期刊名称：ENVIRONMENTAL GEOCHEMISTRY AND HEALTH
 期刊简介(About the journal)
投稿须知(Instructions to Authors)
编辑部信息(Editorial Board)
About the journal
Environmental Geochemistry and Health publishes original research papers, research notes and reviews across the broad field of environmental geochemistry. Environmental geochemistry establishes and explains links between the chemical composition of rocks and minerals and the health of plants, animals and people. Beneficial elements regulate or promote enzymatic and hormonal activity whereas other elements may be toxic. Bedrock geochemistry controls the composition of soil and hence that of water and vegetation. Pollution, arising from the extraction and use of mineral resources distorts natural geochemical systems. Geochemical surveys of soil, water and plants show how major and trace elements are distributed geographically. Associated epidemiological studies reveal the possibility of causal links between the geochemical environment and disease. Experimental research illuminates the nature or consequences of natural geochemical processes.
High quality research papers or reviews dealing with any aspect of environmental geochemistry are welcomed. Submission of papers which directly link health and the environment are particularly encouraged. Papers may be theoretical, interpretative or experimental.
Instructions to Authors
Kluwer Academic Publishers request the submission of manuscripts and figures in electronic form in addition to a hard-copy printout. The preferred storage medium for your electronic manuscript is a 3 1/2 inch diskette. Please label your diskette properly, giving exact details on the name(s) of the file(s), the operating system and software used. Always save your electronic manuscript in the word processor format that you use; conversions to other formats and versions tend to be imperfect. In general, use as few formatting codes as possible. For safety?/SPAN>s sake, you should always retain a backup copy of your file(s). After acceptance, please make absolutely sure that you send the latest (i.e., revised) version of your manuscript, both as hard-copy printout and on diskette (submission in electronic form of the final version of your article is compulsory).
Kluwer Academic Publishers prefer articles submitted in word processing packages such as MS Word, WordPerfect, etc. running under operating systems MS DOS, Windows and Apple Macintosh, or in the file format LaTeX. Articles submitted in other software programs can also be accepted.
For submission in LaTeX, Kluwer Academic Publishers have developed Kluwer LaTeX class file, which can be downloaded from: http://www.wkap.nl/authors/jrnlstylefiles/
Use of this class file is highly recommended. Do not use versions downloaded from other sites. Technical support is available at: texhelp@wkap.nl. If you are not familiar with TeX/LaTeX, the class file will be of no use to you. In that case, submit your article in a common word processor format.
For the purpose of reviewing, articles for publication should be submitted as hard-copy printout (four-fold) and on diskette to:
The Journals Editorial Office
Environmental Geochemistry and Health
Kluwer Academic Publishers
P.O. Box 17
3300 AA Dordrecht
The Netherlands
Fax: +31 78 6576555
Manuscript presentation
The journal?/SPAN>s language is English. British English or American English spelling and terminology may be used, but either one should be followed consistently throughout the article. Manuscripts should be printed or typewritten on A4 or US Letter bond paper, one side only, leaving adequate margins on all sides to allow reviewers?/SPAN> remarks. Please double-space all material, including notes and references. Quotations of more than 40 words should be set off clearly, either by indenting the left-hand margin or by using a smaller typeface. Use double quotation marks for direct quotations and single quotation marks for quotations within quotations and for words or phrases used in a special sense.
Number the pages consecutively with the first page containing:
running head (shortened title)
article type (review, short communication, book review)
title
author(s)
affiliation(s)
full address for correspondence, including telephone and fax number and e-mail address
Abstract
Please provide a short abstract of 100 to 250 words. The abstract should not contain any undefined abbreviations or unspecified references.
Key words
Please provide 5 to 10 key words or short phrases in alphabetical order.
Abbreviations
Abbreviations should be explained at first occurrence.
Figures and tables
Submission and electronic figures
In addition to hard-copy printouts of figures, authors are requested to supply the electronic versions of figures in either Encapsulated PostScript (EPS) or TIFF format. Many other formats, e.g., Microsoft Postscript, PiCT (Macintosh) and WMF (Windows), cannot be used and the hard copy will be scanned instead.
Figures should be saved in separate files without their captions, which should be included with the text of the article. Files should be named according to DOS conventions, e.g., ?/SPAN>figure1.eps?/SPAN>. For vector graphics, EPS is the preferred format. Lines should not be thinner than 0.25pts and in-fill patterns and screens should have a density of at least 10%. Font-related problems can be avoided by using standard fonts such as Times Roman and Helvetica. For bitmapped graphics, TIFF is the preferred format but EPS is also acceptable. The following resolutions are optimal: black-and-white line figures - 600 - 1200 dpi; line figures with some grey or coloured lines - 600 dpi; photographs - 300 dpi; screen dumps-leave as is. Higher resolutions will not improve output quality but will only increase file size, which may cause problems with printing; lower resolutions may compromise output quality. Please try to provide artwork that approximately fits within the typeset area of the journal. Especially screened originals, i.e. originals with grey areas, may suffer badly from reduction by more than 10-15%.
