期刊名称：JOURNAL OF ENVIRONMENTAL ENGINEERING AND LANDSCAPE MANAGEMENT
 期刊简介(About the journal)
投稿须知(Instructions to Authors)
编辑部信息(Editorial Board)
About the journal
Journal of Environmental Engineering and Landscape Management is a research journal of Vilnius Gediminas Technical University (VGTU) and is acknowledged by The Lithuanian Academy of Sciences and International Academy of Ecological and Life Protection Sciences (IAELPS) which is an associate member of the Public Information Department of United Nations.
Since 1995 the Journal of Environmental Engineering was published instead of the previous research proceedings Environmental Protection of Vilnius Technical University (2 issues since 1993). In 1995-1998 6 issues were published (2 issues per year). Since 1998 the Journal Environmental Engineering started to be published in volumes (one volume of 4 issues per year).
Since 2003 the Journal was published under a new title - Journal of Environmental Engineering and Landscape Management -(annually one volume of 4 issues) with proceeded issue numeration.
Since 2005 the Journal of Environmental Engineering and Landscape Management is published in volumes (one volume of 4 issues per year) with proceeded issue numeration. Articles in English and in other languages (Lithuanian, German and Russian) are being accepted.
Publication of the Journal is funded by the Ministry of Education and Science of the Republic of Lithuania.
The Journal is designed for publishing papers concerning the following areas of research:
atmosphere air pollution control and pollution mitigation technologies,
water pollution control and pollution mitigation technologies,
soil pollution control and pollution mitigation technologies,
entrails of the earth, their protection,
waste management, zero-waste technologies,
environmental expertise,
physical and technological environmental impacts control and reduction technologies,
nuclear hydrophysics and radioactive pollution,
modelling of environmental processes,
environmental monitoring,
landscape protection,
environmental ethics,
environmental law and management,
quality of indoor and outdoor environment
Besides, it publishes: short reports and observations, reviews and bibliography, reports about conferences and workshops.
The papers published in the Journal of Environmental Engineering and Landscape Management are abstracted in:
Science Citation Index Expanded (ISI Web of Science) (nuo 2007 m. sausio 5 d.)
Journal Citation Reports/Science Edition (ISI Web of Science) (nuo 2007 m. sausio 5 d.);
Index Copernicus
Compendex
CSA Materials Research Database with METADEX (Cambridge Scientific Abstracts);
Current Abstracts since 2005 (EBSCO publishing)
Environment Complete since 2005 (EBSCO publishing)
Environment Index since 2005 (EBSCO publishing)
Garden, Landscape and Horticulture Index since 2005 (EBSCO publishing)
TOC Premier since 2005 (EBSCO publishing)
SCOPUS (Elsiever)
ICONDA (IRBdirect)
VINITI
All articles published in the Journal of Environmental Engineering and Landscape Management are reviewed at least by two members of Editorial Board.
Correspondence, including manuscripts for submission should be addressed to Prof Dr Habil Pranas BaltrÄ—nas, Editor-in-chief of the Journal of Environmental Engineering and Landscape Management:
Journal of Environmental Engineering and Landscape Management
Department of Environmental Protection
Faculty of Environmental Engineering
Vilnius Gediminas Technical University
SaulÄ—tekio al. 11, LT-10223 Vilnius-40, Lithuania
Phone: (370 5) 2 74 47 23.
Fax: (370 5) 2 74 47 31.
or emailed to: environment@vgtu.lt
Instructions to Authors
The Journal publishes original unpublished research articles in Lithuanian, English, German and Russian languages.
Manuscript is must prepared in MS Word editor and of Times New Roman type. The text of the manuscript should be printed in Single interval on pages of 210x297 mm format: with margins of 20 mm from right and left and 26 mm from top and bottom. Typical volume of the manuscript usually varies from 8 to 12 edited pages. The pagination is made by an ordinary pencil. The author(s) must sign the second copy of the manuscript (at the end, below information about author(s)).
