期刊名称：EARTHQUAKES AND STRUCTURES
 期刊简介(About the journal)
投稿须知(Instructions to Authors)
编辑部信息(Editorial Board)
About the journal
Aims and Scope
The Earthquakes and Structures, An International Journal, focuses on the effects of earthquakes on civil engineering structures. The journal will serve as a powerful repository of technical information and will provide a highimpact publication platform for the global community of researchers in the traditional, as well as emerging, subdisciplines of the broader earthquake engineering field. Specifically, some of the major topics covered by the Journal include: .. characterization of strong ground motions, .. quantification of earthquake demand and structural capacity, .. design of earthquake resistant structures and foundations, .. experimental and computational methods, .. seismic regulations and building codes, .. seismic hazard assessment, .. seismic risk mitigation, .. site effects and soil-structure interaction, .. assessment, repair and strengthening of existing structures, including historic structures and monuments, and .. emerging technologies including passive control technologies, structural monitoring systems, and cyberinfrastructure tools for seismic data management, experimental applications, early warning and response
Instructions to Authors
1. Submission of the paper
Authors are asked to submit manuscripts in PDF format electronically through the Techno-Press Manuscript Upload System (TeMUS) (http://www.techno-press.org/papers). Exceptionally, the special issue papers may be directly submitted to the Guest Editor. If you have difficulties in using TeMUS, please contact us at[technop7@chol.com]. On receiving submitted papers, the system will issue the paper ID and Password to the corresponding author which may be conveniently used to check the status of submitted papers.
2. Preparation of the manuscript
General : The manuscripts should be in English and typed with single column and single line spacing on single side of A4 paper. Submitted papers will be published in three categories, i.e., 1) Regular technical paper, 2) Review papers and 3) Discussions. The first page of an article should contain; (1) a title of paper which well reflects the contents of the paper (Arial, 16pt), (2) all the name(s) and affiliations(s) of authors(s) (Arial, 12pt), (3) an abstract of 100~250 words (Times New Roman, 11pt), (4) 5-10 keywords following the abstract, and (5) footnote (personal title and email address of the corresponding author (required) and other authors' (not mandatory)). The paper should be concluded by proper conclusions which reflect the findings in the paper. The normal length of the technical paper should be about 14-20 journal pages. There will be no page charges and no other fees unless the author wishes arrangements to provide an open access to his article. Authors are advised to read the details in the Appendix A for guide, Appendix B for a template and Appendix C for index of the instructions to authors for the format of the first page of the paper.
Tables and figures : Tables and figures should be consecutively numbered and have short titles. They should be referred to in the text as following examples (e.g., Fig. 1(a), Figs. 1 and 2, Figs. 1(a)-(d) / Table 1, Tables 1-2), etc. Tables should have borders (1/2pt plane line) with the captions right before the table. Figures should be properly located in the text as an editable image file (.jpg) with captions on the lower cell. All of the original figures are required at the end of the manuscript for reference in editing.
Units and mathematical expressions : It is desirable that units of measurements and abbreviations should follow the System Internationale (SI) except where the other unit system is more suitable. The numbers identifying the displayed mathematical expression should be placed in the parentheses and referred to in the text as following examples (e.g., Eq. (1), Eqs. (1)-(2)). Mathematical expressions must be inserted as an object (set as Microsoft Equations 3.0) for Microsoft Word 2007 and after versions. Image-copied text or equations are not acceptable unless they are editable. The raised and lowered fonts cannot be used for superscription and subscription.
References : A list of references which reflect the current state of technology in the field locates after conclusions of the paper. For details to prepare the list of references and cite them in the text, authors are advised to follow the introduction and the sample list in the Appendix A and Appendix C of the instruction.
3. Review
All the submitted papers will undergo a peer-review process, and those papers positively recommended by at least two expert reviewers will be finally accepted for publication in the Techno-Press Journals or after any required modifications are made.
4. Proofs
Proofs will be sent to the corresponding author to correct any typesetting errors. Alterations to the original manuscript will not be accepted at this stage. Proofs should be returned within 48 hours of receipt.
5. Copyright
Submission of an article to a Techno-Press Journal implies that it presents the original and unpublished work, and not under consideration for publication elsewhere. On acceptance of the submitted manuscript, it is implied that the copyright thereof is transferred to the Techno-Press. The Transfer of Copyright Agreement may also be submitted.
