期刊名称:E&MJ-ENGINEERING AND MINING JOURNAL
ISSN: | 0095-8948
|
出版频率: | Irregular
|
出版社: | LOBOS SERVICES INC, 8751 E HAMPDEN AVE, STE B-1, DENVER, USA, CO, 80231
|
出版社网址: | http://www.e-mj.com
|
期刊网址: | http://www.e-mj.com/
|
影响因子: | 0.032 |
主题范畴: | MINING & MINERAL PROCESSING |
期刊简介(About the journal)
投稿须知(Instructions to Authors)
编辑部信息(Editorial Board)
About the journal
http://e-mj.com/ac/march_2003/index.htm
Engineering & Mining Journal has been the premier monthly, serving the international mining and metallurgical industry since 1866. Executives in 130 countries, who are explorationists, miners, or metallurgists, find E&MJ an indispensable aid to their daily efforts, be they for surface or underground exploitation, comminution, hydro- or pyro-metallurgy. E&MJ spans over four dozen metals and minerals in the universe of mining (metals/non-metallics/fuels)?from alumina to zinc, kaolin to phosphate, and coal to uranium. Every element of exploration—from satellites to geochemistry to drilling technology—is addressed. Mine development, and ancillary infrastructure, through operations is also dealt with. And the environment is not neglected, from pre-development efforts through mine closure and reclamation. Through technical excellence, i.e. engineers with decades of real-world experience (outside journalism), E&MJ strives to provide topical yet timeless information. Its content, unlike some futuristic academic curiosities covered in other publications, is immediately applicable for its readers. Besides staff-written material resulting from mine and mill visits, E&MJ draws on the extensive contacts of its editor for a wide spectrum of topics. E&MJ content contrasts with the content of some competitive magazines that either are solely based on press releases or recycled from manufacturer newsletters. Moreover it is the only monthly international mining publication that provides news (including exploration) as well as features, calendar, book, people, and product information.
Instructions to Authors
MECHANICAL REQUIREMENTS/PRINTING SPECIFICATIONS
PRINTING METHOD: Web offset with Publisher making plates at no cost. All forms printed wet: web offset.
DIGITAL AD SPECIFICATIONS: If an ad does not meet all of the requirements outlined below, a graphic alteration charge will be applied to the final bill. This charge is $60 per hour. Minimum charge is one hour. If the setup of your ad does NOT meet these requirements, please contact the Production Department immediately, +1 904.721.2925. All digital media should be sent to:
Mining Media c/o Production Department Regency Tower, Suite 1108 9950 Regency Square Blvd Jacksonville, FL 32225 USA
PLATFORMS: Mac or PC
MEDIA: CD-ROM
APPLICATIONS: Quark, Photoshop, Illustrator, Freehand, Print-quality PDF
PROOFS: For 4-color printing, furnish Matchprints or similar proofs. Furnish 1 set of proofs with insertion order. For B&W or simple two-color advertisements, your proofs may be bluelines or repros. Furnished off-press proofs must comply with S.W.O.P standards.
DISK CONTENTS: Either include a "Collect for Output" report or a detailed file list
FONTS: Adobe Type 1. Include BOTH screen & printer fonts on disk. No TrueType Fonts.
RESOLUTION: 300 dpi. Save all graphics as a .tiff or .eps file. Do not embed images into final layout file.
COLOR: CMYK breakdown. Ads needing conversion from RGB will be charged accordingly. Total ink saturation should not exceed 280%. Pantone colors must be paid for and clearly specified. If one is to be created out of process, clearly specify PMS number.
TRAPPING: Do not provide trapped files.
INKS: Standard S.W.O.P.; second colors and four-color process colors.
BINDING: Saddle Stitch
MATERIAL RELEASE: Material for which return instructions are not provided will be destroyed 12 months after use.