Avoiding problems with EPS graphics
Please always check whether the figures print correctly to a PostScript printer in a reasonable amount of time. If they do not, simplify your figures or use a different graphics program.
If EPS export does not produce acceptable output, try to create an EPS file with the printer driver (see below). This option is unavailable with the Microsoft driver for Windows NT, so if you run Windows NT, get the Adobe driver from the Adobe site (www.adobe.com).
If EPS export is not an option, e.g., because you rely on OLE and cannot create separate files for your graphics, it may help us if you simply provide a PostScript dump of the entire document.
How to set up for EPS and postscript dumps under windows
Create a printer entry specifically for this purpose: install the printer ?/SPAN>Apple Laserwriter Plus?/SPAN> and specify ?/SPAN>FILE?/SPAN>: as printer port. Each time you send something to the ?/SPAN>printer?/SPAN> you will be asked for a filename. This file will be the EPS file or PostScript dump that we can use.
The EPS export option can be found under the PostScript tab. EPS export should be used only for single-page documents. For printing a document of several pages, select ?/SPAN>Optimise for portability?/SPAN> instead. The option ?/SPAN>Download header with each job?/SPAN> should be checked.
Submission of hard-copy figures
If no electronic versions of figures are available, submit only high-quality artwork that can be reproduced as is, i.e., without any part having to be redrawn or re-typeset. The letter size of any text in the figures must be large enough to allow for reduction. Photographs should be in black-and-white on glossy paper. If a figure contains colour, make absolutely clear whether it should be printed in black-and-white or in colour. Figures that are to be printed in black-and-white should not be submitted in colour. Authors will be charged for reproducing figures in colour.
Each figure and table should be numbered and mentioned in the text. The approximate position of figures and tables should be indicated in the margin of the manuscript. On the reverse side of each figure, the name of the (first) author and the figure number should be written in pencil; the top of the figure should be clearly indicated. Figures and tables should be placed at the end of the manuscript following the Reference section. Each figure and table should be accompanied by an explanatory legend. The figure legends should be grouped and placed on a separate page. Figures are not returned to the author unless specifically requested.
In tables, footnotes are preferable to long explanatory material in either the heading or body of the table. Such explanatory footnotes, identified by superscript letters, should be placed immediately below the table.
Section headings
Section headings should be numbered (e.g., 1., 1.1, 1.1.1, 2., 2.1, etc.).
Appendices
Supplementary material should be collected in an Appendix and placed before the Notes and Reference sections.
Notes
Footnotes should be avoided, but if unavoidable, please use footnotes rather than endnotes. Notes should be indicated by one upto three superscript asterixes in the text and listed at the end of the article before the References. A source reference note should be indicated by means of a superscript ‘‘#‘‘ after the title. This note should be placed at the bottom of the first page.
Cross-referencing
In the text, a reference identified by means of an author?/SPAN>s name should be followed by the date of the reference in parentheses and page number(s) where appropriate. When there are more than two authors, only the first author?/SPAN>s name should be mentioned, followed by et al.. In the event that an author cited has had two or more works published during the same year, the reference, both in the text and in the reference list, should be identified by a lower case letter like ‘‘a‘‘ and ‘‘b‘‘ after the date to distinguish the works.
Examples
Winograd (1986, p. 204)
(Winograd 1986a, b)
(Winograd 1986; Flores et al. 1988)
(Bullen and Bennett 1990)
Acknowledgements
Acknowledgements of people, grants, funds, etc. should be placed in a separate section before the References.
References
References to books, journal articles, articles in collections and conference or workshop proceedings, and technical reports should be listed at the end of the article in alphabetical order (see examples below). Articles in preparation or articles submitted for publication, unpublished observations, personal communications, etc. should not be included in the reference list but should only be mentioned in the article text (e.g., T. Moore, personal communication).
References to books should include the author?/SPAN>s name; year of publication; title; page numbers where appropriate; publisher; place of publication, in the order given in the example below.
Clayton, R.K.: 1980, Photosynthesis: Physical Mechanisms and Chemical Patterns. Cambridge University Press, Cambridge. 100 pp.
References to articles in an edited collection should include the author?/SPAN>s name; year of publication; article title; article title; editor?/SPAN>s name; title of collection; first and last page numbers; publisher; place of publication., in the order given in the example below.
Ritchie, G.S.P.: 1989, The chemical behaviour of aluminium, hydrogen and manganese in acid soils. In: A.D. Robson (ed.) Soil Acidity and Plant Growth. Academic Press, Sydney. pp. 1-60.