Editorial Board
| Editorial Board |
Prof. Jack Baker
Stanford University
Stanford CA 94305-4020, USA
Prof. Rita Bento
Instituto Superior Tecnico
1049-001 Lisbon, Portugal
Prof. A. Benavent-Climent
University of Granada
E-18071 Granada, Spain
Prof. Shuenn-Yih Chang
National Taipei University of Technology
Taipei 106, Taiwan
Prof. C.C. Chou
National Taiwan University
Taipei 10764, Taiwan
Prof. J.P. Conte
University of California
CA 92093-0085, USA
Prof. Murat Dicleli
Middle East Technical University
TR-06531 Ankara, Turkey
Prof. Russell A. Green
Virginia Tech
Blacksburg, VA 24061, USA
Prof. Aurelio Ghersi
University of Catania
95100 Catania, Italy
Prof. Muneo Hori
University of Tokyo
Tokyo 113-0032, Japan
Prof. J.S. Hwang
National Taiwan University of Sci. & Technol.
Taipei 106, Taiwan
Prof. R.S. Jangid
Indian Institute of Technology, Bombay
Mumbai - 400076, India
Prof. R. Jankowski
Gdansk University of Technology
80-233 Gdansk, Poland
Prof. H.J. Jung
Korea Adv. Inst. Of Sci. & Tech.
Daejeon 305-701, Korea
Prof. A.J. Kappos
Aristotle University of Thessaloniki
54124 Thessaloniki, Greece
Prof. Panagiotis Kotronis
Ecole Centrale de Nantes
44321 Nantes, France
Prof. S. Lagomarsino
University of Genoa
I-16145 Genova, Italy
Prof. Nelson Lam
The University of Melbourne
Victoria 3010, Australia
Prof. H.S. Lee
Korea University
Seoul 136-701, Korea
Prof. Chunxiang Li
Shanghai Jiao Tong University
Shanghai 200030, Peoples R China
Prof. Oscar A. Lopez
Central University of Venezuela
Los Chaguaramos Caracas, Venezuela
Prof. Xilin Lu
Tongji University
Shanghai 200092, Peoples R China
Prof. N. Makris
University of Patras
265 00 Patras, Greece
Prof. C.S. Manohar
Indian Institute of Science
Bangalore 560 012, India |
Prof. G. Manolis
Aristotle University
54124 Thessaloniki, Greece
Prof. Jason P. McCormick
University of Michigan
Ann Arbor MI 48109-2125, USA
Prof. Akira Mita
Keio University
Kanagawa 223-8522, Japan
Prof. Yuji Miyamoto
Osaka University
Osaka 565-0871, Japan
Prof. K.M. Mosalam
University of California, Berkeley
CA 94720, USA
Prof. Masato Motosaka
Tohoku University
Sendai 980-0845, Japan
Prof. G. Mylonakis
University of Patras
Rio 26500, Greece
Dr. Naohiro Nakamura
Takenaka Corporation
Chiba 270-1395, Japan
Prof. Camillo Nuti
The University of Rome Three
00184 Rome, Italy
Prof. Jamie Ellen Padgett
Rice University
Houston, TX 77005, USA
Prof. T.C. Pan
Nanyang Technological University
Singapore 639798, Singapore
Prof. Roberto Paolucci
The Politecnico di Milano
32 - 20133 Milano, Italy
Prof. Paolo E. Pinto
Universita degli Studi di Roma “La Sapienza”
00185 Roma, Italy
Prof. Jorge Ruiz-Garcia
Univ. Michoacana de San Nicolas de Hidalgo
Michoacan, Mexico
Prof. Lothar Stempniewski
Karlsruhe Institute of Technology(KIT)
76131 Karlsruhe, Germany
Prof. Haluk Sucuoglu
Middle East Technical University
TR-06531 Ankara, Turkey
Dr. Timothy Sullivan
University of Pavia
I-27100 Pavia, Italy
Prof. Hideo Takabatake
Kanazawa Institute of Technology Ishikawa
924-0838, Japan
Prof. Tsuyoshi Takada
University of Tokyo
Tokyo 113-8656, Japan
Prof. Amador Teran-Gilmore
Universidad Autonoma Metropolitana
Mexico City 02200, Mexico
Prof. Tomaso Trombetti
University of Bologna
40136 Bologna, Italy
Prof. D. Vamvatsikos
National Technical University of Athens
Athens 10678, Greece
Prof. Yunfeng Zhang
University of Maryland
MD 20742, USA
Dr. John Zhao
GNS Science
Lower Hutt 5040, New Zealand |
| Editorial Board |
Prof. Jack Baker
Stanford University
Stanford CA 94305-4020, USA
Prof. Rita Bento
Instituto Superior Tecnico
1049-001 Lisbon, Portugal
Prof. A. Benavent-Climent
University of Granada
E-18071 Granada, Spain
Prof. Shuenn-Yih Chang
National Taipei University of Technology
Taipei 106, Taiwan
Prof. C.C. Chou
National Taiwan University
Taipei 10764, Taiwan
Prof. J.P. Conte
University of California
CA 92093-0085, USA
Prof. Murat Dicleli
Middle East Technical University
TR-06531 Ankara, Turkey
Prof. Russell A. Green
Virginia Tech
Blacksburg, VA 24061, USA
Prof. Aurelio Ghersi
University of Catania
95100 Catania, Italy
Prof. Muneo Hori
University of Tokyo
Tokyo 113-0032, Japan
Prof. J.S. Hwang
National Taiwan University of Sci. & Technol.
