期刊名称：CATENA
 期刊简介(About the journal)
投稿须知(Instructions to Authors)
编辑部信息(Editorial Board)
About the journal
CATENA publishes original contributions in the fields of: GEOECOLOGY, the geoscientific-hydro-climatological
subset of process-oriented studies of the present ecosystem,
- the total environment of landscapes and sites
- the flux of energy and matter (water, solutes, suspended matter, bed load) with special regard to space-time variability
- the changes in the present ecosystem, including the earth's surface and
LANDSCAPE EVOLUTION, the genesis of the present ecosystem, in particular the genesis of its structure concerning soils, sediment, relief, their spatial organization and analysis in terms of paleoprocesses;
- soils: surface, relief and fossil soils, their spatial organization pertaining to relief development
- sediment with relevance to landscape evolution, the paleohydrologic environment with respect to surface runoff, competence, and capacity for transport of bed material and suspended matter, infiltration, groundwater and channel flow
- the earth's surface, relief elements and their spatial-hierarchical organization in relation to soils and sediment
- the paleoclimatological properties of the sequence of paleoenvironments.
CATENA publishes multidisciplinary studies as well as monodisciplinary papers that are of interest to other disciplines and are of relevance to landscape studies.
Publisher's note
We are delighted to be able to inform you about an important development for the benefit of authors and readers of Catena.
Catena is included in a new initiative from Elsevier: 'Colourful e-Products'. The journal is now able to accept submissions from authors that contain colour illustrations, and to reproduce these at no charge in colour, on line, in ScienceDirect.
This 'colourful e-products' solution provides a welcome step forward now that scientists increasingly access information on line. Scientists in many disciplines need to be able to publish their work in colour, but the cost of colour printing in small, specialised journals can be prohibitive and we realise that not all scientists have appropriate funds to cover the charges.
Authors wishing to make use of this facility should ensure that the artwork is in an acceptable format (TIFF, EPS or MS Office files) and at the correct resolution. In addition, for colour online and black and white in print, both colour and black and white artwork (file and/or hardcopy) is provided.
There is no extra charge for authors who participate in this new facility. Further information on electronic artwork can be found at http://authors.elsevier.com/artwork.
To view the articles online please access the journal from the ScienceDirect website: http://www.sciencedirect.com.
It will continue to be possible for figures to be reproduced in colour, in print, for an additional charge.
Your feedback and comments are welcome.
Elsevier
Amsterdam, The Netherlands
For more information/suggestions/comments please contact AuthorSupport@elsevier.com
Instructions to Authors
AIMS AND SCOPE
CATENA publishes original contributions in the fields of: GEOECOLOGY, the geoscientific-hydro-climatological subset of process-oriented studies of the present ecosystem,
- the total environment of landscapes and sites
- the flux of energy and matter (water, solutes, suspended matter, bed load) with special regard to space-time variability
- the changes in the present ecosystem, including the earth's surface and
LANDSCAPE EVOLUTION, the genesis of the present ecosystem, in particular the genesis of its structure concerning soils, sediment, relief, their spatial organization and analysis in terms of paleoprocesses;
- soils: surface, relief and fossil soils, their spatial organization pertaining to relief development
- sediment with relevance to landscape evolution, the paleohydrologic environment with respect to surface runoff, competence, and capacity for transport of bed material and suspended matter, infiltration, groundwater and channel flow
- the earth's surface, relief elements and their spatial-hierarchical organization in relation to soils and sediment
- the paleoclimatological properties of the sequence of paleoenvironments.
CATENA publishes multidisciplinary studies as well as monodisciplinary papers that are of interest to other disciplines and are of relevance to landscape studies.
Submission of Manuscripts
Manuscripts should be submitted in quadruplicate to:
The Editorial Office
CATENA
PO Box 1930
1000 BX Amsterdam
The Netherlands
Fax: +31 20 485 3325
1. Papers must be submitted in their final form, bearing in mind that no further correction /addition is possible.
2. Submission of an article is understood to imply that the article is original and is not being considered for publication elsewhere. Submission also implies that all authors have approved the paper for release and are in agreement with its content. Upon acceptance of the article by the journal, the author(s) will be asked to transfer the copyright of the article to the publisher. This transfer will ensure the widest possible dissemination of information.