References to articles in conference proceedings should include the author?/SPAN>s name; year of publication; article title; editor?/SPAN>s name (if any); title of proceedings; first and last page numbers; place and date of conference; publisher and/or organization from which the proceedings can be obtained; place of publication, in the order given in the example below.
Boyle, D.R.: 1992, Effects of base exchange softening of fluoride uptake in groundwaters of the Moncton Sub-Basin, New Brunswick, Canada. In: Y.K. Kharaka and A.S. Maest (eds). Proceedings of the 7th International Symposium on Water-Rock Interaction. Park City, Utah. A.A. Balkema, Rotterdam, the Netherlands. pp.771-774.
References to articles in periodicals should include the author?/SPAN>s name; year of publication; article title; full title of periodical; volume number (issue number where appropriate); first and last page numbers, in the order given in the example below.
Robertson, F.N.: 1989, Arsenic in ground-water under oxydizing conditions, South-West United States. Environmental Geochemistry and Health 11, 171-185.
References to technical reports or doctoral dissertations should include the author?/SPAN>s name; year of publication; title of report or dissertation; institution; location of institution, in the order given in the example below.
Bright, D.A.: 1989, Electrode response to the As(V)/As(III) redox couple and the use of arsenic speciation as an indicator of redox conditions in natural water systems. Msc Thesis, University of Colorado.
Proofs
Proofs will be sent to the corresponding author by e-mail (if no e-mail address is available or appears to be out of order, proofs will be sent by regular mail).
Your response, with or without corrections, should be sent within 72 hours. Please do not make any corrections to the PDF file.
Minor corrections (+/- 10) should be sent as an e-mail attachment to: proofscorrection@wkap.nl. Always quote the four-letter journal code and article number and the PIPS No. from your proof in the subject field of your e-mail.
Extensive corrections must be clearly marked on a printout of the PDF file and should be sent by first-class mail (airmail overseas).
Offprints
Twenty-five offprints of each article will be provided free of charge. Additional offprints (both hard copies and PDF files) can be ordered by means of an offprint order form supplied with the proofs.
Page charges and colour figures
No page charges are levied on authors or their institutions. Colour figures are published at the author?/SPAN>s expense only.
Copyright
Authors will be asked, upon acceptance of an article, to transfer copyright of the article to the Publisher. This will ensure the widest possible dissemination of information under copyright laws.
Permissions
It is the responsibility of the author to obtain written permission for a quotation from unpublished material, or for all quotations in excess of 250 words in one extract or 500 words in total from any work still in copyright, and for the reprinting of figures, tables or poems from unpublished or copyrighted material.
Additional information
Additional information can be obtained from:
Kluwer Academic Publishers
Environmental Geochemistry and Health
P.O. Box 17
3300 AA Dordrecht
The Netherlands
Phone: +31 78 6576203
Fax: +31 78 6576254
Editorial Board
Editor-in-Chief:
Brian E. Davies
Dept. of Geological Sciences, Clemson University, SC, USA
Ming H. Wong
Institute for Natural Resources and Environmental Management, Hong Kong Baptist University, PR of China
Editorial Board:
D.C. Adriano, University of Georgia, Aiken, SC, USA; J. Albaiges, CID-CSIC, Barcelona, Spain; H. Bouwman, Potchefstroom University for Christian Higher Education, South Africa; N.M. Dickinson, Liverpool John Moores University, UK; J.G. Farmer, University of Edinburgh, UK; I. Holoubek, Masaryk University, Brno, Czech Republic; A. Kabata-Pendias, Institute of Soil Science and Cultivation of Plants, Pulawy, Poland; Kyoung-Woong Kim, Kwangju Institute of Science and Technology, South Korea; G.C. Lalor, University of the West Indies, Mona, Jamaica; N.W. Lepp, The John Moores University of Liverpool, UK; Xiang-Dong Li, Hong Kong Polytechnic University, PR of China; R.G. McLaren, Lincoln University, Canterbury, New Zealand; A. Mehra, University of Derby, UK; H.M. Mielke, Xavier University of Louisiana, New Orleans, USA; R. Naidu, University of South Australia, Mawson Lakes, Australia; P.J. Peterson, King's College London, UK; W.J. Pories, East Carolina University, Greenville, NC, USA; N.S. Suttle, Moredun Research Institute, Midlothian, UK; S. Tanabe, Ehime University, Matsuyama, Japan; I. Thornton, Imperial College, London, UK; Shu Tao, Peking University, PR of China; F. Wania, University of Toronto at Scarborough, ON, Canada; B.G. Wixson, Springfield, MO, USA; Wen-Xiong Wang, Hong Kong University of Science and Technology, PR of China
| 
刊名字顺( Alphabetical List of Journals):
返回页首 