期刊名称：COMPOSITES SCIENCE AND TECHNOLOGY
 期刊简介(About the journal)
投稿须知(Instructions to Authors)
编辑部信息(Editorial Board)
About the journal
The journal Composites Science and Technology publishes refereed original articles on all aspects of the
fundamental and applied science of engineering composites. It is the function of this journal to bring together in one publication outstanding papers that encompass the complete range of composite materials, including biocomposites, foams, functional and smart composites, gradient and layered composites, nanocomposites, structural composites, eco-composites and composites mimicking natural materials. It deals with reinforcements ranging from nano- to micro- to meso- to macro-scale in metal, polymer, cementitious and ceramic matrices. The editors welcome theoretical and experimental papers dealing with multi-scale and multi-functional issues and properties of the new generation of composite materials. Articles addressing all aspects of composites research, from material processing, manufacturing, and performance characterization to analysis, design, simulations and modelling, are welcome. The journal particularly encourages an interdisciplinary approach to the study of composites.
Papers covering novel topics, extending the frontiers of the science and technology of composites, are encouraged. Reviews covering topics of major interest will be presented at regular intervals. Besides regular research papers and review papers, letters communicating significant research findings in a timely manner are also welcome. It is the aim of Composites Science and Technology to play an effective role in the rapid dissemination of research findings in the ever-evolving field of composite materials.
Instructions to Authors
Submission of Papers
Authors are requested to submit three copies of their original manuscript and figures to the Editor in their region.
Contributors in Asia and Australia may submit their papers to: Professor Yiu-Wing Mai, Centre for Advanced Materials Technology, School of Aerospace, Mechanical and Mechatronic Engineering, University of Sydney, Sydney, New South Wales 2006, Australia.
Contributors in Europe may submit their papers to: Professor Karl Schulte, Technical University Hamburg-Harburg, Polymers & Composites, Denickestrasse 15, D-21073 Hamburg, Germany.
Contributors in North America and all other areas should send their papers to the Editor-in-Chief: Professor Tsu-Wei Chou, Center for Composite Materials and Department of Mechanical Engineering, University of Delaware, Newark, Delaware 19711, USA.
All manuscripts are to be written in English. Papers essentially of an advertising nature will not be accepted.
Submission of a paper implies that it has not been published previously, that it is not under consideration for publication elsewhere, and that if accepted it will not be published elsewhere in the same form, in English or in any other language, without the written consent of the publisher.
Types of Contributions
Original papers, occasional review papers and letters, on all aspects of fundamental and applied science of engineering composites will be considered for publication. Concise articles which communicate new and important results, or letters to published articles, will be included in a short communication section, and will be published with the minimum of delay. Short communications should consist of no more than four manuscript pages. Authors may mail, fax or E-mail (if no figures are involved) such contributions to an Editor, with an accompanying brief statement indicating the specific reason for urgency.
Manuscript Preparation
The following conditions must be met, otherwise the manuscripts will be immediately returned to the authors for reformatting:
(i) three copies of the manuscript must be submitted;
(ii) text must be double line spaced and in single column format;
(iii) tables and figures must not be incorporated within the text, but should be appended on separate sheets.
General: Manuscripts must be typewritten, double-spaced with wide margins on one side of white paper. Good quality printouts with a font size of 12 or 10 pt are required. The corresponding author should be identified (include a Fax number and E-mail address). Full postal addresses must be given for all co-authors. Authors should consult a recent issue of the journal for style if possible. An electronic copy of the paper should accompany the final version. The Editors reserve the right to adjust style to certain standards of uniformity. Authors should retain a copy of their manuscript since we cannot accept responsibility for damage or loss of papers. Original manuscripts are discarded one month after publication unless the Publisher is asked to return original material after use. Papers will normally be published in order of acceptance by the Editor, although this may occasionally be changed for reasons of space, or to publish more quickly particular papers which the Editor considers of topical interest. The use of property names should be avoided as far as possible, but may be acceptable where, in the Editors opinion, the proprietary name is a universally known description of the material in question, eg Kevlar-49.