A manuscript should include the following parts: title, the author’s first and last names, name and address of representing institution (different institutions represented by the authors are recorded in foot-notes), emails of each author, summary (in the same language in which the manuscript’s text is prepared), keywords. Text of a manuscript should include: 1. Introduction (review of related literature, aim of the work), 2. Methods (comprehensive description of methods, sampling site description, sample processing, equipment and statistical analysis), 3. Results and discussion (discussion about results and theoretic reasoning, ect.), 4. Conclusions, Acknowledgements, References, abstracts in other two languages (if manuscript is in Lithuanian, the other abstracts should be in English and Russian; if manuscript is in English, the other abstracts should be in Lithuanian and Russian; if manuscript is in Russian, the other abstracts should be in Lithuanian and English; if manuscript is in German, the other abstracts should be in Lithuanian and English) (above each abstract the title and authors and below abstract the keywords should be printed), information about each author (first and last names, institution, publications, research fields). The author for correspondence should be presented: his first and last names, his institution, contact phone, email.
The title of the article should be printed 60 mm below the sheet top by capital letters of 12 pt Bold type and centered. There is a Single line interval between the title and the author’s name. The names and surnames of the author or co-authors should be printed by small letters of 11 pt Bold type and centered. Below the author’s surname, the name of institution (represented by the author or co-authors) is printed in 10 pt Italic, its address, the author’s E-mail are written and centered.
Abstract and keywords are printed in Single interval of 9 pt type in one column and after the institution address the margins of 30 mm and interval of three lines below the institution address are left. Words Abstract and Keywords are printed in Bold. The volume of the abstract cannot be less than 1 000 and no more than 1 600 typographic signs (including spaces). Between the abstract and keywords there should be an interval of one line. The keywords should be limited to 8 items.
Introduction, main text and conclusions are to be printed in 10 pt type Single interval into two columns at the distance of 1 line from keywords. Between the two columns a space of 6 mm is to be left. The first line of the paragraph is to be shifted by 7 mm from the left margin. The last page of the article is to be filled not less than by 70%. The titles of introduction, chapters and sub-chapters are printed by small letters in 10 pt Bold-Regular type and aligned left. The introduction, titles of chapters and conclusions are numbered by one Arabic numeral and sub-chapters by two numerals. The titles of chapters and sub-chapters should be separated from the text by one-line interval.
Mathematical dependences, their notations in the text and other symbols should be written in Equation Editor 3 Italic 10 pt type, the indexes by 7 pt, subindexes by 6 pt. Matrices are written in square brackets. All the numerals, including index numbers, are presented in Regular type. Formulas are centered. They are numbered by Arabic numerals in round brackets and aligned right. Between a formula and text there should be an interval of one line.
Figures and tables should be put in the place where they are mentioned; and they are centered. Larger tables and figures may be put at the top of a sheet or at the bottom across the whole breadth. Figures are drawn by computer and additionally presented by one of these fails: *.jpg, *.tif, *.wmf or *.pcx. Photos (colored and black-and-white type) should be of good quality, clear and suitable for reproduction. The numbers of figures and tables (for instance, Fig 1, Table 3) and inscriptions below are written in 9 pt of Regular type. Figures and tables are separated from the text by one-line interval.
References. The list of references (more than 20) is given after conclusions. The word References is spelled in small letters of 10 pt Bold-Regular type on the left side and the list of references in 9 pt. The references are to be presented according to the rules.
Editorial Board has a right to not accept submission, if it does not comply with above mentioned requirements. When submitting the revised manuscript must follow with explanations regarding changes made according to reviewers remarks on a separate sheet of paper signed by corresponding author.
