期刊名称：JOURNAL OF MAGNETIC RESONANCE
 期刊简介(About the journal)
投稿须知(Instructions to Authors)
编辑部信息(Editorial Board)
About the journal
The Journal of Magnetic Resonance presents original papers in the fields of nuclear magnetic resonance, electron spin resonance, and nuclear quadrupole resonance spectroscopy, as well as in related experimental techniques. The subjects covered include the principles underlying these methods; significant experimental results, especially those leading to spectral correlations likely to be of general interest to scientists in these areas; and descriptions of apparatus, experimental techniques, procedures of spectral analysis and interpretation, and computational methods.
The unified format as of 1997 integrates methods, data, and substances of interest to those working with systems of biological or biochemical significance. Together with the results of studies of structure, dynamics, and interactions of biomolecules, as well as analyses comparing results from magnetic resonance methods with those deduced from other techniques, the journal also publishes papers on in vivo imaging methods and localized spectroscopy.
Research Areas include:
Multiple-quantum spectroscopy
Gradient-enhanced spectroscopy
Spin-echo methods
Quadrupolar nuclei
Pattern recognition in magnetic
Studies of structure and resonance interactions of biomolecules
Magic-angle spinning of solids
Localized spectroscopy and imaging
Time-resolved EPR
Coherence pathway selection
Physiological applications of spectroscopy
Spectral editing
ENDOR and ELDOR methods
Nuclear Overhauser experiments
Data analysis by non-FT methods
Indirect detection methods
Instructions to Authors
Submission of Manuscripts
There are no submission fees or page charges. Each manuscript should be accompanied by a letter outlining the basic findings of the paper and their significance.
Online Submission. Journal of Magnetic Resonance manuscripts may be submitted using the Elsevier electronic submission tool. To use this submission route, please go to the Web site and upload your article and its associated artwork. A PDF is generated and the reviewing process is carried out using that PDF. All correspondence between editor and author is performed by e-mail, and paper copies are not required at the original submission stage. To submit your paper online, please Click here.
Alternative Methods of Submission. Authors also have the option of transmitting the text and art of the manuscript in electronic form, via computer disk or e-mail, each time a new version is submitted (please label files with manuscript/production number). Submission as an e-mail attachment is acceptable provided that all files are included in a single archive the size of which does not exceed 2 megabytes (jmr@elsevier.com). Manuscripts prepared using TeX or LaTeX are welcome (see below). Hard-copy printouts of the manuscript and art that exactly match the electronic file must be supplied along with the electronic file. The manuscript will be edited according to the style of the journal, and authors must read the proofs carefully.
Manuscripts are accepted for review with the understanding that no substantial portion of the study has been published or is under consideration for publication elsewhere and that its submission for publication has been approved by all of the authors and by the institution where the work was carried out. Written authorization may be required at the Editor's discretion. For the benefit of the reviewers, two copies of all crucial, unpublished references, i.e., 'submitted for publication' or 'in press,' must accompany the manuscript. Articles, Communications, and any other material published in the Journal of Magnetic Resonance represent the opinions of the author(s) and should not be construed to reflect the opinions of the Editor and the Publisher. Manuscripts that do not meet the general criteria or standards for publication in Journal of Magnetic Resonance will be immediately returned to the authors, without detailed review.
Copyright and Permissions
Authors submitting a manuscript do so on the understanding that if the manuscript is accepted for publication, copyright in the article, including the right to reproduce the article in all forms and media, shall be assigned exclusively to the Publisher. The Copyright Transfer Agreement should be signed by the appropriate person.
Authors are responsible for obtaining permissions to reprint previously published figures, tables, and other material.
Templates
LaTeX templates and detailed documentation for their use are available for downloading from the Elsevier LaTeX Support page (http://www.elsevier.com/locate/latex). Note that the use of other specialized versions of TeX or extensive use of custom macros may necessitate conventional typesetting from the hard-copy manuscript. The use of templates is optional.
If the LaTeX file is suitable, proofs will be produced without rekeying the text. It should be noted that due to defined typesetting standards and the complex requirements of electronic publishing, the Publisher will not always be able to exactly match the layout the author has submitted. The template is only intended to be used in assisting with the preparation and submission of manuscripts and its adoption will neither speed nor delay publication. Elsevier can handle most major word processing packages and in general most formatting applied by authors for style and layout is replaced when the article is being typeset.
Types of Papers
The journal will publish two types of papers, Articles and Communications. Articles may be of any length; however, Communications must be short, corresponding to three to six printed pages. Both types of papers will have the same format, with a title page and abstract followed by the various sections of the manuscript. Although not all sections are required, they should be in the following order: Introduction, Results, Discussion, Conclusions, Experimental, Acknowledgments, References, tables, figure legends, figures. In Communications and short Articles, it may be more convenient to include the experimental details in the figure legends rather than as a separate section.