Abstracts: Each paper should be provided with an Abstract of about 100-150 words, reporting on the purpose and results of the paper and with five key words for use in indexing and by Abstract services.
Text: Follow this order when typing manuscripts: Title, Authors, Affiliations, Abstract, Keywords, Main text, Acknowledgements, Appendix, References, Figure Captions and then Tables. Do not import the Figures or Tables into your text. The corresponding author should be identified with an asterisk and footnote. All other footnotes should be avoided, but where necessary should be identified with superscript Arabic numbers (except for table footnotes).
Keywords: Authors should select a maximum of five keywords from the Keywords List at the end of these instructions. Each Keyword should be accompanied by the capital letter denoting the category from which the keyword has been selected. If authors wish they may nominate one keyword which is not included in the list below. The list of up to five keywords should appear on the title page of each paper submitted for consideration, following the abstract.
Units: The SI system should be used for all scientific and laboratory data, although values in other systems may be quoted in parentheses after the SI units if authors consider it necessary.
Symbols: Temperatures should be given in Celsius ( C) or Kelvin (K) scales. Abbreviations for units should follow the suggestions of the British Standards publication BS 1991. The full stop should not be included in abbreviations, eg m (not m.), ppm (not p.p.m.): '%' and '/' should be used in preference to 'per cent' and 'per'. Where abbreviations are likely to cause ambiguity or not be readily understood by an international readership, units should be put in full.
References: All publications cited in the text should be presented in a list of references following the text of the manuscript. In the text refer to references by a number in square brackets on the line (e.g. Since Wu [1]), and the full reference should be given in a numerical list at the end of the paper.
References should be given in the following form:
1. Wu W, Verpoest I, Varna J. A novel axisymmetric variational analysis of stress transfer into fibres through a partially debonded interface. Comp Sci Tech 1998;58(12):1863-1877.
2. Wakeman MD. Non-isothermal compression moulding of glass fibre reinforced polypropylene composites. PhD Thesis, University of Nottingham, Department of Mechanical Engineering, 1997.
3. Clemens S, Western E, Handermann A. Hybrid yarns for high-performance thermoplastic composites. In: Bossu Jd, Lissac P, editors. Looking ahead for materials and processes, vol. 1. Amsterdam: Elsevier, 1987.
4. Hogg P, Woolstencroft D. Non-crimp thermoplastic composite fabrics - aerospace solutions to automotive problems. Advanced Composite Materials: New Developments and Applications Conference Proceedings, Detroit, Michigan, USA: ASM International, 1991. p. 339-349.
Illustrations: All illustrations should be provided in camera-ready form, suitable for reproduction (which may include reduction) without retouching. Photographs, charts and diagrams are all to be referred to as "Figure(s)" and should be numbered consecutively in the order to which they are referred. They should accompany the manuscript, but should not be included within the text. All illustrations should be clearly marked on the back with the figure number and the author's name. All figures are to have a caption. Captions should be supplied on a separate sheet.
Line drawings: Good quality printouts on white paper produced in black ink are required. All lettering, graph lines and points on graphs should be sufficiently large and bold to permit reproduction when the diagram has been reduced to a size suitable for inclusion in the journal. Dye-line prints or photocopies are not suitable for reproduction. Do not use any type of shading on computer-generated illustrations.
Photographs: Original photographs must be supplied as they are to be reproduced (e.g. black and white or colour). If necessary, a scale should be marked on the photograph. Please note that photocopies of photographs are not acceptable.
Colour: Where colour figures are required the author will pay the costs of colour printing at the present colour printing rates.
Tables: Tables should be numbered consecutively and given a suitable caption and each table typed on a separate sheet. Footnotes to tables should be typed below the table and should be referred to by superscript lowercase letters. No vertical rules should be used. Tables should not duplicate results presented elsewhere in the manuscript, (e.g. in graphs).
