期刊名称：INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES
 期刊简介(About the journal)
投稿须知(Instructions to Authors)
编辑部信息(Editorial Board)
About the journal
This journal is concerned with original research, new developments, site measurements and case studies in rock mechanics and rock engineering. It provides an international forum for the publication of high quality papers on the subject of rock mechanics and the application of rock mechanics principles and techniques to mining and civil engineering projects built on or in rock masses. These projects include slopes, open-pit mines, quarries, shafts, tunnels, caverns, underground mines, metro systems, dams and hydro-electric stations, geothermal energy and radioactive waste disposal. Papers are welcomed on all relevant topics and especially on theoretical developments, analytical methods, numerical methods, rock testing, site investigation, design, back analysis, and case studies.
Instructions to Authors
Submission of PapersAuthors are requested to submit their original manuscript with three copies to:
Professor Akhtar S Khan, PO Box 591, Fulton, MD 20759-0591, USA.
Submission of a paper implies that it has not been published previously, that it is not under consideration for publication elsewhere, and that if accepted it will not be published elsewhere in the same form, in English or in any other language, without the written consent of the publisher. A statement to this effect should be included in the covering letter which accompanies the manuscript. Papers should be written in concise and correct English.
Manuscript PreparationGeneral: The Editors reserve the right to return manuscripts found deficient in style, reference format, form or clarity. Manuscripts must be typewritten, double-spaced with wide margins on one side of white paper. Good quality printouts with a font size of 12 or 10 pt are required. The corresponding author should be identified (include a Fax number and E-mail address). Full postal addresses must be given for all authors and should be given at the end of the manuscript after the references. Sections must be numbered with roman numerals, excluding Acknowledgements and References. Authors should consult a recent issue of the journal for style if possible. An electronic copy of the paper should accompany the final version. The Editors reserve the right to adjust style to certain standards of uniformity. Authors should retain a copy of their manuscript since we cannot accept responsibility for damage or loss of papers. Original manuscripts are discarded one month after publication unless the Publisher is asked to return original material after use.
Paper Length: Ideally, the length of the paper should not exceed 12,000 words; each figure or table should be counted as 250 words.
Text: Follow this order when typing manuscripts: Title, Authors, Affiliations, Abstract, Keywords, Main text, Acknowledgements, Appendix, References, Figure Captions and then Tables. The title pages should include (a) article title; (b) author names; (c) affiliations; (d) abstract; (e) keywords (see standard list published at the end of each issue); and (f) the corresponding author's telephone and fax numbers and E-mail address if available. Any acknowledgements of research assistance or support should follow the text before the references. Do not import the Figures or Tables into your text. The corresponding author should be identified with an asterisk and footnote. All other footnotes (except for table footnotes) should be identified with superscript Arabic numbers.
Symbols: Greek symbols must be clearly identified in the margin, including whether upper or lower case is intended. Boldface characters must be marked with a wavy underline. Other symbols and marks must be clearly identified.
References: All publications cited in the text should be presented in a list of references following the text of the manuscript. In the text refer to the author's name (without initials) and year of publication (e.g. "Since Peterson (1993) has shown that..." or "This is in the agreement with results obtained later (Kramer, 1994)"). For three or more authors use the first author followed by "et al.", in the text. The list of references should be arranged alphabetically by authors' names. The manuscript should be carefully checked to ensure that the spelling of authors' names and dates are exactly the same in the text as in the reference list.
References should be given in the following form:
Green, A. E., Naghdi, P.M., 1966. A thermodynamic development of elastic-plastic continua. In: Parkus, H., Sedov, L.I., (Eds.), Proceedings of the IUTAM Symposium on Irreversible Aspects of Continuum Mechanics and Transfer of Physical Characteristics in Moving Fluids, Springer-Verlag, Berlin, p. 117.
Truesdell, C.A., Noll, W., 1965. The non-linear field theories of mechanics. In: Hanbuch der Physik, Vol. III. Springer, Berlin, pp. 29-72.
Zhou, Y., Jonas, J.J., Savoie, J., Makinde, A., MacEwen, S.R, 1998. Effect of texture on earing in FCC metals: finite element simulations. Int J Plasticity 14 (1-3), 117-138.
Illustrations: All illustrations should be provided in camera-ready form, suitable for reproduction (which may include reduction) without retouching. Photographs, charts and diagrams are all to be referred to as "Figure(s)" and should be numbered consecutively in the order to which they are referred. They should accompany the manuscript, but should not be included within the text. All illustrations should be clearly marked on the back with the figure number and the author's name. All figures are to have a caption. Captions should be supplied on a separate sheet.
Line drawings: Good quality printouts on white paper produced in black ink are required. All lettering, graph lines and points on graphs should be sufficiently large and bold to permit reproduction when the diagram has been reduced to a size suitable for inclusion in the journal. Dye-line prints or photocopies are not suitable for reproduction. Do not use any type of shading on computer-generated illustrations.