3. Manuscripts should be structured in a way that conforms to that of the journal in question.
4. Manuscripts must be written in English. Authors whose native language is not English are recommended to seek the advice of a colleague who has English as his mother-tongue before submitting their manuscript. Manuscripts written in correct English require less time for review and publication.
Authors in Japan please note: Upon request, Elsevier Japan will provide authors with a list of people who can check and improve the English of their paper (before submission). Please contact our Tokyo office: Elsevier Japan, 9-15 Higashi Azabu 1-chome, Minato-ku, Tokyo 106; Tel. +81 3 5561 5032; Fax +81 3 5561 5045; E-mail: info@elsevier.co.jp
5. Authors should use IUGS terminology. S.I. units should be used.
6. The manuscript should be prepared on a word processor and printed with double spacing and wide margins. The various headings should be clearly differentiated, and first and second order headings should be numbered.
7. The entire manuscript should be paginated. However, in the text no reference should be made to page numbers; if necessary, you may refer to section numbers.
8. Manuscripts should generally be organized in the following order:
a. Title (should be clear, descriptive and not too long)
b. Name(s) of the author(s) and their affiliations and fax and e-mail numbers. Fax and e-mail numbers should be placed as footnotes. In the case of more than one author please indicate to whom the correspondence should be addressed.
c. Abstract
d. Keywords (indexing terms), normally 4-6 items
e. Introduction
f. Area descriptions, methods and material studied
g. Results and analyses
h. Discussion and conclusions
i. Acknowledgements
j. Appendices
k. References
l. Tables
m. Figure captions
n. Figures
Elsevier reserves the right of returning to the author for revision accepted manuscripts and illustrations which are not in the form given in this guide.
Enquiries
Authors can also keep a track on the progress of their accepted article, and set up e-mail alerts informing them of changes to their manuscript's status, by using the "Track a Paper" feature of Elsevier's Author Gatewayhttp://authors.elsevier.com. For privacy, information on each article is password-protected. The author should key in the "Our Reference" code (which is in the letter of acknowledgement sent by the publisher on receipt of the accepted article) and the name of the corresponding author. In case of problems or questions, authors may contact the Author Service Department, E-mail:authorsupport@elsevier.com.
Electronic manuscripts
Electronic manuscripts have the advantage that there is no need for rekeying of text, thereby avoiding the possibility of introducing errors and resulting in reliable and fast delivery of proofs.
For the initial submission of manuscripts for consideration, hardcopies are sufficient. Elsevier is now publishing all manuscripts using electronic production methods, and therefore needs to receive the electronic files of your article with two hardcopies of the accepted version. Electronic files can be submitted on floppy disks, ZIP/JAZ disks, or CD ROMs.
To ensure fast and easy processing of disk submissions, please use the following guidelines:
1. It is important that the file saved is in the native format of the wordprocessor program used.
2. Name your files using the correct extension, eg. Fig1.cdr, tbl1-6.xls, text.doc, fig1a.eps, fig1.tif, etc.
3. Save text and graphics on separate disks.
4. Label all disks with your name, journal to be published in, and filenames. Please also include details of the word-processing software, compression software, and platform (PC, Mac, UNIX etc) used in the creation of your files.
5. Ensure that electronic and hardcopy versions of your manuscript are identical. In cases of a discrepancy, the hardcopy version will be used as the definitive version by the production team.
We can accept most word-processing formats (ideally Microsoft Word or WordPerfect). Most formatting codes will be removed or replaced on processing your article so there is no need for you to use excessive layout styling. In addition, do not use options such as automatic word breaking, justified layout, double columns or automatic paragraph numbering (especially for numbered references). However do use bold face, italic, subscripts, superscripts etc. When preparing tables, if you are using a table grid, please use only one grid for each separate table and not a grid for each row. If no grid is being used, use tabs to align columns not spaces. Please follow this order when you create your manuscript: Title, Authors, Affiliations, Abstract, Keywords, Main text, Acknowledgements, Appendix, References, Vitae, Figure legends and then Tables. Do not import the Figures into the text file.
Abstract
1. The abstract should be a concise summary of the paper stating the methods used, the main results and the conclusions in a way that does not require reference to the body of the paper; it should not be longer than 500 words.