Electronic submission
Authors should submit an electronic copy of their paper with the final version of the manuscript. The electronic copy should match the hardcopy exactly. Always keep a backup copy of the electronic file for reference and safety. Full details of electronic submission and formats can be obtained from http://authors.elsevier.com
Proofs
Proofs will be sent to the author (first named author if no corresponding author is identified of multi-authored papers) and should be returned within 48 hours of receipt. Corrections should be restricted to typesetting errors; any others may be charged to the author. Any queries should be answered in full. Please note that authors are urged to check their proofs carefully before return, since the inclusion of late corrections cannot be guaranteed. Proofs are to be returned to the Log-in Department, Elsevier Science, The Boulevard, Langford Lane, Kidlington, Oxford OX5 1GB, UK.
Offprints
Twenty-five offprints will be supplied free of charge. Additional offprints and copies of the issue can be ordered at a specially reduced rate using the order form sent to the corresponding author after the manuscript has been accepted. Orders for reprints (produced after publication of an article) will incur a 50% surcharge.
Copyright
All authors must sign the "Transfer of Copyright" agreement before the article can be published. This transfer agreement enables Elsevier Science Ltd to protect the copyrighted material for the authors, without the author relinquishing his/her proprietary rights. The copyright transfer covers the exclusive rights to reproduce and distribute the article, including reprints, photographic reproductions, microfilm or any other reproductions of a similar nature, and translations. It also includes the right to adapt the article for use in conjunction with computer systems and programs, including reproduction or publication in machine-readable form and incorporation in retrieval systems. Authors are responsible for obtaining from the copyright holder permission to reproduce any material for which copyright already exists.
Author Enquiries:
For enquiries relating to the submission of articles (including electronic submission), the status of accepted manuscripts through our "Track a Paper" feature, specific enquires on the preparation of electronic artwork, author Frequently Asked Questions and any other enquiries relating to Elsevier Science, please consult Elsevier's Author Gateway.
Contact details for questions arising after acceptance of an article, especially those relating to proofs, are provided when an article is accepted for publication.
Keywords for Composites Science and TechnologyBack to General Instructions
Authors should select a maximum of five keywords. Each Keyword should be accompanied by the capital letter denoting the category from which the keyword has been selected. If authors wish they may nominate one keyword which is not included in the list below. The list of up to five keywords should appear on the title page of each paper submitted for consideration, following the abstract.
The keywords for Composites Science and Technology are separated into five categories:
A. material
B. property
C. analysis
D. testing
E. processing
A. material (Back)
Adhesive joints
Alloys
Amorphous materials
Aramid fibre
Carbon fibres
Ceramic-matrix composites (CMCs)
Ceramics
Coating
Coupling agents
Fabrics/textiles
Fibres
Flexible composites
Glass fibres
Glasses
Hybrid compounds
Intermetallics
Layered structures
Metal-matrix composites (MMCs)
Metals
Nanostructures
Oxides
Particle-reinforced composites
Polymer-matrix composites (PMCs)
Polymers
Preceramic polymer
Recycling
Short-fibre composites
Smart materials
Structural materials
Textile composites
Wood
B. property (Back)
Corrosion
Creep
Curing
Debonding
Defects
Durability
Electrical properties
Electron diffraction
Embrittlement
Environmental Degradation
Fatigue
Fibre/matrix bond
Fracture
Fracture toughness
Fragmentation
Friction/wear
High-temperature properties
Hygrothermal effect
Impact behaviour
Interface
