustration and leaving a 2-in. bottom margin. Label all figure parts with (a), (b), etc. Make sure each figure is straight on the page. Photocopies of artwork are not acceptable.
- Do not use correction fluid or tape on illustrations. The scanner is extremely sensitive and reproduces all flaws (e.g., correction fluid, tape, smudges, dust). Do not write on the back of the figure because it will be picked up by the scanner.
- Authors?strong> laser-generated graphics are acceptable only if the lettering and lines are dark enough, and thick enough, to reproduce clearly, especially if reduction is required. Maximum black-white contrast is necessary. Choose a laser printer with the highest dot-per-inch (dpi) available (i.e., the highest resolution possible). Remember that fine lines in laser-generated graphics tend to disappear upon reduction, even if the oversized original looks acceptable.
- Submit continuous-tone photographs in final published size on white glossy or matte paper. Avoid glossy paper stock that is off-white, ivory, or colored because contrast within the illustration will be lost in reproduction. Print the photograph with more contrast than is desired in the final printed journal page. Avoid dull, textured paper stock, which will cause illustrations to lose contrast and detail when reproduced.
Preparation of Electronic Graphics Files
- We recommend that all halftone art (screened art), shaded figures, and combinations (line art + halftone) be submitted electronically. Computer-generated illustrations output to desktop laser printers produce a screen. These figures are most problematic in the scanning process, because scanning screened output produces an unacceptable moir? pattern.
- Acceptable formats: Graphics must be submitted as PostScript, EPS (using either Arial or Times Roman fonts), or TIFF (lzw compressed). Do not send application files, e.g., Corel Draw, etc.
- Settings: Set the graphic for 600 dpi resolution for line art, 264 dpi for halftones (noncompressed), and 600 dpi for combinations (line art + halftone). Save the files to grayscale (B/W), not color.
- Make sure there is only ONE figure per file. Each figure file should include all parts of the figure. For example, if Figure 1 contains three parts (a, b, c), then all of the parts should be combined in a single file for Figure 1.
- Full instructions will be sent to you after your article has been accepted for publication.
Detailed instructions for submitting electronic graphics to AIP and a glossary of terms may be found on the AIP Physics Information Netsite at www.aip.org/epub/submitgraph.html
- Please supply captions for all figures and compile these on a separate sheet.
- Authors are cautioned to type¡ªwherever possible¡ªall mathematical and chemical symbols, equations, and formulas. If these must be handwritten, please print clearly and leave ample space above and below for printer’s marks; please use only ink. All Greek or unusual symbols should be identified in the margin the first time they are used. Please distinguish in the margins of the manuscript between capital and small letters of the alphabet whenever confusion may arise (e.g., k, K, k). Powers of ten should be used for magnitudes; the E + XX nomenclature produced by some graphics programs is not acceptable. Please underline with a wavy line all vector quantities or use boldface type. Use fractional exponents to avoid root signs. The symbols used should conform to the Society's Official Nomenclature whenever possible.
- AIP is accepting author-prepared computer files for use in production. If REVTeX, LaTeX, or Microsoft Word have been used to compose a manuscript, AIP may be able to use the file to produce author proofs. Do not send a disk with original submissions. Wait for further instructions from the editorial office on transmitting the file; do not send the file directly to AIP production until requested.
AIP uses translation software to convert REVTeX, LaTeX, or MS Word files into Xyvision composition files for production. For this project to be of benefit to both the author and the production staff, it is imperative that the guidelines as documented in either the REVTeX toolbox or the MS Word toolbox be followed precisely. Each file will be evaluated for appropriateness; authors will receive notice with their galley proofs as to whether or not their file was used. Authors will also receive a feedback form with their proofs, detailing any problems AIP encountered in processing the file.
The REVTeX toolbox is available via anonymous ftp on the Internet from ftp.aip.org in the directory \pub\revtex. The MS Word toolbox is available via anonymous ftp from ftp.aip.org. Move to the directory /ems, then follow the instructions given on the screen. The MS Word toolbox is also accessible via the AIP HomePage (http://www.aip.org). If electronic retrieval is not possible, you may receive the REVTeX toolbox or the MS Word toolbox on disk by e-mail, contact toolkits@aip.org. Please e-mail: esubs@aip.org if you have any questions about this or other electronic publishing activities of the American Institute of Physics.
- This journal does not assess page charges and provides 25 free reprints. Additional reprints, if desired, may be purchased when galley proofs of manuscripts are received.
- Under the provisions of U.S. copyright law, effective January 1978, the copyright must be explicitly transferred from author to publisher to enable the publisher to assure maximum dissemination of the author's work. A copy of the transfer agreement to be used for the Journal of Rheology?/font> is printed in this issue and on the world-wide web at http://www.rheology.org/sor/publications/j_rheology/. Additional copies are available from the Editor, or authors may photocopy the agreement from the journal. A copy of that agreement, executed and signed by the author, is now required with each manuscript submission. (If the article is a ‘‘work made for hire’’ the agreement must be signed by the employer.)