Every effort will be made to process papers rapidly. Special steps will be taken to accelerate the handling of Communications; therefore the letter accompanying the submitted manuscript must explain why the paper merits accelerated review. In addition, a Communication will require no or only minor revisions. If major revisions are needed, then the paper will be treated as a regular Article.
Books for review should be submitted in duplicate. The Editor will decide whether the book is suitable for review in the journal and if so will then assign a reviewer.
Manuscripts, books for review, and meeting announcements should be sent to the Editor at the address listed above.
Preparation of Manuscript
Manuscripts should be double-spaced throughout on one side of 8.5 x 11-inch or A4 white paper. Pages should be numbered consecutively.
The Title Page (p. 1) should contain the article title, authors' names and complete affiliations, footnotes to the title, and the address for manuscript correspondence (including e-mail address and telephone and fax numbers).
The Abstract (p. 2) should be completely self-contained, having no references to items appearing in the body of the manuscript, and should summarize the main conclusions of the paper. Five distinguishing keywords should be listed below the abstract on the second page of the manuscript.
References to the literature should be cited by number in brackets in the text and listed in numerical order at the end. Use the most recent edition of the Chemical Abstracts Service Source Index for abbreviations of journal titles. Only articles that have been published or are in press should be included in the references and the name of the journal should be included. Unpublished results or personal communications should be cited as such in the text.
[1] R.L. Haner, W. Llanos, L. Mueller, Small volume flow probe for automated direct-injection NMR analysis: design and performance, J. Magn. Reson. 143 (2000) 69-78.
[2] R.R. Ernst, G. Bodenhausen, A. Wokaun, Principles of Nuclear Magnetic Resonance in One and Two Dimensions, Clarendon Press, Oxford, 1987.
[3] A. Bax, S. Grzesiek, Methodological advances in protein NMR, in: G.M. Clore, A.M. Gronenborn (Eds.), NMR of Proteins Macmillan, London, 1993, pp. 33-52.
Equations are numbered in one sequence throughout a paper, and equation numbers are given in parentheses to the right of the equation; references in the text to equations should be in the form "Eq. [3]." Nonstandard mathematical symbols should be clearly identified, if necessary in a separate list that defines the symbol, not its mathematical meaning.
Figures should be in a finished form suitable for publication. Number figures consecutively with Arabic numerals and indicate the top of the figure and the author(s) name(s) on the back of each figure. Lettering on drawings should be professional quality or generated by high-resolution computer graphics and must be large enough to withstand appropriate reduction for publication.
Color Figures. If, together with your accepted article, you submit usable color figures, Elsevier will ensure that these figures will appear in color on the Web (e.g., ScienceDirect and other sites) at no additional charge regardless of whether these illustrations are reproduced in color in the printed version. For color reproduction in print, you will receive information regarding the costs after receipt of your accepted article. For further information on the preparation of electronic artwork, please see http://authors.elsevier.com/artwork.
Please note: Because of technical complications that can arise in converting color figures to "gray scale" (for the printed version should you not opt for color in print), please submit in addition usable black-and-white prints of all illustrations.
Cover Illustrations for each issue will generally be selected from the Articles and Communications contained in that issue. The Editor welcomes suggestions from authors for cover illustrations in the letters that accompany the manuscripts when they are submitted. The cover illustration may be a figure from the paper or a complementary figure. A short legend should accompany the figure.
Tables should be numbered consecutively with Arabic numerals in order of appearance in the text. Type each table double-spaced on a separate page with a short descriptive title typed directly above and with essential footnotes below. Authors should submit complex tables as camera-ready copy.
Proofs
Proofs will be sent to the corresponding author. To avoid delay in publication, only necessary changes should be made, and proofs should be returned promptly. Authors will be charged for alterations that exceed 10% of the total cost of composition.
Structural Data
Manuscripts must carry a statement that protein or nucleic acid structural data, including NMR constraints, and the derived atomic coordinates have been deposited with an appropriate data bank. The data bank reference number should be quoted in the paper along with the specified release date. The maximum delay for release of data should be 2 years. In the absence of a specified release date, it will be assumed that the material will be available immediately.
Supplementary Material
Authors are strongly encouraged to deposit chemical shift assignments of proteins and nucleic acids with the BioMagResBank at the University of Wisconsin (URL http://www.bmrb.wisc.edu). For other types of materials, please contact the Editor, since several methods of data storage and access are currently under consideration.
Pulse Sequences
Authors are strongly encouraged to deposit all new pulse sequences with the BioMagResBank at the University of Wisconsin (http://www.bmrb.wisc.edu.).