Keywords
Authors should provide 4 to 6 keywords. These must be taken from the most recent American Geological Institute GeoRef Thesaurus and should be placed beneath the abstract.
Tables
1. Authors should take note of the limitations set by the size and layout of the journal. A table should not exceed the printed area of the page. If this appears impossible, reversing columns and rows will often make the impossible possible.
2. Large tables should be avoided. Foldouts can only be accepted in exceptional cases. If many data are to be presented, an attempt should be made to divide these over two or more tables.
3. Tables should be compiled on separate sheets and must be numbered according to their sequence in the text. The text must include references to all tables.
4. Each table must have a brief and self-explanatory title. Column headings should be brief, but sufficiently explanatory. Units of measurement should be given in parentheses. Vertical lines must not be used to separate columns - leave extra space between the columns instead.
5. Explanations that are necessary to the understanding of the table should be given as footnotes at the bottom of the table. A footnote should be indicated by a lower-case letter.
Illustrations
1. All illustrations must be presented separate from the manuscript, unfolded, and as originals. Each illustration must be sharp and draughted at high density on bright white paper, on glossy paper or on drawing film. Authors are reminded to provide copies of all illustrations with the originals.
2. Photographs and micrographs, etc. must be sharp and exhibit good contrast. Original glossy prints (e.g., from negatives) are required. Reproductions of photographs, etc. cannot be accepted. The object being shown must fill the image.
3. All illustrations must be numbered consecutively and referred to in the text.
4. Each illustration should be identified on the reverse side (or - in the case of line-drawings - on the lower front side) by its number and the name of the principle author. Indicate the top of the illustration in cases where doubt may arise.
5. Illustrations must designed with the page format of the journal in mind. If necessary, they will be reduced to the proper format by the publisher. The lettering and other details must have dimensions that do not become illegible or unclear after the required reduction. Foldouts can only be accepted in exceptional cases. Design all figures in a way that uses all the available space, do not leave large areas blank. Remember that sharp, neat, well presented illustrations will be essential to the readers' appreciation of your paper.
6. Lettering must be drafted sharply and neatly. The lettering must be in the language of the manuscript. The same type of lettering should be used throughout.
7. Bar scales must be used rather than magnification factors that must be changed in cases of reduction. Do not forget to mention the units used in diagrams.
8. All maps must have north and latitude and longitude indicated.
9. Each illustration must have a caption. All figure captions should be typed on a separate sheet and be double spaced.
10. Explanations must be given in the typewritten caption. Text in the figures should be kept to a minimum.
11. Laser-printed illustrations are acceptable. In such cases please also provide a disc copy.
12. Colour figures can be accepted provided the author is prepared to meet the reproduction costs. Please consult the publisher for further information.
Free colour reproduction
If, together with your accepted article, you submit usable colour figures then Elsevier will ensure, at no additional charge, that these figures will appear in colour on the web (e.g., ScienceDirect and other sites) regardless of whether or not these illustrations are reproduced in colour in the printed version. For colour reproduction in print, you will receive information regarding the costs from Elsevier after receipt of your accepted article. For further information on the preparation of electronic artwork, please see http://www.elsevier.com/locate/authorartwork).
Please note: Because of technical complications which can arise by converting colour figures to 'grey scale' (for the printed version should you not opt for colour in print) please submit in addition usable black and white prints corresponding to all the colour illustrations.
Basic guidelines for submitting computer generated artwork/illustrations: (For in-depth information about submitting electronic artwork, please check http://authors.elsevier.com)
1. Computer-generated illustrations and halftones/line/tones (either colour or black & white) are acceptable. Since we cannot guarantee the usability of graphic files, original hardcopies of all illustrations must accompany the accepted printout of the manuscript in all cases.
2. TIFF or EPS files are the preferred format. Suggested packages for line graphics are Adobe Illustrator (version 3.0 or above), Freehand, and Corel Draw. Graphics made in WordPerfect or Word generally have too low a resolution. Files of scanned line graphics can be accepted preferably at a resolution of 1000 dpi, for scanned halftones (300 dpi) and scanned line/tones (500 dpi).
3. Black & white photos, micrographs etc should not be saved as colour.
4. Colour illustrations should be scanned in at 300 dpi (500 dpi for colour/line tones).
5. If the image files are large and you compress them prior to submission, please indicate the compression software used.