All that You need for submission of Your manuscript:
Send electronic version of Your manucsript to environment@vgtu.lt
Fill in the Covering letter, and together with
1 hard copy of Your manuscript with original signatures of all authors, and
Filled the licensed contract (in Russian, in English) send to:
Prof Dr Habil Pranas BaltrÄ—nas, Journal Environmental Engineering and Landscape Management, Dept Environmental Protection, Vilnius Gediminas Technical University, SaulÄ—tekis al. 11, LT-10223, Vilnius-40, Lithuania
Editorial Board
PRESIDIUM
Prof Dr Habil Pranas BALTRÄ–NAS (Editor-in-Chief), Vilnius Gediminas Technical University (VGTU), SaulÄ—tekio al. 11, LT-10223 Vilnius-40, Lithuania
Prof Dr Habil Donatas BUTKUS (Physical and Technological Environmental Impacts Control and Reduction Technologies), Vilnius Gediminas Technical University (VGTU), SaulÄ—tekio al. 11, LT-10223 Vilnius-40, Lithuania
Prof Dr Habil Dmitrijus STYRA (Nuclear Hydrophysics and Radioactive Pollution), Vilnius Gediminas Technical University (VGTU), SaulÄ—tekio al. 11, LT-10223 Vilnius-40, Lithuania
Assoc Prof Dr Saulius VASAREVIÄŒIUS (Waste Management, Environmental Management, Modeling of Environmental Processes), Vilnius Gediminas Technical University (VGTU), SaulÄ—tekio al. 11, LT-10223 Vilnius-40, Lithuania
Dr Edita BALTRÄ–NAITÄ– (Managing Editor), Vilnius Gediminas Technical University (VGTU), SaulÄ—tekio al. 11, LT-10223 Vilnius-40, Lithuania, environment@vgtu.lt
IINTERNATIONAL EDITORIAL BOARD
Prof Dr Habil Valentinas BALTRŪNAS, Institute of Geology and Geography, T. Å evÄenkos g. 13, LT-03223 Vilnius-6, Lithuania
Dr-Ing Wolfgang BEGLER, MBU-GmbH, Joachim-Jungius Str. 9, 18059 Rostok, Germany
Prof Dr Habil Dagnija BLUMBERGA, Riga Technical University, Kronvalda boulvard 1, Riga, LV-1010, Latvia
Dr Colin A. BOOTH, University of Wolverhampton, Wulfruna Street, Wolverhampton WV1 1LY, UK
Dr Habil Algimantas BUBULIS, Kaunas University of Technology. KÄ™stuÄio g. 27��?04, LT-44025 Kaunas, Lithuania.
Prof. Dr Arūnas BUKANTIS, Vilnius University. M. K. Čiurliono 21/27, LT-01513 Vilnius, Lithuania.
Dr William J. COUCH, Warsaw University, Przechodnia 2/m 1518, 01-100 Warsaw, Poland
Prof Dr Kevin CROKE, University of Illinois, 2121 Taylor, Chicago IL, USA
Dr Alexander DASHKOVSKY, Stock Company Ukranalyt, 6 Tverskaya str., 03680 GSP, Kiev, Ukraine
Dr. Sc. Ing Janis DOLACIS, Latvian State Institute of Wood Chemistry, Dzerbenes St. 27, Riga LV 1006, Latvia
Dr Arūnas K. DRAUGELIS, U.S. Environmental Protection Agency, Region 5, 77 W. Jackson Blvd., Illinois 60604, USA
Prof Dr-Ing Klaus-Diter FRÖHNER, Hamburg-Harburg Technical University, Eißendorfer Str. 40, D-21073 Hamburg, Germany
Assoc Prof Dr Aloyzas GIRGŽDYS, Vilnius Gediminas Technical University (VGTU), Saulėtekio al. 11, LT-10223 Vilnius-40, Lithuania
Prof Dr Avi GOLAN-GOLDHIRSH, Ben-Gurion University of the Negev, Sede Boqer Campus, 84990, Israel.
Prof Dr Habil Janis GRAVITIS, Latvian State Institute of Wood Chemistry, Dzerbenes St. 27, Riga LV 1006, Latvia
Prof Dr Habil Marat IBRAGIMOV, Moscow State Open University, P. Korchagina 22, 129805 Moscow, Russia
Prof Dr Habil Boris JURMANOV, St. Petersburg State University of Architecture and Civil Engineering, 2-nd Krasnoarmeiskaja St., 4, 198005 St. Petersburg, Russia
Prof Dr Habil Algimantas KAZRAGIS, Vilnius Gediminas Technical University (VGTU), SaulÄ—tekio al. 11, LT-10223 Vilnius-40, Lithuania
Prof Dr Danuta KORADECKA, Central Institute for Labour Protection, Czerniakowska 16, 00-701 Warsaw, Poland
Prof Dr Habil Jurij KRASOVICKIJ, Voronezh Technological Academy, Revoliuciji 19, 394017 Voronezh, Russia
Prof Dr Habil Antanas LAUKAITIS, Institute of Thermal Insulation, Linkmenų g. 28, LT-08217 Vilnius-42, Lithuania
Prof Dr Luis Texeira LEMOS, Polytechnic Institute of Viseu, Av. José Maria Vale de Andrade, Campus Politécnico, 3504-510 Viseu, Portugal
Prof. Dr Arvydas LIETUVNINKAS. Tomsk State University. Lenino av 36, 634050, Tomsk, Russia.