MAILING INSTRUCTIONS, INSERTION ORDERS, ETC.: Send all correspondence, contracts, insertion orders, insert samples, copy, ad transfer orders and proofs to:
Production Manager c/o Production Department Regency Tower, Suite 1108 9950 Regency Square Blvd Jacksonville, FL 32225 USA
Inserts All supplied Inserts must be approved by submitted sample no later than eight weeks prior to publication. Furnished Inserts should be shipped prepaid to:
Publication Name, Issue MM/YY (Coal Age, E&MJ, Equipo Minero, or Coal Age Int'l) c/o BANTA Publications 100 Banta Road Long Prairie, MN 56347-1903 USA
Name of advertiser, date of issue and shipper must appear on each carton, with quantity in each carton and total number of cartons. Promptly advise Mining Media of shipping or send a copy of manifest to:
Production Manager c/o Production Department Regency Tower, Suite 1108 9950 Regency Square Blvd Jacksonville, FL 32225 USA
Be sure to indicate issue date on each carton shipped.
INSERT SPECIFICATIONS One or two-page, back to back, furnish one up 8-1/8" x 11-1/8" 206 x 280mm Two-page spread or four-pages, furnish one up 16" x 11-1/8" 406 x 280mm Safety margin, each edge 3/8" 9mm Binding: Saddle Stitched, trim all 3 sides, Book trim size 7-7/8" x 10-3/4" 200 x 273mm Folding: Spread Inserts, furnish flat Paper stock 60 to 100 lbs., 25 x 38 - 500 basis. Anything over 100# must have publisher approval. Gatefold and special Inserts, contact Publisher for details
INSERT OVERWEIGHT CHARGES: Maximum weight and thickness without premium: 100 lb. enamel (25 x 38 ream weight) or 70 lb. offset book or their equivalent up to a calipered thickness of .006. Publisher will accept heavier, provided that an over-weight premium is paid as follows: 10% additional to the earned rate (including back-up charges, if any) for Inserts which weigh more than 100 lb. for a ream of 25 x 38 OR which caliper over .006 but not more than .008 per sheet; 20% additional for those calipering over .008 to .010. Maximum is.010. Trimming of over-sized Inserts will be charged at cost. Back-up and trimming charges are not commissionable.
NUMBER OF Inserts NEEDED: Contact your representative.
CLOSING DATE: At Mining Media office on first of preceding month. Enclose sample or dummy. Send three copies of finished piece.
FINAL DATE FOR DELIVERY: At BANTA on the 15th of preceding month.
WEIGHT OF STOCK AND INSERT OVERWEIGHT CHARGES: Maximum weight and thickness without premium: 100 lb. enamel (25 x 38 ream weight) or 70 lb. offset book or their equivalent up to a calipered thickness of .006. Publisher will accept heavier, provided that an overweight premium is paid as follows: 10% additional to the earned rate (including backup charges, if any) for Inserts which weigh more than 100 lb. for a ream of 25 x 38 OR which caliper over .006 but not more than .008 per sheet; 20% additional for those calipering over .008 to .010. 25% additional for those over .010. Maximum is .012. Trimming of oversized Inserts will be charged at cost. Backup and trimming charges are not commissionable. Publisher may accept specially folded or die-cut Inserts, but dummy must be submitted before printing.
INSERT RATES: Black and white earned page rate applies for each page of furnished Inserts. On one-page Inserts furnished printed one side of sheet only, coated stock, add $700 backup premium. Backup charge on spread Inserts is $1,060. Submit novelty Inserts for quotation and specifications. No insert price quotes are final until publisher receives samples of insert.
DISPLAY AD DIMENSIONS Advertisements exceeding type size in any dimension are considered oversize.
Size |
Width and Depth |
|
Full page |
7" x 10" |
(178 x 254 mm) |
2/3 page |
4-1/2" x 10" |
(114 x 254 mm) |
1/2 page (Isl) |
4-1/2" x 7-1/2" |
(114 x 191 mm) |
1/2 page (H) |
7" x 4-5/8" |
(178 x 117 mm) |
1/2 page (V) |
3-3/8" x 10" |
(86 x 254 mm) |
1/3 page (V) |
2-1/4" x 10" |
(57 x 254 mm) |
1/3 page (Sq) |
4-1/2" x 4-5/8" |
(114 x 117 mm) |
1/4 page (V) |
3-3/8" x 4-5/8" |
(86 x 117 mm) |
1/6 page (V) |
2-1/4" x 4-5/8" |
(57 x 117 mm) |
1/6 page (H) |
4-5/8" x 2-1/8" |
(117 x 54 mm) |
Type page size |
7" x 10" |
(178 x 254 mm) |
Book trim size |
7-7/8" x 10-3/4" |
(200 x 273mm) |
Type columns |
2 columns per page |
3-3/8" x 10" |
(86 x 254 mm) |
3 columns per page |
2-1/4" x 10" |
(57 x 254 mm) |
Bleed Dimensions |
Width and Depth |
|
Single page |
8-1/8" x 11-1/8" |
(206 x 280 mm) |
Spread |
16" x 11-1/8" |
(406 x 280 mm) |
2/3 page (V) |
5-1/16" x 11-1/8" |
(129 x 280 mm) |
ISSUANCE AND CLOSING DATES:
Refer to Media Kit or contact your salesperson for information about closing and issuance dates.
