期刊名称：ENVIRONMENTAL AND EXPERIMENTAL BOTANY
 期刊简介(About the journal)
投稿须知(Instructions to Authors)
编辑部信息(Editorial Board)
About the journal
|
Environmental and Experimental Botany publishes research papers on the physical, chemical and biological mechanisms and processes that relate the performance of plants to their abiotic and biotic environment. The experimental approaches should compare structural, physiological and/or ecological responses of genotypes, ecotypes, cultivars and/or ecological responses of genotypes, ecotypes, cultivars and/or assemblages of species.
Areas covered by the journal include:
(1) Plant/soil interactions in the range of chemical and physical soil diversity;
(2) Plant/water interactions concerning quality and quantity of water supply;
(3) responses of plants to radiation ranging from UV-B to infrared;
(4) plant/atmosphere relations, especially changing amospheric chemistry;
(5) plant/plant, plant/microorganism, and/or plant/animal interactions emphasising the role of secondary metabolites, and
(6) new methods for experimental approaches.
Each submitted manuscript should be based on an explicitly elaborated mechanical hypothesis.
In addition to research papers, the journal includes review articles commissioned by the Editors-in-Chief or submitted by authors. |
|
Instructions to Authors
Each submitted manuscript should be based on an explicitly elaborated mechanical hypothesis.
In addition to research papers, the journal offers review articles commissioned by the Editors-in-Chief or submitted by authors.
Submission of manuscripts
Papers for consideration should be submitted to:
Editor-in-Chief for Europe, Asia, and Africa:
The appointment of a new Editor-in-Chief for for Europe, Asia, and Africa is pending. For the time being, please send manuscripts to:
Marie-France Laforge
ENVIRONMENTAL AND EXPERIMENTAL BOTANY
Tour 53 - Case 153
Universite Pierre et Marie Curie
4, place Jussieu
75252 Paris cedex 05, France
Editor-in-Chief for the Americas and Australia:
Dr S.R. Pezeshki
Department of Biology
The University of Memphis
Memphis, TN 38152
USA
Submission of an article is understood to imply that the article is original and is not being considered for publication elsewhere. Authors have to submit a written statement that the manuscript is not submitted to another journal. Without this statement a manuscript will not be reviewed. Submission also implies that all authors have approved the paper for release and are in agreement with its content. Upon acceptance of the article by the journal, the author(s) will be asked to transfer the copyright of the article to the publisher. This transfer will ensure the widest possible dissemination of information.
For the initial submission of manuscripts, three (3) hardcopies are required. Do not send a disk copy at that time. Be very careful to follow the style for headings, references, key words and other matters as seen in a recent issue of the journal. Please supply telephone and fax numbers and E-mail addresses if available.
A copy of the manuscript on disk is required for all articles accepted for publication. After acceptance, the author will be asked to submit a disk.
Types of contribution
1. Original full papers (Regular Papers)
2. Review articles
Original papers should report the results of original research. The material should not have been previously published elsewhere, except in a preliminary form.
Reviews should cover a part of the subject of active current interest and should be very condensed. They are written on invitation or after initial contact with one of the Editors-in-Chief.
Enquiries
Authors can also keep a track on the progress of their accepted article, and set up e-mail alerts informing them of changes to their manuscript's status, by using the "Track a Paper" feature of Elsevier's Author Gateway http://authors.elsevier.com. For privacy, information on each article is password-protected. The author should key in the "Our Reference" code (which is in the letter of acknowledgement sent by the publisher on receipt of the accepted article) and the name of the corresponding author. In case of problems or questions, authors may contact the Author Service Department, E-mail: authorsupport@elsevier.com.
Electronic manuscripts
Electronic manuscripts have the advantage that there is no need for rekeying of text, thereby avoiding the possibility of introducing errors and resulting in reliable and fast delivery of proofs.