Prof Dr Habil Danutė MARČIULIONIENĖ, Lithuanian Institute of Botany, Žaliųjų ežerų 49, Vilnius, Lithuania
Prof Dr-Ing Herbert MÄRKL, Hamburg-Harburg Technical University, Denickestraße Str. 15, D-21071 Hamburg, Germany
Prof Dr Habil Evgueni MARTCHENKO, Moscow State Open University, P. Korchagina 22, 129805 Moscow, Russia
Prof Dr Habil Konstantinas JAKOVLEVAS-MATECKIS, Vilnius Gediminas Technical University (VGTU), SaulÄ—tekio al. 11, LT-10223 Vilnius-40, Lithuania
Prof Dr Habil Vytautas MARTINAITIS, Vilnius Gediminas Technical University (VGTU), SaulÄ—tekio al. 11, LT-10223 Vilnius-40, Lithuania
Prof. Dr Habil Jonas MAŽEIKA. Nature Research Centre. Akademijos g. 2, LT-08412 Vilnius, Lithuania.
Prof Dr Erio PASQUALINI, University of Ancona Italy, Via Brecce Bianche I-60131 Ancona, Italy
Dr Wolfgang PROBST, Datakustik GmbH, Gewerbering 5, D-86926 Greifenberg, Germany
Prof. Dr Leonid RIKHVANOV. Tomsk Polytechnic University. Lenino av 30, 634050, Tomsk, Russia.
Doc. Dr Mindaugas RIMEIKA, Vilnius Gediminas Technical University, SaulÄ—tekio al. 11, LT-10223 Vilnius, Lithuania.
Prof Dr Habil Oleg RUSAK, St. Petersburg Forestry Academy, Institutski 5, 194018 St. Petersburg, Russia
Dr. Yury Alexandrovich SAPOZHNIKOV, Chemical Department, Radiochem Division, Lomonosov Moscow State University, 119992, Moscow, Russia
Prof Dr Habil Birzhan SHAKIROV, South-Kazakhstan State University named after M. Auezov, 5 Tauke-khan prospect, Shimkent, Republic of Kazakhstan
Prof Dr Bal Ram SINGH, Norwegian University of Life Sciences, P.O. Box 5003, N-1432 Ã…s, Norway
Prof Dr Habil Povilas Algimantas SIRVYDAS, Lithuanian University of Agriculture, Studentų g. 11, Noreikiškės, LT-53361 Kauno r., Lithuania
Prof Dr Brian SPALDING, Concentration, Heat & Momentum Limited, Bakery House, 40 High Street, Wimbeldon Village, London SW 19 5AU, England
Prof Dr Habil Vida STRAVINSKIENÄ–, Vytautas Magnus University, K. DonelaiÄio g. 58, LT 44248, Kaunas, Lithuania
Assoc Prof Dr Dovydas ŠČUPAKAS, State Environmental Health Center, Kalvarijų g. 153-304, LT-08221 Vilnius-42, Lithuania
Prof Dr Habil Rimvydas TUMAS, Lithuanian University of Agriculture, Studentų g. 11, Noreikiškės, LT-53361 Kauno r., Lithuania
Prof. Dr Xavier UBEDA. University of Barcelona. Montalegre 6, 08001, Barselona, Spain.
Prof Dr Federico G. A. VAGLIASINDI, University of Catania, Viale A. Doria 6, 95125, Catania, Italy.
Prof Dr Habil Petras VAITIEKŪNAS, Vilnius Gediminas Technical University (VGTU), Saulėtekio al. 11, LT-10223 Vilnius-40, Lithuania
Prof Dr Arnold VALDBERG, NIIOGAZ State Research Institute of Industrial and Sanitary Gas Cleaning, The 1-st Nagatinsky Passage 6, 113105 Moscow, Russia
Prof Dr Habil Vytenis ZABUKAS, Klaipėda University, Bijūnų g. 17, LT-91225 Klaipėda, Lithuania
| 