Welcome to the Elsevier online submission service. This service has been designed to be as easy as possible to use. Authors can upload their article as a LaTeX, Microsoft?(MS) Word?/B> or WordPerfect?/B>. It is also possible to submit an article in PostScript or Adobe?Acrobat?PDF format, but if the article is accepted it will be necessary to send in the original source files.
The system generates an Adobe Acrobat PDF version of the article which is used for the reviewing process. Authors, Reviewers and Editors send and receive all correspondence by e-mail and no paper correspondence is necessary. Note: articles are converted into PDF for the review process but may be edited after acceptance to follow journal standards.
 Click here for a walkthrough of the online submission process
Journal specific guidelines on types of article accepted and how to prepare your article can be found in the Author Gateway journal page, in the Guide for Authors.
Word Processor Formats
Please submit your article as a file in one of the following formats:
- MS Word 6
- MS Word 97
- MS Word 98 for Macintosh?
- MS Word 2000
- WordPerfect 6.1 or higher
- RTF
Important notes on word processor file preparation
- For review purposes you must submit your article as a SINGLE FILE. You need to embed all your figures and tables within this file.
- Fonts: Please choose Times, Times New Roman, Courier, Arial or Helvetica fonts as much as possible. Other fonts (e.g. Chinese, Japanese and Korean (CJK) character fonts) may cause the PDF conversion to fail. If your manuscript does not correctly convert to PDF, replace the font(s) where necessary and try again.
- Most formatting codes will be removed or replaced on processing your article so there is no need for you to apply excessive layout styling. In addition, avoid options such as automatic word breaking, justified layout, double columns, automatic paragraph numbering (especially for numbered references). However, do use bold face, italic, subscripts, superscripts, etc.
- For the production of your article you will also have to submit your graphic files separately as high resolution graphics. (See also the section on Electronic Artwork below.)
LaTex
For general instructions on how to prepare an article using LaTeX, see the Latex file guidelines. In addition, please note the following:
- Include all your graphics in the LaTeX file, e.g. with the \includegraphics from the graphics package.
- Submit any special class (or style) files and other macro files with your article. We are using an up-to-date TeX installation (TeXLive5d), so you need not include any of the standard packages.
PDF
If possible, please submit the original LaTeX or word processor files: this website will take care of converting them into a PDF file.
If you wish to create your own PDF, download the ES_review.joboptions to the "Settings" folder of your Acrobat Distiller and choose the "ES_review" joboptions before converting your file.
Note: This joboptions file is for Adobe Distiller v4.05 and later. If you are still working with an older version, or if you need more help, see. PDF settings .
File naming
To avoid confusion, please make sure your file has a short, descriptive name. Short means less than 30 characters and descriptive means names like figure1.tif and smith-article-version1.doc.
For the production of your paper in the journal we need high-resolution graphic files in either TIFF or EPS. For information on how to prepare your artwork for electronic submission, see http://authors.elsevier.com/artwork.
- Find the journal on the Author Gateway by searching or browsing
- Read the 'Guide for Authors' for specific instructions on submitting a paper to that journal
- Click on the 'online submisssion' link in the right hand journal services box
- Log in if you are already a registered user (if you are not already a registered user you need to 'create a profile' by submitting your contact details and choosing a username/password combination). This creates a completely secure environment to send your paper to us online.
- Once you are logged in you are taken to the Journal's submission page where you choose to 'Submit New Paper'. You are taken through the following steps:
- Enter data related to your manuscript (Title, Authors, Keywords etc.)
- Choose the accepting Editor. (if the Journal has more than one Editor, you will find a drop-down list with the names of all the Editors of this Journal to whom you may submit your article. The journal Guide for Authors will give you more information on how to decide which Editor to choose)
- Upload your manuscript file(s). See the section on File Formats for more information.
- The website creates a PDF from your source file(s). You must check this PDF as it will be sent to the reviewers. If the PDF is not OK edit and resubmit your source file(s) or contacts author support for advice - PDF/PostScript source can be submitted as well as LaTeX/Word Processor files.
- Upload your figures separately for the production process and select how you want your figures to appear in print (colour or black and white). If the figures are too large (>5 Mb) you may send manually direct to the editor.
- Check your submission details are correct and press submit to send your files to the journal editor
- You will receive an acknowledgement email to say the paper is under review
- Until the review process is completed you will not be able to update your submission from the website. If you have made a mistake you must contact the editor.
If revision is required:
- You will receive an email from the editor
- You can revise your paper by using the link in the email which takes you back to the online submission service (when revising your paper all the previous information is retained - no retyping is needed but it can be updated and new files attached). Alternatively you can access the paper directly from the Journal's online submission page or from 'my home' on the Author Gateway.