Cancellations
Cancellations accepted up to the time advertising Closes for any specific issue.
Editorial Board
http://www.primediabusiness.com/default.asp
Welcome to PRIMEDIA Business Magazines & Media, a targeted media company that connects sellers with qualified buyers. Through our more than 60 business-to-business publications, 130 Web sites, more than 75 e-mail newsletters, more than 25 trade shows, and more than 450 books and directories, we address the needs of professionals in 20 market sectors. Explore our site and learn more about how our diverse portfolio of properties can help you reach your target market
MAGAZINE STAFF
Ted . Worthington Bio Managing Editor E-mail: tworthington@primediabusiness.com
Jeannine Chandler Bio Sales Representative—CENTRAL USA & CANADA E-mail: jchandler@primediabusiness.com
Romano Ferrario Bio Sales Representative—ITALY E-mail: milano@ediconsult.com
Liz Justus Bio Sales Representative—WESTERN USA & CANADA E-mail: ljustus@primediabusiness.com
Akiyoshi Kojima Bio Sales Representative—JAPAN E-mail: kojima@media-jac.co.jp
Richard Levene Bio Sales Representative—BENELUX, DENMARK, FINLAND, FRANCE, NORWAY, PORTUGAL, SPAIN, SWEDEN, UK E-mail: rlevene@primediabusiness.com
Doug Lewis Bio Sales Representative—NORTH/SOUTHEASTERN USA & CANADA E-mail: dglewis@mindspring.com
Don Mahlmeister Bio Associate Publisher E-mail: dmahlmeister@primediabusiness.com
Anne Murray Bio Sales Representative—AUSTRALIA & NEW ZEALAND E-mail: wmn@accsoft.com.au
C.H. Park, President Bio Sales Representative—KOREA E-mail: femchp@unitel.co.kr
David Pistello Bio Sales Representative—Classified E-mail: dpistello@primediabusiness.com
Gunter Schneider Bio Sales Representative—AUSTRIA, GERMANY, SWITZERLAND E-mail: gsm-international@web.de
Ted . Worthington Bio Managing Editor E-mail: tworthington@primediabusiness.com
Jeannine Chandler Bio Sales Representative—CENTRAL USA & CANADA E-mail: jchandler@primediabusiness.com
Romano Ferrario Bio Sales Representative—ITALY E-mail: milano@ediconsult.com
Liz Justus Bio Sales Representative—WESTERN USA & CANADA E-mail: ljustus@primediabusiness.com
Akiyoshi Kojima Bio Sales Representative—JAPAN E-mail: kojima@media-jac.co.jp
Richard Levene Bio Sales Representative—BENELUX, DENMARK, FINLAND, FRANCE, NORWAY, PORTUGAL, SPAIN, SWEDEN, UK E-mail: rlevene@primediabusiness.com
Doug Lewis Bio Sales Representative—NORTH/SOUTHEASTERN USA & CANADA E-mail: dglewis@mindspring.com
Don Mahlmeister Bio Associate Publisher E-mail: dmahlmeister@primediabusiness.com
Anne Murray Bio Sales Representative—AUSTRALIA & NEW ZEALAND E-mail: wmn@accsoft.com.au
C.H. Park, President Bio Sales Representative—KOREA E-mail: femchp@unitel.co.kr
David Pistello Bio Sales Representative—Classified E-mail: dpistello@primediabusiness.com
Gunter Schneider Bio Sales Representative—AUSTRIA, GERMANY, SWITZERLAND E-mail: gsm-international@web.de
|