Taipei 106, Taiwan
Prof. R.S. Jangid
Indian Institute of Technology, Bombay
Mumbai - 400076, India
Prof. R. Jankowski
Gdansk University of Technology
80-233 Gdansk, Poland
Prof. H.J. Jung
Korea Adv. Inst. Of Sci. & Tech.
Daejeon 305-701, Korea
Prof. A.J. Kappos
Aristotle University of Thessaloniki
54124 Thessaloniki, Greece
Prof. Panagiotis Kotronis
Ecole Centrale de Nantes
44321 Nantes, France
Prof. S. Lagomarsino
University of Genoa
I-16145 Genova, Italy
Prof. Nelson Lam
The University of Melbourne
Victoria 3010, Australia
Prof. H.S. Lee
Korea University
Seoul 136-701, Korea
Prof. Chunxiang Li
Shanghai Jiao Tong University
Shanghai 200030, Peoples R China
Prof. Oscar A. Lopez
Central University of Venezuela
Los Chaguaramos Caracas, Venezuela
Prof. Xilin Lu
Tongji University
Shanghai 200092, Peoples R China
Prof. N. Makris
University of Patras
265 00 Patras, Greece
Prof. C.S. Manohar
Indian Institute of Science
Bangalore 560 012, India |
Prof. G. Manolis
Aristotle University
54124 Thessaloniki, Greece
Prof. Jason P. McCormick
University of Michigan
Ann Arbor MI 48109-2125, USA
Prof. Akira Mita
Keio University
Kanagawa 223-8522, Japan
Prof. Yuji Miyamoto
Osaka University
Osaka 565-0871, Japan
Prof. K.M. Mosalam
University of California, Berkeley
CA 94720, USA
Prof. Masato Motosaka
Tohoku University
Sendai 980-0845, Japan
Prof. G. Mylonakis
University of Patras
Rio 26500, Greece
Dr. Naohiro Nakamura
Takenaka Corporation
Chiba 270-1395, Japan
Prof. Camillo Nuti
The University of Rome Three
00184 Rome, Italy
Prof. Jamie Ellen Padgett
Rice University
Houston, TX 77005, USA
Prof. T.C. Pan
Nanyang Technological University
Singapore 639798, Singapore
Prof. Roberto Paolucci
The Politecnico di Milano
32 - 20133 Milano, Italy
Prof. Paolo E. Pinto
Universita degli Studi di Roma “La Sapienza”
00185 Roma, Italy
Prof. Jorge Ruiz-Garcia
Univ. Michoacana de San Nicolas de Hidalgo
Michoacan, Mexico
Prof. Lothar Stempniewski
Karlsruhe Institute of Technology(KIT)
76131 Karlsruhe, Germany
Prof. Haluk Sucuoglu
Middle East Technical University
TR-06531 Ankara, Turkey
Dr. Timothy Sullivan
University of Pavia
I-27100 Pavia, Italy
Prof. Hideo Takabatake
Kanazawa Institute of Technology Ishikawa
924-0838, Japan
Prof. Tsuyoshi Takada
University of Tokyo
Tokyo 113-8656, Japan
Prof. Amador Teran-Gilmore
Universidad Autonoma Metropolitana
Mexico City 02200, Mexico
Prof. Tomaso Trombetti
University of Bologna
40136 Bologna, Italy
Prof. D. Vamvatsikos
National Technical University of Athens
Athens 10678, Greece
Prof. Yunfeng Zhang
University of Maryland
MD 20742, USA
Dr. John Zhao
GNS Science
Lower Hutt 5040, New Zealand |
|