Photographs: Original photographs must be supplied as they are to be reproduced (e.g. black and white or colour). If necessary, a scale should be marked on the photograph. Please note that photocopies of photographs are not acceptable.
Colour: Where colour figures are required the author will be charged at the current colour printing costs.
Tables: Tables should be numbered consecutively in Arabic numerals and given a suitable caption and each table typed on a separate sheet. Footnotes to tables should be typed below the table and should be referred to by superscript lowercase letters. No vertical rules should be used. Tables should not duplicate results presented elsewhere in the manuscript, (e.g. in graphs).
Disk submissionAuthors should submit a disk copy of their paper with the final version of the manuscript. The disk copy should match the hardcopy exactly. Always keep a backup copy of the disk file for reference and safety. Full details of disk submission and formats can be obtained from http://www.elsevier.nl/locate/disksub or from Author Services at Elsevier Science.
ProofsProofs will be sent to the author (first named author if no corresponding author is identified for multi-authored papers) and should be returned within 48 hours of receipt. Corrections should be restricted to typesetting errors; any others may be charged to the author. Any queries should be answered in full. Please note that authors are urged to check their proofs carefully before return, since the inclusion of late corrections cannot be guaranteed. Proofs are to be returned to the Log-in Department, Elsevier Science, The Boulevard, Langford Lane, Kidlington, Oxford OX5 1GB, UK.
OffprintsTwenty five offprints will be supplied free of charge. Additional offprints and copies of the issue can be ordered at a specially reduced rate using the order form sent to the corresponding author after the manuscript has been accepted. Orders for reprints (produced after publication of an article) will incur a 50% surcharge.
CopyrightAll authors must sign the "Transfer of Copyright" agreement before the article can be published. This transfer agreement enables Elsevier Science Ltd to protect the copyrighted material for the authors, without the author relinquishing his/her proprietary rights. The copyright transfer covers the exclusive rights to reproduce and distribute the article, including reprints, photographic reproductions, microfilm or any other reproductions of a similar nature, and translations. It also includes the right to adapt the article for use in conjunction with computer systems and programs, including reproduction or publication in machine-readable form and incorporation in retrieval systems. Authors are responsible for obtaining from the copyright holder permission to reproduce any material for which copyright already exists.
Author Enquiries
Authors can keep a track on the progress of their accepted article, and set up e-mail alerts informing them of changes to their manuscript's status, by using the "Track a Paper" feature of Elsevier's Author Gateway
Editorial Board
- Editor-in-Chief:
- A.S. Khan, Professor of Mechanical Engineering, ECS Building, University of Maryland-Baltimore County, Baltimore, MD 21250-5398, USA Tel: (410) 455 3301, Fax: (410) 455 1052, Email: khan@engr.umbc.edu
- Editorial Advisory Board:
- L. Anand, Massachusetts Institute of Technology, USA
R.D. Arsenault, University of Maryland, USA
F. Barlat, Alcoa Technical Center, USA
D. Benson, University of California, USA
M. Berveiller, Universita de Metz, France
M. Brünig, Universität Dortmund, Germany
O. Bruhns, Institute of Mechanics, Bochum, Germany
E.P. Busso, Imperial College of Science, UK
G. Cailetaud, Centre de Materiaux, Evry, France
J. Casey, University of California, USA
J-L. Chaboche, ONERA, France
P. Dawson, Cornell University, USA
J. Driver, Ecole des Mines de Saint Etienne, France
F. Dunne, University of Oxford, UK
H. Garmestani, Florida State University, USA
K.S. Havner, North Carolina State University, USA
Y. Huang, University of Illinois at Urbana-Champaign, USA
D.A. Hughes, Sandia National Laboratories, USA
S. Im, Korea Advanced Institute of Science and Technology
E. Krempl, Rensselaer Polytechnic Institute, USA
S. Kyriakides, University of Texas-Austin, USA
A. Lion, University of Kassel, Germany
P. Maudlin, Los Alamos National Laboratory, USA
D.L. McDowell, Georgia Institute of Technology, USA
K. Neale, Universita de Sherbrooke, Canada
N. Ohno, Nagoya University, Japan
M.-J. Pindera, University of Virginia, USA
K.R. Rajagopal, University of Pittsburgh, USA
K. Runesson, Chalmers University of Technology, Sweden
C. Teodosiu, Universita Paris-Nord, France
M. Tokuda, Mie University, Japan
L.S. Toth, Universit?de Metz, France
P. Van Houtte, Katholieke Univ-Leuven, Belgium
G. Voyiadjis, Louisiana State University, USA
G.J. Weng, Rutgers University, USA
T.W. Wright, US Army Research Laboratory, MD, USA
H. Zbib, Washington State University, USA
|
刊名字顺( Alphabetical List of Journals):
返回页首 