期刊名称：INTERNATIONAL JOURNAL OF ENGINEERING SCIENCE
 期刊简介(About the journal)
投稿须知(Instructions to Authors)
编辑部信息(Editorial Board)
About the journal
The International Journal of Engineering Science publishes original research pertaining to the application of the physical, chemical and mathematical sciences to engineering. Emphasis is given to those contributions concerned with the cross-fertilization of these fields and research in the allied regions of mechanics, electricity and magnetism, thermodynamics, physical chemistry, both from continuum and molecular points of view. Applied research involving recent developments is welcome in such interdisciplinary areas as biomechanics, system theory, energy and approximation theory, applied and computational mathematics, as applied to basic problems in engineering science
Instructions to Authors
The Editors will be pleased to receive contributions from all parts of the World. The types of article published by Information Systems are as follows.
Regular articles. As its name implies, this is the normal medium of publication. Although there is no fixed length, concise presentation is strongly favoured.
Reviews. On occasion, reviews by invitation of the Editors will be given.
Submission of articles
General
Submission of an article implies that the work described has not been published previously (except in the form of an abstract or as part of a published lecture or academic thesis), that it is not under consideration for publication elsewhere, that its publication is approved by all authors and tacitly or explicitly by the responsible authorities where the work was carried out, and that, if accepted, it will not be published elsewhere in the same form, in English or in any other language, without the written consent of the Publisher.
Upon acceptance of an article, authors will be asked to transfer copyright. This transfer will ensure the widest possible dissemination of information. A letter will be sent to the corresponding author confirming receipt of the manuscript. A form facilitating transfer of copyright will be provided.
Submission to the journal
Electronic Submissions only:
- You can submit your paper by E-mail to the editorial office is@elsevier.nl. Use the phrase "IS submission" in the subject line. You must send a printable file format (PDF, PS), and preferably as an attachment to the e-mail. The printable format file will be used for the reviewing process. You must also include the title and abstract as plain text embedded in the e-mail message. This will be used to route your paper.
- It is essential that authors provide fax and telephone numbers and an e-mail address when submitting a manuscript.
Sending accepted articles to Elsevier in electronic format
Wordprocessor documents
It is important that the file be saved in the native format of the wordprocessor used. The text should be in single-column format. Keep the layout of the text as simple as possible. Most formatting codes will be removed and replaced on processing the article. In particular, do not use the wordprocessor's options to justify text or to hyphenate words. However, do use bold face, italics, subscripts, superscripts etc. Do not embed 'graphically designed' equations or tables, but prepare these using the wordprocessor's facility. When preparing tables, if you are using a table grid, use only one grid for each individual table and not a grid for each row. If no grid is used, use tabs, not spaces, to align columns. The electronic text should be prepared in a way very similar to that of conventional manuscripts (see also Guide for electronic submission: http://authors.elsevier.com). Do not import the figures into the text file but, instead, indicate their approximate locations directly in the electronic text and on the manuscript. See also the section on Preparation of electronic illustrations. To avoid unnecessary errors you are strongly advised to use the 'spellchecker' function of your wordprocessor
LaTeX documents
If the LaTeX file is suitable, proofs will be produced without rekeying the text. The article should preferably be written using Elsevier Science's document class 'elsart', or alternatively the standard document class 'article'.
The Elsevier LaTeX package (including detailed instructions for LaTeX preparation) can be obtained from Elsevier's web site: http://www.elsevier.nl/locate/latex, or http://www.elsevier.com/locate/latex, or http://www.elsevier.co.jp/locate/latex, or from the Comprehensive TeX Archive Network (CTAN): see below. It consists of the files: elsart.cls (use this file if you are using LaTeX2e, the current version of LaTeX), elsart.sty and elsart13.sty (use these two files if you are using LaTeX3.09, the previous version of LaTeX), guidelines for users of elsart, a template file for quick start, and the instruction booklet "Preparing articles with LaTeX".