For the initial submission of manuscripts for consideration, hardcopies are sufficient. Elsevier is now publishing all manuscripts using electronic production methods, and therefore needs to receive the electronic files of your article with two hardcopies of the accepted version. Electronic files can be submitted on floppy disks, ZIP/JAZ disks, or CD ROMs.
To ensure fast and easy processing of disk submissions, please use the following guidelines:
1. It is important that the file saved is in the native format of the wordprocessor program used.
2. Name your files using the correct extension, eg. Fig1.cdr, tbl1-6.xls, text.doc, fig1a.eps, fig1.tif, etc.
3. Save text and graphics as separate files.
4. Label all disks with your name, journal to be published in, and filenames. Please also include details of the word-processing software, compression software, and platform (PC, Mac, UNIX etc) used in the creation of your files.
5. Ensure that electronic and hardcopy versions of your manuscript are identical. In cases of a discrepancy, the hardcopy version will be used as the definitive version by the production team.
We can accept most word-processing formats (ideally Microsoft Word or WordPerfect). Most formatting codes will be removed or replaced on processing your article so there is no need for you to use excessive layout styling. In addition, do not use options such as automatic word breaking, justified layout, double columns or automatic paragraph numbering (especially for numbered references). However do use bold face, italic, subscripts, superscripts etc. When preparing tables, if you are using a table grid, please use only one grid for each separate table and not a grid for each row. If no grid is being used, use tabs to align columns not spaces. Please follow this order when you create your manuscript: Title, Authors, Affiliations, Abstract, Keywords, Main text, Acknowledgements, Appendix, References, Vitae, Figure legends and then Tables. Do not import the Figures into the text file.
Preparation of manuscripts
1. Manuscripts should be written in English. Authors whose native language is not English are strongly advised to have their manuscripts checked by an English-speaking colleague prior to submission.
2. Submit the original and two copies of your manuscript. Enclose the original illustrations and two sets of photocopies (three prints of any photographs). The manuscript must be accompanied by a covering letter detailing what you are submitting (type of contribution, title, authors' names and affiliation, etc.). Please also indicate the author to whom we should address our correspondence in the case of multiple authors and include a contact address, telephone/fax numbers and e-mail address. Authors are requested to submit, with their manuscripts, the names and addresses of four potential referees.
3. Manuscripts should be typewritten, typed on one side of the paper, with wide margins and line spacing of 1.5 throughout, i.e. also for abstracts, footnotes and references. Every page of the manuscript, including the title page, references, tables, etc., should be numbered. However, in the text no reference should be made to page numbers; if necessary, one may refer to sections. Underline words that should be in italics, and do not underline any other words. Avoid excessive usage of italics to emphasize part of the text.
4. Manuscripts in general should be organized in the following order:
Title (should be clear, descriptive and not too long)
Name(s) of (co-)author(s)
Complete postal address(es) of affiliations
Full telephone, Fax No. and E-mail address of the corresponding author
Present address(es) of author(s) if applicable
Complete correspondence address and e-mail address to which the proofs should be sent as a footnote indicated with an asterisk
Abstract followed by keywords (indexing terms), normally 3-6 items
Introduction
Material studied, area descriptions, methods, techniques
Results
Discussion
Conclusion
Acknowledgments and any additional information concerning research grants, etc.
References
Tables
Figure captions
5. In typing the manuscript, titles and subtitles should not be run within the text. They should be typed on a separate line, without indentation. Use lower-case letter type. First and second order headings should be numbered.
6. SI units should be used.
7. If a special instruction to the copy editor or typesetter is written on the copy, it should be encircled. The typesetter will then know that the enclosed matter is not to be set in type. When a typewritten character may have more than one meaning (e.g., the lower case letter l may be confused with the numeral 1), a note should be inserted in a circle in the margin to make the meaning clear to the typesetter. If Greek letters or uncommon symbols are used in the manuscript, they should be written very clearly, and if necessary a note such as "Greek lower-case chi" should be put in the margin and encircled.
8. Elsevier reserves the privilege of returning to the author for revision accepted manuscripts and illustrations which are not in the proper form given in this guide.