References
1. All references cited in the text are to be listed at the end of the paper. The manuscript should be carefully checked to ensure that the spellings of authors' names and publication years are exactly the same in the text as in the reference list. Do not type author's and editor's names in capitals.
2. In the text refer to the author's name (without initials) and year of publication, followed - if necessary - by a short reference to appropriate pages. Examples: ``Because Peterson (1994) has shown that...'. ``This is in agreement with results obtained later (Kramer, 1995, pp. 12-16)'.
3. If reference is made in the text to publications written by more than two authors the name of the first author should be used, followed by ``et al.'. This indication, however, should never be used in the list of references. In this list names of authors and all co-authors must be given in full.
4. References in the text should be arranged chronologically. The list of references should be arranged alphabetically by authors' names, and chronologically per author. If an author's name in the list is also mentioned with co-authors, the following order should be used: Publications of the single author, arranged according to publication year - publications of the same author with one co-author, arranged according to publication year - publications of the author with more than one co-author, arranged according to publication year.
The following system should be used for arranging references:
a. Journal papers: Names and initials of all authors, year. Title of paper. Journal name (given in full or abbreviated using the International List of Periodical Title Word Abbreviations), volume number (issue number): first and last page numbers of the paper.
Example:
Elbaz-Poulichet, F., Guan, D.M. and Martin, J.M., 1991. Trace metal behaviour in a highly stratified Mediterranean estuary: the Krka (Yugoslavia). Mar. Chem., 32: 211-224.
b. Monographs: Names and initials of all authors, year. Title of the monograph. Publisher, location of publisher.
Example:
Zhdanov, M.S. and Keller, G.V., 1994. The Geoelectrical Methods in Geophysical Exploration. Elsevier, Amsterdam.
c. Edited volume papers: Names and initials of all authors, year. Title of paper. Names and initials of the volume editors, title of the edited volume. Publisher, location of publisher, first and last page numbers of the paper.
Example:
Thomas, E., 1992. Middle Eocene-late Oligocene bathyal benthic foraminifera (Weddell Sea): faunal changes and implications for ocean circulation. In: D.R. Prothero and W.A. Berggren (Editors), Eocene-Oligocene Climatic and Biotic Evolution. Princeton Univ. Press, Princeton, NJ, pp. 245-271.
d. Conference proceedings papers: Names and initials of all authors, year. Title of paper. Name of the conference. Publisher, location of publisher, first and last page numbers of the paper.
Example:
Smith, M.W., 1988. The significance of climatic change for the permafrost environment. Final Proc. Int. Conf. Permafrost. Tapir, Trondheim, Norway, pp. 18-23.
e. Unpublished theses, reports, etc.: Names and initials of all authors, year. Title of item. All other relevant information needed to identify the item (e.g., technical report, Ph.D. thesis, institute, etc.).
Example:
Moustakas, N., 1990. Relationships of morphological and physicochemical properties of Vertisols under Greek climate conditions. Ph.D. Thesis, Agricultural Univ. Athens, Greece.
5. In the case of publications in any language other than English, the original title is to be retained. Titles of publications in non-Latin alphabets should be transliterated, and a note such as "(in Russian)" or "(in Japanese, with English Abstr.)" should be added at the end of the reference.
Formulae
1. All formulae should be presented consistently and clearly with regard to the meaning of each symbol and its correct location. Formulae must be typed throughout.
2. All unusual symbols must be collected in a separate list in the appendix, giving a clear explanation of each symbol.
3. Please try to keep the notation as simple as possible, and avoid ambiguities. Do not use special typefonts if there is no urgent need to do so.
4. Different formulae should be clearly separated in the manuscript, at least by punctuation marks, if not by words. Avoid breaking formulae if breaking is not strictly necessary (i.e., if the equation is less than one typed line). Never let a sentence consist of formulae alone (i.e., without any connection with the preceding text).
5. Do not use complicated juxtapositions of symbols. Also, try to avoid complicated subscripts and superscripts; third-order indices especially present difficulties as to their size and position, and fourth-order indices are taboo.
6. The manuscript must show a clear distinction between similar symbols, (e.g., between zero (0) and the letter O, between one (1) and the letter l, and between multiplication ( ) and the letter x).