To obtain the package from CTAN, use direct access via FTP at ftp.dante.de (Germany), ftp.tex.ac.uk (UK), or ctan.tug.org (Massachusetts, USA) and go to the directory /tex-archive/macros/latex/contrib/supported/elsevier, or search for Elsevier with one of the CTAN search engines (http://ctan.tug.org/CTANfind.html, (http://www.tex.ac.uk/CTANfind.html or (http://www.dante.de/cgi-bin/ctan-index). CTAN is a mirrored network of ftp.tex.ac.uk, ftp.dante.de and ctan.tug.org, which are widely mirrored (see ftp://ctan.tug.org/tex-archive/README.mirrors) and hold up-to-date copies of all the public-domain versions of TeX, LaTeX, Metafont and ancillary programs.
Figures may be inserted in the usual way using an \includegraphics command, at the position in the article where they are cited.
Your LaTeX file will be most useful as input for the printed article if you obey the following rules of thumb:
1. Be consistent. If you use a macro for a phrase, use it throughout.
2. Use standard LaTeX mark-up. Do not hardcode your own layout for e.g. section headings, but use the usual LaTeX macro for this purpose.
3. Keep it simple. Do not define macros that accomplish complicated layout. They will also make the input process complicated.
4.
Preparation of text
Presentation of manuscript
General
Please write your text in good English (American or British usage is accepted, but not a mixture of these). Italics are not to be used for expressions of Latin origin, for example, in vivo, et al., per se. Use decimal points (not commas); use a space for thousands (10 000 and above).
Print the entire manuscript on one side of the paper only, using double spacing and wide (3 cm) margins. (Avoid full justification, i.e., a constant right-hand margin.) Ensure that each new paragraph is clearly indicated. Present tables and figure legends on separate pages at the end of the manuscript. If possible, consult a recent issue of the journal to become familiar with layout and conventions. Number all pages consecutively.
Provide the following data on the title page (in the order given).
Title. Concise and informative. Titles are often used in information-retrieval systems. Avoid abbreviations and formulae where possible.
Author names and affiliations. Where the family name may be ambiguous (e.g., a double name), please indicate this clearly. Present the authors' affiliation addresses (where the actual work was done) below the names. If the work was carried out at more than one address, indicate the affiliation(s) of each author with a lower-case superscript letter immediately after the author's name and in front of the appropriate address (provided for each affiliation, including the first one). Provide the full postal address of each affiliation, including the country name, and, if available, the e-mail address of each author.
Corresponding author. Clearly indicate who is willing to handle correspondence at all stages of refereeing and publication, also post-publication. Ensure that telephone and fax numbers are provided in addition to the e-mail address and the complete postal address.
Present/permanent address. If an author has moved since the work described in the article was done, or was visiting at the time, a 'Present address' (or 'Permanent address') may be indicated as a footnote to that author's name. The address at which the author actually did the work must be retained as the main, affiliation address. Superscript Arabic numerals are used for such footnotes.
Abstract. A concise and factual abstract is required. The abstract should state briefly the purpose of the research, the principal results and major conclusions. A structured abstract is required. For this, a recent copy of the journal should be consulted. An abstract is often presented separate from the article, so it must be able to stand alone.
References should therefore be avoided, but if essential, they must be cited in full, without reference to the reference list.
Non-standard or uncommon abbreviations should be avoided, but if essential they must be defined at their first mention in the Abstract itself.
Keywords. Immediately after the abstract, provide a maximum of five keywords, using American spelling and avoiding general and plural terms and multiple concepts (avoid, for example, 'and', 'of'). Be sparing with abbreviations: only abbreviations firmly established in the field may be eligible. These keywords will be used for indexing purposes.
Abbreviations. Define abbreviations which are not standard in this field at their first occurrence in the article: in the Abstract but also in the main text after it. Ensure consistency of abbreviations throughout the article. Be sparing with abbreviations: only abbreviations firmly established in the field may be eligible. These keywords will be used for indexing purposes.
N.B. Acknowledgements. Collate acknowledgements in a separate section at the end of the article and do not, therefore, include them on the title page, as a footnote to the title or otherwise.
