期刊名称：JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH
 期刊简介(About the journal)
投稿须知(Instructions to Authors)
编辑部信息(Editorial Board)
About the journal
The Journal of Constructional Steel Research provides an international forum for the presentation and discussion of the latest developments in structural steel research and their applications. It is aimed not only at researchers but also at those likely to be most affected by research results, i.e. designers and fabricators. Original papers of a high standard dealing with all aspects of steel research including theoretical and experimental research on elements, assemblages, connection and material properties are considered for publication. Those presenting research findings in a form suitable for practical use are especially welcome. Papers reporting work in progress will also be included, provided the long-term practical implications of the research are evident, as will state-of-the-art papers, or those by designers and fabricators dealing with issues bearing directly on research. The journal will also present technical notes, book reviews, discussions and letters to the Editor. It is intended that at intervals summaries will be included indicating current research activities throughout the world, and reports of conferences and meetings related specifically to constructional steelwork. Announcements of conference and symposia are also included in the form of a calendar.
Related Conferences
Details of conferences and meetings, with links to websites, can be accessed under the News item.
Instructions to Authors
Submission of papers
Submission of a manuscript implies that it is not being considered contemporaneously for publication elsewhere. Submission of a multi-authored manuscript implies the consent of all the participating authors. All papers, which should be written in English, will be independently refereed.
Contributors in the Americas should submit their papers to Professor Bjorhovde, President, The Bjorhovde Group, PO Box 37168, Tucson, AZ 85740-7168, USA. Contributors in all other areas should send their papers to Professor Harding (Department of Civil Engineering, University of Surrey, Guildford, Surrey GU2 5XH, UK). Contributions can also be sent to a local member of the Editorial Board for submission to the Editors.
Types of contributions
Research papers; technical notes; research summaries; discussions; book reviews; letters to the editors; conference reports; announcements of conferences and symposia.
Manuscripts
Three copies should be provided, in double-spaced typing on pages of uniform size, with a wide margin at the left. Generally, the size of the manuscript should not exceed 6000 words or about 12 printed pages. Each paper should be provided with an Abstract of about 100-150 words, reporting concisely on the purpose and results of the paper.
Wherever possible, authors should consult an issue of the journal for style and layout. The Editors reserve the right to adjust style to certain standards of uniformity.
The SI system should be used for all scientific and laboratory data; if, in certain instances, it is necessary to quote other units, these should be added in parentheses. Temperatures should be given in degrees Celsius. The unit 'billion' (109 in America, 1012 in Europe) is ambiguous and should not be used.
Tables, references and legends to illustrations should be typed on separate sheets and placed at the end of the paper. Footnotes should be avoided if they contain information which could equally well be included in the text.
Disks
For papers produced using a word-processor or TEX, please submit a disk, with the final revised version of the manuscript. The file on disk should correspond exactly to the hard copy. The operating system and the word-processor used should be specified clearly.
Illustrations or chemical structures in electronic format may be supplied provided that the file format and the program used to produce them is clearly indicated and that a hard copy is also supplied.
More detailed guidelines and further information are available from the publisher.
References
References to published work should be numbered sequentially in order of citation and given in the text by a superscript numeral, with a reference list, in numerical order, at the end of the paper. The list should give name(s) and initial(s) of author(s) and the exact title of the paper or book. For journals there should follow the title, volume number, year of issue and initial and final page numbers of article. For books there should follow the name(s) of the editor(s) (if appropriate), the name of the publisher and the town and year of publication. Where appropriate, initial and final page numbers should also be quoted. All references in this list should be indicated at some point in the text and vice-versa. Unpublished data or private communications should not appear in the reference list.
Illustrations
The original and two copies, which may be of a reduced size, of each illustration should be provided. Line drawings may be submitted in any medium providing that the image is black and very sharp. They should preferably all require the same degree of reduction; large diagrams, more than four times final size, are discouraged due to handling difficulties. The type area of the journal is 123 mm wide x 193 mm deep and lettering should therefore be large enough to be legible after reduction of the illustration to fit (ideally 7pt lettering after reduction). Photographs should be submitted as contrasting black-and-white prints on glossy paper. Each illustration must be clearly numbered and the name(s) of the author(s) of the paper written on the reverse side.