- Make any changes necessary and add or remove figures/other files
- A revised PDF is created which is sent to the editor at the end of the process and you receive an acknowledgement email
- Once your new version is submitted you will not be able to make any further revisions from the website
After submission
For information on the status of your article, please contact the Editor to whom you submitted your article. There is an email link to the editor in the journal's online submission service or on 'my home' in the Author Gateway.
You will receive an email containing the final decision of the Editor, containing editorial comments.
Once your paper has been accepted you can track its progress from your home page on the Author Gateway. It will automatically move from the 'Online Submissions' section of 'my home' to 'Accepted Papers'. From here you can view the progress of your paper through the production process to the final published article. We will also email you with the major milestones, including a direct link to your article when it appears on ScienceDirect. For more information on tracking go to Getting Published with Elsevier.
If you have any comments about this document, or any difficulties using this electronic submission site, please contact Author Support at Elsevier.
Editorial Board
- Editors:
- S.J. Opella, University of California at San Diego
- Advances in Magnetic Resonance Editor:
- W.S. Warren, Princeton University
- Associate Editors:
- J.J.H. Ackerman, Washington University in St. Louis
L. Frydman, Weizmann Institute of Science
A. Gronenborn, National Institutes fo Health
C. Griesinger, Max Planck Institute for Biophysical Chemistry
A. Schweiger, Swiss Federal Institute of Technology
- Editorial Board:
- Y. Arata, RIKEN
L. Banci, University of Florence
A. Bax, National Institutes of Health
I. Bertini, University of Florence
G. Bodenhausen, Ecole Normale Superieure, Paris and University of Lausanne
M. Bowman, Pacific NW National Laboratory
W.S. Brey, University of Florida
P.T. Callaghan, The MacDiarmid Institute for Advanced Materials and Nanotechnology
G.M. Clore, National Institutes of Health
D.G. Cory, Massachusetts Institute of Technology
T.A. Cross, Florida State University
K-P. Dinse, Physikalische Chemie III
G. Drobny, University of Washington
H.J. Dyson, Scirpps Research Institute
G.R. Eaton, University of Denver
P. Ellis, Pacific Northwest National Laboratory
R. Ernst, Swiss Federal Institute of Technology
J. Feigon, University of California at Los Angeles
E. Fukushima, New Mexico Resonance
D. Gadian, Institute of Child Health Radiology and Physics Unit
B.J. Gaffney, Florida State University
D. Goldfarb, Weizmann Institute of Science
C.P. Grey, State University of New York at Stony Brook
R.G. Griffin, Massachusetts Institute of Technology
A. Gräslund, Stockholm University
G. Harbison, University of Nebraska
Mei Hong, Iowa State University
P.A. Jennings, University of California at San Diego
P. Jezzard, University of Oxford - FMRIB - Centre
M. Kainosho, Tokyo Metropolitan University
R. Kaptein, Utrecht University
L.E. Kay, University of Toronto
M.H. Levitt, University of Southampton
J.L. Markley, University of Wisconsin at Madison
A. McDermott, New York, USA
B.H. Meier, Swiss Federal Institute of Technology
D. Neuhaus, Medical Research Council
K. Nicolay, Eindhoven University of Technology
E. Oldfield, University of Illinois
A.G. Palmer, Columbia University
A. Pines, University of California at Berkeley
J.H. Prestegard, University of Georgia
T. Prisner, Johann Wolfgang Goethe University
M. Rance, University of Cincinnati
M. Rance, University of Cincinnati
C Redfield, Oxford Centre for Molecular Sciences
J. Schaefer, Washington University
K. Schmidt-Rohr, Iowa State University
A.J. Shaka, University of California at Irvine
V. Sklenar, Masaryk University
O.W. Sorensen, Carlsberg Laboratory
C. Sotak, Worcester Polytechnic Institute
H.W. Spiess, Max Planck Institut, Mainz
D. Suter, Universität Dortmund
B.D. Sykes, University of Alberta
T. Terao, Kyoto University
L.K. Thompson, University of Massachusetts
R. Tycko, National Institutes of Health
P. van Zijl, Johns Hopkins University
G. Wagner, Harvard University
A. Watts, Oxford University
J.S. Waugh, Massachusetts Institute of Technology
D.E. Wemmer, University of California at Berkeley
R. Wittebort, University of Louisville
K. Wüthrich, Swiss Federal Institute of Technology
- Founding Editor:
- W.S. Brey
Mail Submission. Manuscripts must be written in English, and five copies should be submitted, including sets of good-quality figures, to:
Stanley J. Opella
Editor, Journal of Magnetic Resonance
Editorial Office
525 B Street, Suite 1900
San Diego, CA 92101-4495, USA
Tel: (619) 699-6469; Fax: (619) 699-6855
E-mail: jmr@elsevier.com
|
刊名字顺( Alphabetical List of Journals):
返回页首 