Manuscripts should be submitted to the Editor, Morton M. Denn, Department of Chemical Engineering, University of California at Berkeley, Berkeley, CA 94720-1462 (E-mail: jor@cchem.berkeley.edu). Information for contributors appears in the first issue of each volume. This journal does not assess page charges and provides 25 free reprints of each manuscript published. Additional copies may be purchased; a price list is provided with the galley proofs. All other correspondence should be addressed to the American Institute of Physics, Suite 1NO1, 2 Huntington Quadrangle, Melville, NY 11747-4502, c/o Journal of Rheology®.
Electronic Physics Auxiliary Publication Service (EPAPS): EPAPS is a low-cost electronic depository for material that is supplemental to a journal article. For a nominal fee, authors may submit multimedia (e.g., movie files, audio files, 3D rendering files), color figures, data tables, etc. Retrieval instructions are footnotes in the related published paper. Prominent links in the online journal article allow users to navigate directly to the associated EPAPS deposit. Direct requests to the Editor; for additional information, see http://www.aip.org/pubservs/epaps.html.
Editor's Notice: Letters to the Editor, for publication, represent an important way for readers to call attention to errors or omissions in published manuscripts. These are always welcome and are earnestly solicited. The Editor would also welcome critiques concerning the journal and its contents which are not meant for publication and would be appreciative of receiving readers' views with regularity. Please be sure, however, that such more personal comments are marked clearly as being "not for publication." The contents of this journal are indexed by the following: Science Citation Index, Current Contents/ Physical, Chemical and Earth Sciences, Engineering Index, Chemical Abstracts, Applied Mechanics Reviews, RAPRA Abstracts, Physics Abstracts, and SPIN.
The Society of Rheology: Information about the Society, its functions, meetings, and services, can be obtained by contacting Ms. Janis Bennett at the American Institute of Physics, Suite 1NO1, 2 Huntington Quadrangle, Melville, NY 11747-4502; Telephone 516-576-2403; Fax 516-576-2223; e-mail: jbennet@aip.org and via the Society's World Wide Web home page at http://www.rheology.org/sor/.
Editorial Production: Deborah McHone, Manager, e-mail: dmchone@aip.org; Susan Kaminer, Senior Production Editor, e-mail: skaminer@aip.org; Cathleen Nelson, Production Editor, e-mail: cnelson@aip.org
Copyright © // 2004 by The Society of Rheology. All rights reserved.
Except under the provisions of a site license for the Journal of Rheology Online, no part of this journal may be reproduced in any form or by any means, stored electronically, or transmitted by any means without permission in writing from the Editor.
Copying: Single copies of individual articles may be made for private use or research. Authorization is given (as indicated by the Item Fee Code for this publication) to copy articles beyond the use permitted by Sections 107 and 108 of the U. S. Copyright Law, provided the copying fee of $20 per copy per article is paid to the Copyright Clearance Center, 222 Rosewood Drive, Danvers, MA 01923, USA. Persons desiring to photocopy materials for classroom use should contact the CCC Academic Permissions Service. The Item Fee Code for this publication is 0148-6055/2003 $20.00. Authorization does not extend to systematic or multiple reproduction, to copying for promotional purposes, to electronic storage or distribution, or to republication in any form. In all such cases, specific written permission from the Editor must be obtained.
Permission for Other Use: Permission is granted to quote from the journal with the customary acknowledgment of the source. To reprint a figure, table, or other excerpt requires the consent of the Editor and one of the authors.
Editorial Board
Manuscripts should be submitted to the Editor, Morton M. Denn, Department of Chemical Engineering, University of California at Berkeley, Berkeley, CA 94720-1462 (E-mail: jor@cchem.berkeley.edu). Information for contributors appears in the first issue of each volume. This journal does not assess page charges and provides 25 free reprints of each manuscript published. Additional copies may be purchased; a price list is provided with the galley proofs. All other correspondence should be addressed to the American Institute of Physics, Suite 1NO1, 2 Huntington Quadrangle, Melville, NY 11747-4502, c/o Journal of Rheology®.
Editorial Production: Deborah McHone, Manager, e-mail: dmchone@aip.org; Susan Kaminer, Senior Production Editor, e-mail: skaminer@aip.org; Cathleen Nelson, Production Editor, e-mail: cnelson@aip.org
Editor
- Morton M. Denn
Associate Editor for Business
- Jeffrey Giacomin
Editorial Board
-
Robert C. Armstrong
Guy C. Berry
Pierre J. Carreau
Nino Grizzuti
Ronald G. Larson
Hans Martin Laun
Seung Jong Lee
Toshiro Masuda
Gregory B. McKenna
|
|
Arthur B. Metzner
Paula Moldenaers
Hans Christian Öttinger
Jean-Michel Piau
William B. Russel
Matthew V. Tirrell
Kenneth Walters
H. Henning Winter
Kurt F. Wissbrun
|
|
刊名字顺( Alphabetical List of Journals):
返回页首 