Proofs
The author (or the selected author where several are involved) will receive a set of proofs for checking. No new material may be inserted in the text at the time of proof reading unless accepted by the Editors. All joint communications must indicate the name and full postal address of the author to whom proofs should be sent.
Page charges and offprints
There will be no page charges. Fifty offprints of each paper will be supplied free of charge. Additional copies can be ordered at current printing prices.
Author Enquiries:
For enquiries relating to the submission of articles (including electronic submission where available)please visit the Author Gateway from Elsevier at http://authors.elsevier.com. The Author Gateway also provides the facility to track accepted articles and set up e-mail alerts to inform you of when an article's status changed, as well as detailed artwork guidelines, copyright information, frequently-asked questions and more.
Contact details for questions arising after acceptance of an article, especially those relating to proofs, are provided after registration of an article for publication
Editorial Board
- Editors:
- P.J. Dowling, Vice Chancellor, University of Surrey, Guildford, Surrey GU2 5XH, UK Email: P.Dowling@surrey.ac.uk
J.E. Harding, Director of External Relationships, University of Surrey, Guildford, Surrey GU2 5XH, UK Email: J.Harding@surrey.ac.uk
- North American Editor:
- R. Bjorhovde, The Bjorhovde Group, PO Box 37168, Tucson, AZ 85740-7168, USA Email: rbj@bjorhovde.com
- Editorial Board:
- C. Aguirre, Universidad Técnica Federico Santa María, Valparaiso, Chile
F.S.K. Bijlaard, TNO Building and Construction Research, Delft, The Netherlands
J.G. Bouwkamp, Technical University, Darmstadt, Germany
J. Brozzetti, CTICM, St Remy les Chevreuse, France
S.L. Chan, Hong Kong Polytechnic University, Hong Kong, China
A. Colson, Ministry of Public Works, Paris, France
G.G. Deierlein, Stanford University, CA, USA
J.W. Fisher, Lehigh University, Pennsylvania, USA
Y. Fukumoto, Fukuyama University, Japan
T.V. Galambos, University of Minnesota, MN, USA
K. Ghavami, Pontifica Universidade Catolica do Rio de Janerio, Brazil
S.C. Goel, University of Michigan, Ann Arbor, MI, US.A
G.J. Hancock, University of Sydney, New South Wales, Australia
K.D. Hjelmstad, University of Illinois, IL, USA
M. Ivanyi, Technical University of Budapest, Hungary
B. Johansson, Lule?University of Technology, Sweden
V. Kalyanaraman, Indian Institute of Technology, Madras, India
B. Kato, Welding Research Institute, Tokyo, Japan
A.R. Kemp, University of Witwatersrand, Johannesburg, South Africa
T. Kitada, Osaka City University, Osaka City, Japan
A.N. Kounadis, National Technical University of Athens, Greece
G.L. Kulak, University of Alberta, Edmonton, Canada
A.R.G. Lamas, Instituto Superior Tecnico, Lisboa, Portugal
P.K. Larsen, Norwegian Institute of Technology, Trondheim, Norway
R. Maquoi, Universite de Liège, Belgium
D.A. Nethercot, Imperial College, London, UK
R. Puthli, Karlsruhe University, Germany
T.M. Roberts, Cardiff University, Cardiff, UK
C.W. Roeder, University of Washington, WA, USA
G. Sedlacek, RWTH Aachen, Germany
N.E. Shanmugam, National University of Singapore, Singapore
M. Skaloud, Czechoslovak Academy of Sciences, Prague, Czech Republic
K. Takanashi, Chiba University, Japan
I. Vayas, National Technical University, Athens, Greece
Wai-Fah Chen, University of Hawaii, Honolulu, USA
D.W. White, Georgia Institute of Technology, GA, USA
H. Wright, University of Strathclyde, Glasgow, UK
R. Zandonini, University of Trento, Italy
A. Zingoni, University of Cape Town, South Africa
|
刊名字顺( Alphabetical List of Journals):
返回页首 