7. Important formulae (e.g. definitions) must be displayed. All formulae which are to be referred to later on must be displayed and numbered consecutively throughout the paper; the number should appear on the right-hand side of the page.
8. In chemical formulae the valence of ions must be given as, for example, Ca2+ and CO32 rather than as Ca++ and CO3--.
9. Isotope numbers should precede the symbols (e.g., 18O).
Footnotes
1. Footnotes should only be used if absolutely essential. In most cases it will be possible to incorporate them in the main text.
2. If used, footnotes should be numbered consecutively throughout the manuscript, indicated by superscript arabic numbers, and kept as short as possible.
Copyright
1. Upon acceptance of an article by the journal, the author(s) will be asked to transfer the copyright of the article to the publisher. This transfer will ensure the widest possible dissemination of information.
2. The author is responsible for obtaining permission to use any copyrighted material:
a. When quoting from someone else's work or when considering reproducing an illustration or table from a book or journal article, the author should ensure that he is not infringing copyright.
b. Although in general an author may quote from other published works, he should obtain permission from the copyright holder if he wishes to use substantial excerpts or to reproduce tables, plates, or other illustrations. If the copyright holder is not the author of the quoted or reproduced material, it is recommended that the permission of the author in question is also sought.
c. Material in unpublished letters and manuscripts is also protected and must not be published unless permission has been obtained.
d. A suitable acknowledgement of any borrowed material must always be made.
3. Company clearance, if applicable, should be acquired prior to submission.
4. Submission of a paper for review is interpreted as a statement that the permission to reproduce and company clearance, if applicable, have been acquired.
5. The manuscript of a paper intended for publication in the journal may be reproduced and used elsewhere by the author, with the understanding that no use will be made of the material for commercial purposes.
6. Once the paper has been prepared in publication format by the publisher, the permission of the publisher is required for any use of the paper.
Obtaining Permissions
Please use our Permission Request Form on http://www.elsevier.com/locate/permission to request permission to reproduce material from books and journals published by Elsevier BV, Elsevier Ltd, Elsevier Inc, Elsevier SA, Elsevier Ireland Ltd, and the Pergamon, JAI and Ablex imprints.
Requests are handled by the Global Rights Department in Oxford, UK and are normally processed within 10 working days of receipt. However, every effort will be made to meet more immediate deadlines if indicated.
Alternatively you may send a written request to:
Global Rights Department
Elsevier
PO Box 800
Oxford OX5 1DX
UK
Tel: +44 1865 843830
Fax: +44 1865 853333 or +44 1865 843950
e-mail: permissions@elsevier.co.uk
Proofs
Proofs will be sent to the corresponding author as given on the title page of the manuscript. Usually proofs will be sent by email as a PDF file.
Only typesetter's errors may be corrected; no changes in, or additions to, the edited manuscript will be allowed.
Elsevier will do everything possible to get your article corrected and published as quickly and accurately as possible. Therefore, it is important to ensure that all of your corrections are sent back to us in one communication. Subsequent corrections will not be possible, so please ensure your first sending is complete.
Reprints
Twenty five reprints of each article are supplied free of charge. Additional reprints can be ordered on a reprint order form which will be sent to the corresponding author of the accepted article by the publisher.
5 November 2002
Editorial Board
|
Editors:
 |
|
J.A. Catt, IACR-Rothamsted, Harpenden, Herts., AL5 2JQ, UK.
Email:j.catt@geog.ucl.ac.uk
|
|
J. Poesen, Lab. voor Experimentele Geomorfologie, K.U. Leuven, Redingenstraat 16bis, B-3000 Leuven, Belgium.
Email:jean.poesen@geo.kuleuven.ac.be
|
|
M.J. Singer, University of California, Department of Land, Air and Water Resources, One Shields Ave., Davis, CA 95616, USA.
Email:mjsinger@ucdavis.edu
|
|
O. Slaymaker, University of British Columbia, Department of Geography, 1984 West Mall, Vancouver, BC. V6T 1Z2, Canada.
Email:olav@geog.ubc.ca
|
|
M.F. Thomas, University of Stirling, Department of Environmental Science, Stirling, FK9 4LA, UK.