9. Avoid new or uncommon acronyms. Use single letters (Greek, Roman, italic) for variables with subscripts as appropriate.
Authors in Japan please note:
Upon request, Elsevier Japan will provide authors with a list of people who can check and improve the English of their paper (before submission). Please contact our Tokyo office:
Elsevier Japan
9-15, Higashi-Azabu 1-chome
Minato-ku, Tokyo 106-0044
Japan
Tel:(+81) 3-5561-5032
Fax: (+81)3-5561-5045
E-mail: info@elsevier.co.jp
Abstracts
The abstract should be clear, descriptive and not longer than 400 words.
Tables
1. Authors should take notice of the limitations set by the size and lay-out of the journal. Large tables should be avoided. Reversing columns and rows will often reduce the dimensions of a table.
2. If many data are to be presented, an attempt should be made to divide them over two or more tables.
3. Drawn tables, from which blocks need to be made, should not be folded.
4. Tables should be numbered according to their sequence in the text. The text should include references to all tables.
5. Each table should be typewritten on a separate page of the manuscript. Tables should never be included in the text.
6. Each table should have a brief and self-explanatory title.
7. Column headings should be brief, but sufficiently explanatory. Standard abbreviations of units of measurement should be added between parentheses.
8. Vertical lines should not be used to separate columns. Leave some extra space between the columns instead.
9. Any explanation essential to the understanding of the table should be given as a footnote at the bottom of the table.
Illustrations
1. All illustrations (line drawings and photographs) should be submitted separately, unmounted and not folded. They should be camera ready. Proportion figure and tables to fit 75-mm or 160-mm column widths.
2. Illustrations should be numbered according to their sequence in the text. References should be made in the text to each illustration.
3. Each illustration should be identified on the reverse side (or - in the case of line drawings - on the lower front side) by its number and the name of the author. An indication of the top of the illustrations is required in photographs of profiles, thin sections, and other cases where doubt can arise.
4. Illustrations should be designed with the format of the page of the journal in mind. Illustrations should be of such a size as to allow a reduction of 50%.
5. Lettering should be in Indian ink or by printed labels. Make sure that the size of the lettering is big enough to allow a reduction of 50% without becoming illegible. The lettering should be in English. Use the same kind of lettering throughout and follow the style of the journal.
6. If a scale should be given, use bar scales on all illustrations instead of numerical scales that must be changed with reduction.
7. Each illustration should have a caption. The captions to all illustrations should be typed on a separate sheet of the manuscript.
8. Explanations should be given in the typewritten legend. Drawn text in the illustrations should be kept to a minimum.
9. Photographs are only acceptable if they have good contrast and intensity. Sharp and glossy copies are required. Reproductions of photographs already printed cannot be accepted.
10. Colour illustrations cannot usually be included, unless the cost of their reproduction is paid for by the author.
Free colour reproduction
If, together with your accepted article, you submit usable colour figures then Elsevier will ensure, at no additional charge, that these figures will appear in colour on the web (e.g., ScienceDirect and other sites) regardless of whether or not these illustrations are reproduced in colour in the printed version. For colour reproduction in print, you will receive information regarding the costs from Elsevier after receipt of your accepted article. For further information on the preparation of electronic artwork, please see http://www.elsevier.com/locate/authorartwork).
Please note: Because of technical complications which can arise by converting colour figures to 'grey scale' (for the printed version should you not opt for colour in print) please submit in addition usable black and white prints corresponding to all the colour illustrations.
Basic guidelines for submitting computer generated artwork/illustrations: (For in-depth information about submitting electronic artwork, please check http://authors.elsevier.com)
1. Computer-generated illustrations and halftones/line/tones (either colour or black & white) are acceptable. Since we cannot guarantee the usability of graphic files, original hardcopies of all illustrations must accompany the accepted printout of the manuscript in all cases.