Arrangement of the article
Subdivision of the article. After the abstract, divide your article into clearly defined and numbered sections. Subsections should be numbered 1.1 (then 1.1.1, 1.1.2, ?), 1.2, etc. (the abstract is not included in section numbering). Use this numbering also for internal cross-referencing: do not just refer to 'the text.' Any subsection may be given a brief heading. It is not necessary to underline or italicize such a heading, but it should appear on its own separate line.
Introduction. State the objectives of the work and provide an adequate background, avoiding a detailed literature survey or a summary of the results.
References. See separate section, below.
Figure legends, tables, figures, schemes. Present these, in this order, at the end of the article. They are described in more detail below. If you are working with LaTeX and have such features embedded in the text, these can be left, but such embedding should not be done specifically for publishing purposes. Further, high-resolution graphics files must be provided separately (see Preparation of illustrations).
Specific remarks
Mathematical formulae. Present simple formulae in the line of normal text where possible. In principle variables are to be presented in italics. Use the solidus (/) instead of a horizontal line,
e.g., Xp/Ym rather than
Xp
-
Ym
Powers of e are often more conveniently denoted by exp.
Number consecutively any equations which have to be displayed separate from the text (if referred to explicitly in the text).
Footnotes. Footnotes should be used sparingly. Number them consecutively throughout the article, using superscript Arabic numbers. Many wordprocessors build footnotes into the text, and this feature may be used. Should this not be the case, indicate the position of footnotes in the text and present the footnotes themselves on a separate sheet at the end of the article. Do not include footnotes in the Reference list. Table footnotes. Indicate each footnote in a table with a superscript lowercase letter.
Tables. Number tables consecutively in accordance with their appearance in the text. Place footnotes to tables below the table body and indicate them with superscript lowercase letters. Avoid vertical rules. Be sparing in the use of tables and ensure that the data presented in tables do not duplicate results described elsewhere in the article.
References
Responsibility for the accuracy of bibliographic citations lies entirely with the authors.
Citations in the text: Please ensure that every reference cited in the text is also present in the reference list (and vice versa). Any references cited in the Abstract must be given in full. Unpublished results and personal communications should not be in the reference list, but may be mentioned in the text. Citation of a reference as 'in press' implies that the item has been accepted for publication.
Citing and listing of web references. As a minimum, the full URL should be given. Any further information, if known (author names, dates, reference to a source publication, etc.), should also be given. Web references can be listed separately (e.g., after the reference list) under a different heading if desired, or can be included in the reference list.
Text: Indicate references by number(s) in square brackets in line with the text. The actual authors can be referred to, but the reference number(s) must always be given.
Example: "..... as demonstrated [3,6]. Barnaby and Jones [8] obtained a different result ...." List: The list of references is arranged alphabetically and then numbered (numbers in square brackets).
Examples:
Reference to a journal publication:
[1] J. van der Geer, J.A.J. Hanraads, R.A. Lupton, The art of writing a scientific article, J. Sci. Commun. 163 (2000) 51-59.
Reference to a book:
[2] W. Strunk Jr., E.B. White, The Elements of Style, third ed., Macmillan, New York, 1979.
Reference to a chapter in an edited book:
[3] G.R. Mettam, L.B. Adams, How to prepare an electronic version of your article, in: B.S. Jones, R.Z. Smith (Eds.), Introduction to the Electronic Age, E-Publishing Inc., New York, 1999, pp. 281-304.
Preparation of illustrations
General
Number illustrations consecutively in the order in which they are referred to in the text. They should accompany the manuscript, but should not be included within the text.
See also the section on Preparation of electronic illustrations below.
Mark the appropriate position of a figure in the article.
Captions
Ensure that each illustration has a caption. Supply captions on a separate sheet, not attached to the figure. A caption should comprise a brief title (not on the figure itself) and a description of the illustration. Keep text in the illustrations themselves to a minimum but explain all symbols and abbreviations used.