Email:m.f.thomas@stir.ac.uk
|
|
S.W. Trimble, University of California, Department of Geography, 1255 Bunche Hall, 405 Hilgard Avenue, Los Angeles, CA 90024, USA.
Email:trimble@geog.ucla.edu
|
Founding Editor:
|
|
H. Rohdenburg,
|
Honorary Editor:
|
|
D.M. Yaalon, Jerusalem, Israel
|
Editorial Board:
|
|
R.W. Arnold, USDA Soil Conservation Service, Washington, D.C., USA
|
|
K. Auerswald, Technische Universitat Munchen, Freising-Weihenstephan, Germany
|
|
G. Benito, Centre de Ciencias Medioambientales, CSIC, Madrid, Spain
|
|
P.W. Birkeland, University of Colorado, Boulder, CO USA
|
|
H.-P. Blume, Institut fur Pflanzenernahrung und Bodenkunde, Kiel, Germany
|
|
J. Bouma, Wageningen Agricultural University, The Netherlands
|
|
R.B. Bryan, University of Toronto, Scarborough, Ont., Canada
|
|
P.A. Burrough, Rijksuniversiteit Utrecht, The Netherlands
|
|
B. Diekkruger, University of Bonn, Bonn, Germany
|
|
I. Douglas, University of Manchester, UK
|
|
A.R. Eschner, State University of New York, Syracuse, NY, USA
|
|
N. Fedoroff, INRA Centre de Grignon, Thiverval-Grignon, France
|
|
L.R. Follmer, Illinois State Geological Survey, Champaign, IL, USA
|
|
F. Gallart, Institute of Earth Sciences James Almera, Barcelona, Spain
|
|
J.B.J. Harrison, New Mexico Technical, Socorro, NM, USA
|
|
M. Icole, LGQ/CNRS/CEREGE Aix-en-Provence, France
|
|
A.C. Imeson, Universiteit van Amsterdam, The Netherlands
|
|
S. Iwata, National Research Institute of Agricultural Engineering, Ibaraki, Japan
|
|
A. Kerenyi, Kossuth University, Debrecen, Hungary
|
|
G.J. Kukla, Lamont-Doherty Geological Observatory of Columbia University, Palisades, NY, USA
|
|
H. Lavee, Bar-Ilan University, Ramat-Gan, Israel
|
|
L.D. McFadden, University of New Mexico, Albuquerque, NM, USA
|
|
M.E. Meadows, University of Cape Town, Rondebosch, South Africa
|
|
M.A. Nearing, Southwest Watershed Research Center, AZ, USA
|
|
M.D. Newson, University of Newcastle-upon-Tyne, UK
|
|
W. Nickling, University of Guelph, Ont., Canada
|
|
D.R. Nielsen, Davis, CA, USA
|
|
T. Oguchi, Tokyo University, Japan
|
|
C.G. Olson, USDA NRCS, Lincoln, NE, USA
|
|
Y.A. Pachepsky, USDA:ARS:BA:ANRI:AWPL, Beltsville, MD, USA
|
|
B. Pillans, Australian National University, Canberra, ACT, Australia
|
|
D. Righi, Universite de Poitiers, France
|
|
A. Ruellan, Montpellier, France
|
|
U. Schwertmann, Technische Universitat Munchen, Freising-Weihenstephan, Germany
|
|
K. Stahr, Universitat Hohenheim, Stuttgart, Germany
|
|
L. Starkel, Polish Academy of Science, Krakow, Poland
|
|
G. Stoops, Universiteit Gent, Belgium
|
|
J. Thornes, King's College London, UK
|
|
D. Torri, C.N.R. Centro di Studio per la Genesi, Firenze, Italy
|
|
C. Valentin, Vientiane, Laos
|
|
D.E. Walling, Exeter, Devon, UK
|
|
R. Webster, Rothamsted Experimental Station, Harpenden, Herts., UK
|
|
M. Williams, The University of Adelaide, S.A., Australia
|
|
A. Yair, Hebrew University of Jerusalem, Israel
|
|
D. Yaalon, Institute of Earth Sciences, Hebrew University of Jerusalem, Givat Ram Campus, 91904 Jerusalem, Israel
|
|
刊名字顺( Alphabetical List of Journals):
返回页首 