2. TIFF or EPS files are the preferred format. Suggested packages for line graphics are Adobe Illustrator (version 3.0 or above), Freehand, and Corel Draw. Graphics made in WordPerfect or Word generally have too low a resolution. Files of scanned line graphics can be accepted preferably at a resolution of 1000 dpi, for scanned halftones (300 dpi) and scanned line/tones (500 dpi).
3. Black & white photos, micrographs etc should not be saved as colour.
4. Colour illustrations should be scanned in at 300 dpi (500 dpi for colour/line tones).
5. If the image files are large and you compress them prior to submission, please indicate the compression software used.
References
Note: Authors are strongly encouraged to check the accuracy of each reference against its original source.
1. All publications cited in the text should be presented in a list of references following the text of the manuscript. The manuscript should be carefully checked to ensure that the spelling of author's names and dates are exactly the same in the text as in the reference list.
2. In the text refer to the author's name (without initial) and year of publication, followed - if necessary - by a short reference to appropriate pages. Examples: "Since Peterson (1988) has shown that..." "This is in agreement with results obtained later (Kramer,1989, pp. 12-16)".
3. If reference is made in the text to a publication written by more than two authors the name of the first author should be used followed by "et al.". This indication, however, should never be used in the list of references. In this list names of first author and co-authors should be mentioned.
4. References cited together in the text should be arranged chronologically. The list of references should be arranged alphabetically on authors' names, and chronologically per author. If an author's name in the list is also mentioned with co-authors the following order should be used: publications of the single author, arranged according to publication dates -- publications of the same author with one co-author -- publications of the author with more than one co-author. Publications by the same author(s) in the same year should be listed as 1994a, 1994b, etc.
5. Use the following system for arranging your references, please note the proper position of the punctuation:
a. For periodicals
Chettri, M.K., Sawidis, T., Zachariadis, G.A., Stratis, J.A., 1997. Uptake of heavy metals by living and dead Cladonia thalli. Environ. Exp. Bot.37, 39-42.
b. For edited symposia, special issues, etc., published in a periodical
Rice, K., 1992. Theory and conceptual issues. In: Gall, G.A.E., Staton, M. (Eds.), Integrating Conservation Biology and Agricultural Production. Agriculture, Ecosystems and Environment 42, 9-26.
c. For books
Gaugh, Jr., H.G., 1992. Statistical Analysis of Regional Field Trials. Elsevier, Amsterdam.
d. For multi-author books
DeLacy, I.H., Cooper, M., Lawrence, P.K., 1990. Pattern analysis over years of regional variety trials: relationship among sites. In: Kang, M.S. (Ed.), Genotype by Environment Interaction and Plant Breeding. Louisiana State University, Baton Rouge, LA, pp. 189-213.
6. Abbreviate the titles of periodicals mentioned in the list of references according to the Bibliographic Guide for Editors & Authors (The Chemical Abstracts Service, The Ohio State University, Columbus, OH 43210, USA).
7. In the case of publications in any language other than English, the original title is to be retained. However, the titles of publications in non-Roman alphabets should be transliterated, and a notation such as "(in Russian)" or "(in Greek, with English abstract)" should be added.
8. Work accepted for publication but not yet published should be referred to as "in press".
9. References concerning unpublished data and "personal communications" should not be cited in the reference list but may be mentioned in the text.
Formulae
1. Formulae should be typewritten, if possible. Leave ample space around the formulae.
2. Subscripts and superscripts should be clear.
3. Greek letters and other non-Roman or handwritten symbols should be explained in the margin where they are first used. Take special care to show clearly the difference between zero (0) and the letter O, and between one (1) and the letter l.
4. Give the meaning of all symbols immediately after the equation in which they are first used.
5. For simple fractions use the solidus (/) instead of a horizontal line.
6. Equations should be numbered serially at the right-hand side in parentheses. In general only equations explicitly referred to in the text need be numbered.
7. The use of fractional powers instead of root signs is recommended. Also powers of e are often more conveniently denoted by exp.
8. Levels of statistical significance which can be mentioned without further explanation are *P <0.05, **P <0.01 and ***P <0.001.