Interfacial strength
Interphase
Magnetic properties
Matrix cracking
Mechanical properties
Microstructure
Modelling
Non-linear behaviour
Plastic deformation
Porosity
Strength
Stress/strain curves
Surface treatments Surfaces
Synergism
Thermal properties
Thermomechanical properties
Toughness Transport properties
Vibration
C. analysis (Back)
Anelasticity
Anisotrophy
Buckling
Complex moduli
Computational simulation
Crack
Damage mechanics
Damage tolerance
Deformation
Delamination
Elastic properties
Failure criterion
Fibre bridging
Finite element analysis (FEA)
Laminates
Laminate theory
Notch
Plate theory
Probabilistic methods
Residual stress
Sandwich
Shell theory
Statistics
Stress concentrations
Stress relaxation
Stress transfer
Transverse cracking
D. testing (Back)
Acoustic emission
Auger electron spectroscopy (AES)
Differential scanning calorimetry (DSC)
Differential thermal analysis (DTA)
Electron energy loss spectroscopy (EELS)
Electron microprobe analysis
Fractography
Hardness testing
Infrared (IR) spectroscopy
Life prediction
Moire techniques
Non-destructive testing
Optical microscopy
Photoelectron spectroscopy (XPS)
Raman spectroscopy
Scanning electron microscopy (SEM)
Scanning/transmission electron microscopy (STEM)
Secondary ion mass spectrometry (SIMS)
Thermogravimetric analysis (TGA)
Transmission electron microscopy (TEM)
Ultrasonics
X-ray diffraction (XRD)
X-ray fluorescence (XRF)
E. processing(Back)
Annealing
Braiding
Casting
Chemical vapour deposition (CVD)
Chemical vapour infiltration (CVI)
Directional solidification
Extrusion
Filament winding
Heat treatment
Injection moulding
Ion implantation
Ion plating
Isostatic pressing
Knitting
Liquid metal infiltration (LMI)
Melt-spinning
Physical vapour deposition
Plasma deposition
Plasma spraying
Powder processing
Pultrusion
Resin transfer moulding (RTM)
Sintering
Slip casting
Sol-gel methods
Welding/joining
Editorial Board
|
Editor-in-Chief:
 |
|
T.-W. Chou, Center for Composite Materials and Department of Mechanical Engineering, University of Delaware, Newark, DE 19716, USA.
Email:chou@me.udel.edu
|
Asian and Australasian Editor:
|
|
Y.-W. Mai, Centre for Advanced Materials Technology, School of Aerospace, Mechanical and Mechatronic Engineering, University of Sydney, New South Wales 2006, Australia.
Email:mai.cst@aeromech.usyd.edu.au
|
European Editor:
|
|
K. Schulte, Technical University Hamburg-Harburg, Polymer & Composites, Denickestrasse 15, D-21073 Hamburg Germany.
Email:schulte@tu-harburg.de
|
Editorial Board:
|
|
C. Baillie, Imperial College, London, UK
|
|
L.A. Berglund, Royal Institute of Technology, Stockholm, Sweden
|
|
W.J. Cantwell, University of Liverpool, UK
|
|
J.-Y. Cavaill¨¦, INSA de LYON, France
|
|
Fu-Kuo. Chang, Stanford University, USA
|
|
T.W. Clyne, University of Cambridge, UK
|
|
H.P. Degischer, Technical University Wien, Austria
|
|
S. Du, Harbin Institute of Technology, P.R. China
|
|
K. Friedrich, University of Kaiserslautern, Germany
|
|
H. Fukuda, Science University of Tokyo, Japan
|
|
T. Ishikawa, National Aerospace Laboratory, Tokyo, Japan
|
|
A. Kelly, University of Cambridge, UK
|
|
M.S. Kumosa, University of Denver, Colorado, USA
|
|
P. Ladev¨¨ze, Universit¨¦ de Paris VI, France
|
|
W.I. Lee, Seoul National University, South Korea
|
|
A.C. Loos, Virginia Polytechnic Institute & State University, VA, USA
|
|
S.T. Mileiko, Russian Academy of Sciences, Chergnogolovka Moscow District, Russia
|
|
R. Naslain, Laboratoire des Composites Thermostructuraux, Pessac, France
|
|
L. Nicolais, Universit¨¢ Degli Studi di Napoli, Italy
|
|
N.J. Pagano, Wright-Patterson Air Force Base, Ohio, USA
|
|
T. Peijs, Queen Mary University of London, UK
|
|
S.L. Phoenix, Cornell University, New York, USA
|
|
R.B. Pipes, University of Akron, OH, USA
|
|
N.R. Sottos, University of Illinois at Urbana-Champaign, IL, USA
|
|
C.T. Sun, Purdue University, West Lafayette, USA
|
|
N. Takeda, The University of Tokyo, Japan
|
|
H.D. Wagner, The Weizmann Institute of Science, Rehovot, Israel
|
|
M.R. Wisnom, University of Bristol, UK
|
|
刊名字顺( Alphabetical List of Journals):
返回页首 