Preparation of electronic illustrations
Submitting your artwork in an electronic format helps us to produce your work to the best possible standards, ensuring accuracy, clarity and a high level of detail.
General points
- Always supply high-quality printouts of your artwork, in case conversion of the electronic artwork is problematic.
- Make sure you use uniform lettering and sizing of your original artwork, where possible.
- Save text in illustrations as "graphics" or enclose the font.
- Number the illustrations according to their sequence in the text.
- Use a logical naming convention for your artwork files, and supply a separate listing of the files and the software used.
- Provide all illustrations as separate files and as hardcopy printouts on separate sheets.
- Provide captions to illustrations separately.
- Produce images near to the desired size of the printed version.
A detailed guide on electronic artwork is available on our website:
http://authors.elsevier.com/ArtworkInstructions.html?dc=AI1
You are urged to visit this site; some excerpts from the detailed information are given here.
Formats
Suggested drawing/image applications for your graphics are Adobe PhotoShop, Adobe Illustrator, CorelDraw and Freehand. (Note the resolution requirements for line drawings, halftones, and line/halftone combinations as given below.) If you are using other applications, please convert the drawing or graphic images to one of the following formats:
EPS: Vector drawings. Embed the font.
TIFF: Colour or greyscale photographs (halftones): always use 300 dpi. For colour images always use CMYK.
TIFF: Bitmapped line drawings: use 1000 dpi.
TIFF: Combinations bitmapped line/half-tone: a minimum of 500 dpi is required.
Scan your colour illustrations at 300 dpi (500 dpi for colour line/halftone combinations). With CMYK electronic files include a 4-colour machine or cromalin proof and check that all the separations (if provided) are colour-coded. Produce computer-generated graphics in greyscale if they are to be published in black and white.
Please do not:
- Supply embedded graphics in your wordprocessor (spreadsheet, presentation) document;
- Supply files that are optimised for screen use (like GIF, BMP, PICT, WPG); the resolution is too low
- Supply files that are too low in resolution
- Submit graphics that are disproportionately large for the content.
Proofs
When the Publisher receives your manuscript, it is considered to be in its final form. Proofs are not to be regarded as 'drafts'.
One set of page proofs in PDF format will be sent to the corresponding author, to be checked for typesetting/editing. No changes in, or additions to, the accepted (and subsequently edited) manuscript will be allowed at this stage. Proofreading is solely your responsibility.
A form with queries from the copyeditor may accompany your proofs. Please answer all queries and make any corrections or additions required.
The Publisher reserves the right to proceed with publication if corrections are not communicated Return corrections within 7days of receipt of the proofs. Should there be no corrections, please confirm this.
Submission checklist
It is hoped that this list will be useful during the final checking of an article prior to sending it to the journal's editor for review. Please consult this Guide for Authors for further details of any item. Ensure that the following items are present:
- One author designated as corresponding author:
E-mail address
Full postal address
Telephone and fax numbers
- Electronic file in good order
file name(s)
media format (e.g., PC, Mac)
file format (e.g., Word, LaTeX) All text pages
Keywords
Original artwork (high-quality prints)
All figure captions
All tables (including title, description, footnotes)
Further considerations
- Manuscript has been "spellchecked"
- References are in the correct format for this journal
- All references mentioned in the Reference list are quoted in the text, and vice versa