9. In chemical formulae, valence of ions should be given as, e.g., Ca2+, not as Ca++.
10. Isotope numbers should precede the symbols, e.g., 18O.
11. The repeated writing of chemical formulae in the text is to be avoided where reasonably possible; instead, the name of the compound should be given in full. Exceptions may be made in the case of a very long name occurring very frequently or in the case of a compound being described as the end product of a gravimetric determination (e.g., phosphate as P2O5).
Footnotes
1. Footnotes should only be used if absolutely essential. In most cases it should be possible to incorporate the information in normal text.
2. If used, they should be numbered in the text, indicated by superscript numbers, and kept as short as possible.
Nomenclature
1. Authors and editors are, by general agreement, obliged to accept the rules governing biological nomenclature, as laid down in the International Code of Botanical Nomenclature, the International Code of Nomenclature of Bacteria, and the International Code of Zoological Nomenclature.
2. All biotica (crops, plants, insects, birds, mammals, etc.) should be identified by their scientific names when the English term is first used,with the exception of common domestic animals. The authority of a species should only be given in the Materials and Methods section.
3. All biocides and other organic compounds must be identified by their Geneva names when first used in the text. Active ingredients of all formulations should be likewise identified.
4. For chemical nomenclature, the conventions of the International Union of Pure and Applied Chemistry and the official recommendations of the IUPAC-IUB Combined Commission on Biochemical Nomenclature should be followed.
Copyright
1. An author, when quoting from someone else's work or when considering reproducing an illustration or table from a book or journal article, should make sure that he is not infringing a copyright.
2. Although in general an author may quote from other published works, he/she should obtain permission from the holder of the copyright if he wishes to make substantial extracts or to reproduce tables, plates, or other illustrations. If the copyright-holder is not the author of the quoted or reproduced material, it is recommended that the permission of the author should also be sought.
3. Material in unpublished letters and manuscripts is also protected and must not be published unless permission has been obtained.
4. A suitable acknowledgment of any borrowed material must always be made.
Obtaining Permissions
Please use our Permission Request Form on http://www.elsevier.com/locate/permission to request permission to reproduce material from books and journals published by Elsevier BV, Elsevier Ltd, Elsevier Inc, Elsevier SA, Elsevier Ireland Ltd, and the Pergamon, JAI and Ablex imprints.
Requests are handled by the Global Rights Department in Oxford, UK and are normally processed within 10 working days of receipt. However, every effort will be made to meet more immediate deadlines if indicated.
Alternatively you may send a written request to:
Global Rights Department
Elsevier
PO Box 800
Oxford OX5 1DX
UK
Tel: +44 1865 843830
Fax: +44 1865 853333 or +44 1865 843950
e-mail: permissions@elsevier.co.uk
Proofs
Proofs will be sent to the corresponding author as given on the title page of the manuscript. Usually proofs will be sent by email as a PDF file.
Only typesetter's errors may be corrected; no changes in, or additions to, the edited manuscript will be allowed.
Elsevier will do everything possible to get your article corrected and published as quickly and accurately as possible. Therefore, it is important to ensure that all of your corrections are sent back to us in one communication. Subsequent corrections will not be possible, so please ensure your first sending is complete.
Offprints
1. Twenty five offprints for regular papers and 100 offprints for reviews will be supplied free of charge.
2. Additional offprints can be ordered on an offprint order form, which is included with the proofs.
3. UNESCO coupons are acceptable in payment of extra offprints.
Environmental and Experimental Botany does not have page charges.
5 November 2002
Editorial Board
Editor-in-Chief for Rest of World:
The appointment of a new Editor--in-Chief for the Rest of the World is pending
Editor-in-Chief for the Americas and Australia:
S.R. Pezeshki, Department of Biology, The University of Memphis, Memphis, TN 38152, USA, Email: pezeshki@memphis.edu
| 
刊名字顺( Alphabetical List of Journals):
返回页首 