- Permission has been obtained for use of copyrighted material from other sources (including the Web)
Colour figures clearly marked as being intended for colour reproduction or to be reproduced in black-and-white
Editorial Board
Editor-in-Chief:
A.C. Eringen, 15 Red Tail Drive, Littleton, CO 80126-5001, USA
Associate Editors:
E.S. Suhubi, Yeditepe University, Department of Mathematics, Faculty of Arts and Science, 26 Agustos Yerlesimi, Kayisdagi Caddesi 81120, Kayisdagi, Erenkoy, Istanbul, Turkey
S. -A. Zhou, Langsjohojden 45, S-125 51 Alvsjo-Stockholm, Sweden
Editorial Board:
G. Ahmadi, Department of Mechanical and Aeronautical Engineering, P.O. Box 5725, Clarkson University, NY 13699-5725, USA
S.A. Berger, College of Engineering, University of California at Berkeley, Berkeley, CA 94720, USA
B.A. Bilby, Mechanical Engineering Department, Sheffield University, Mappin Street, Sheffield S1 3JD, UK
J. Casey, Department of Mechanical Engineering, 6189 Etcheverry Hall #1740, University of California at Berkeley, Berkeley, CA 94720-1740, USA
T. Chang, Center for Space Research, Center for Theoretical Geo/Cosmo, Plasma Physics, Room 37-261, Massachusetts Institute of Technology, Cambridge, MA 02139, USA
L. Debnath, Department of Mathematics, University of Texas - Pan American, Edinburg, TX, USA
H. Demiray, Faculty of Sciences, Technical University of Istanbul, 80626 Maslak, Istanbul, Turkey
P. Durbin, Mechanical Engineering Department, Stanford University, Bldg. 500, Stanford, CA 94305-3030, USA
J.D. Goddard, Dept of Applied Mechanics and Engineering Sciences, University of California at San Diego, 9500 Gilman Drive, Dept 0411, La Jolla, CA 92093-0411, USA
J. Hutchinson, Division of Engineering and Applied Physics, Harvard University, Cambridge, MA 02138, USA
D. Iesan, Department of Mathematics, A1.I. Cuza University, 6600 Iasi, Romania
K. T. Jacob, Department of Metallurgy, Indian Institute of Science, Bangalore, India
A.D. Kirwan, Jr, The Graduate College of Marine Studies, Robinson Hall, University of Delaware, Newark, DE 19716-3501, USA
J. Lee, Department of Mechanical and Aerospace Engineering, George Washington University, 801 22nd Street, NW, Suite 739, Washington, DC 20052, USA
G. Lukaszewicz, Warsaw University, Institute of Applied Mathematics and Mechanics, ul. Banacha 2, 02-097 Warsaw, Poland
N. V. Madhusudana, Raman Research Institute, C. V. Raman Avenue, Sadashivanagar, Bangalore - 560 080, India
S. Minagawa, Sakuradai 1-33-9, Nerima-Ku, Tokyo 176, Japan
T. Mura, Department of Civil Engineering, Northwestern University, 619 Clark Street, Evanston, IL 60201, USA
M.N.L. Narasimhan, 10455 SW 152nd Avenue, Beaverton, OR, 97007, USA
D.F. Nelson, Department of Physics, Worcester Polytechnic Institute, 100 Institute Road, 01609-2280 Worchester, MA, USA
J.T. Oden, Department of Aersopace Engineering and Engineering Mechanics, The University of Texas at Austin, TX, USA
R.W. Ogden, Department of Mathematics, Glasgow University, Glasgow G12 8QQ, UK
Z. Olesiak, Dept of Applied Mathematics and Mechanics, University of Warsaw, S Banach Str 2, 02-097 Warsaw, Poland
K.R. Rajagopal, Department of Mechanical Engineering, Texas A and M University, Engineering Physics Building, Room 208, College Station, TX 77843, USA
A. Romano, Dipartimento di Matematica e Applicazioni "Renato Caccioppoli", Universita degli Studi de Napoli Federico, via Claudio 21, 80125 Napoli, Naples, Italy
G.F. Smith, 2120 Sycamore Street, Bethlehem, PA 18017-5120, USA
E. So¨®s, Universitatae Bucaresti, Facultatae Matematica, Institute Central Mat, Str Academiei NR14, Bucharest, Hungary
I. Stakgold, Department of Mathematics, Delaware University, Newark, DE 19711, USA
E.S. Suhubi, Istanbul Teknik Universitesi, Fen-Edebiyat Fakultesi, Muhendislik Bilimleri Bolumu, 80626 Maslak, Istanbul, Turkey
C. Wei-Zang, Shanghai University of Technology, Yan-Chang Road, Shanghai, PRC
|
刊名字顺( Alphabetical List of Journals):
返回页首 