期刊名称：MOLECULAR GENETICS AND GENOMICS
 期刊简介(About the journal)
投稿须知(Instructions to Authors)
编辑部信息(Editorial Board)
About the journal
Molecular Genetics and Genomics
Molecular Genetics and Genomics publishes original research and reviews in all areas of general and molecular genetics developmental genetics, somatic cell genetics and genetic engineering irrespective of the organism involved.
|
Articles on animal or plant breeding or human genetics are only published if the results are of significance for basic genetic research. Longer tracts of sequence data will not be printed but may be published as Electronic Supplementary Material (see special instructions in Molecular Genetics and Genomics). |
 |
Abstracted/Indexed in:
Abstracts in Anthropology, Academic OneFile, Academic Search, AGRICOLA, Biochemistry and Biophysics Citation Index, Biological Abstracts, Biological and Agricultural Index, BIOSIS, Biotechnology Citation Index, CAB Abstracts, CAB International, Chemical Abstracts Service (CAS), CSA/Proquest, Current Abstracts, Current Awareness in Biological Sciences (CABS), Current Contents/ Life Sciences, Elsevier Biobase, EMBASE, EMBiology, Food Science and Technology Abstracts, Gale, Global Health, Google Scholar, IBIDS, Journal Citation Reports/Science Edition, OCLC, OmniFile, PubMed/Medline, Science & Technology Collection, Science Citation Index, Science Citation Index Expanded (SciSearch), Science Select, SCOPUS, Summon by Serial Solutions, TOC Premier, VINITI - Russian Academy of Science, Zoological Record
Instructions to Authors
Types of papers
Molecular Genetics and Genomics publishes Reviews and Original Papers. Manuscripts for Reviews are usually solicited by the Reviews Editor, but suggestions from authors are encouraged. All submitted manuscripts undergo a rigorous, fair and rapid peer-review.
Manuscript submission
Manuscript Submission
Submission of a manuscript implies: that the work described has not been published before; that it is not under consideration for publication anywhere else; that its publication has been approved by all co-authors, if any, as well as by the responsible authorities – tacitly or explicitly – at the institute where the work has been carried out. The publisher will not be held legally responsible should there be any claims for compensation.
Permissions
Authors wishing to include figures, tables, or text passages that have already been published elsewhere are required to obtain permission from the copyright owner(s) for both the print and online format and to include evidence that such permission has been granted when submitting their papers. Any material received without such evidence will be assumed to originate from the authors.
Online Submission
Authors should submit their manuscripts online. Electronic submission substantially reduces the editorial processing and reviewing times and shortens overall publication times. Please follow the hyperlink “Submit online” on the right and upload all of your manuscript files following the instructions given on the screen.
Specific remarks
Manuscript submission
Please submit your manuscripts at http://mc.manuscriptcentral.com/mgg.
1. Prepare your manuscript according to the detailed instructions below.
2. Go to http://mc.manuscriptcentral.com/mgg and log on using your User-ID and password. If you are a first-time user, click on “Create Account. If you have forgotten your User-ID and/or password, click on “Password Help” or contact the Editorial Office (editor@molecular-genetics-genomics.se).
3. Go to the “Author Center” and follow the instructions on screen that will guide you through a series of steps to enter all required information.
4. Upload your manuscript as a single Microsoft Word file or PDF file with all tables and figures inserted/imported. If this is not possible, submit text and figures as separate files. The system will guide you through steps to generate a single pdf file for reviewing purposes. Note that PDF files cannot be used for production of the accepted manuscript and source files are required at that stage. See further instructions how to prepare manuscript files below.
No hard copy of the manuscript is required.
5. Peer reviewing will be supervised by the Editorial Office and an appropriate Associate Editor.
6. The Editorial Office will confirm your successful submission by E-mail and contact you as soon as a decision on your manuscript has been taken.
7. When you submit your revised manuscript, please upload ALL source files (even if some of them were not altered). If your manuscript is then accepted, those files will be used directly for production.
- Introduction
The introduction should guide the reader and hence contain the following:
• A short introduction to the field of research
• The scope and incentives of the work
• The background, i.e. previous work by your and other research groups strictly on the subject
• A conclusion summarizing the novelty and the significance of this paper.
Make sure that the introduction focuses on the background that is relevant for the data presented and the conclusions drawn.
- Materials and Methods
This section should provide sufficient information to precisely evaluate how the data have been obtained, including the number of repetitions, and should permit a different research group to repeat the experimental work.
- Results
Data should be presented as precisely and concisely as possible, if appropriate in the form of tables or figures.
Make sure not to repeat in the text values given in figures or tables.
The data presentation should follow a logical flow starting with a short description of the incentive of the experiment, followed by a description of the results. Do not repeat information on the experimental details; those belong to Materials and Methods. Describe and discuss the data, but interpretations and conclusions should be given in the Discussion. Avoid combining Results and Discussion: separate Results and Discussion sections make for easier reading and a better structure of your article.
- Discussion
The discussion should cover the following aspects:
• An interpretation of the results and their significance with reference to previous work.
• A description how the data advance the state-of-the-art
• The importance of the findings for the research field
• Any models realistically emerging from the data presented
• Implications for future research
Avoid repeating Introduction or Results.
Title page
Title Page
The title page should include:
- The name(s) of the author(s)
- A concise and informative title
- The affiliation(s) and address(es) of the author(s)
- The e-mail address, telephone and fax numbers of the corresponding author
Abstract
Please provide an abstract of 150 to 250 words. The abstract should not contain any undefined abbreviations or unspecified references.
Keywords
Please provide 4 to 6 keywords which can be used for indexing purposes.
Text
Text Formatting
Manuscripts should be submitted in Word.
- Use a normal, plain font (e.g., 10-point Times Roman) for text.
- Use italics for emphasis.
- Use the automatic page numbering function to number the pages.
- Do not use field functions.
- Use tab stops or other commands for indents, not the space bar.
- Use the table function, not spreadsheets, to make tables.
- Use the equation editor or MathType for equations.
Note: If you use Word 2007, do not create the equations with the default equation editor but use the Microsoft equation editor or MathType instead.
- Save your file in doc format. Do not submit docx files.
Manuscripts with mathematical content can also be submitted in LaTeX.
Headings
Please use no more than three levels of displayed headings.
Abbreviations
Abbreviations should be defined at first mention and used consistently thereafter.
Footnotes
Footnotes can be used to give additional information, which may include the citation of a reference included in the reference list. They should not consist solely of a reference citation, and they should never include the bibliographic details of a reference. They should also not contain any figures or tables.
Footnotes to the text are numbered consecutively; those to tables should be indicated by superscript lower-case letters (or asterisks for significance values and other statistical data). Footnotes to the title or the authors of the article are not given reference symbols.
Always use footnotes instead of endnotes.
Acknowledgments
Acknowledgments of people, grants, funds, etc. should be placed in a separate section before the reference list. The names of funding organizations should be written in full.
Scientific style
- Genus and species names should be in italics.
Nomenclature abbreviations
Those should follow the rules and recommendations of the IUPAC-IUB Commission on Biochemical Nomenclature (CBN) and of the IUB Commission of Editors of Biochemical Journals (CEBJ). Genus or species names, gene symbols, mathematical formulae and any other words to be given special emphasis should be underlined once for italics. Similar signs have to be clearly distinguished, e.g. 1 (one) and I (letter), or 0 (zero) and O (letter).
Sequence/nucleotide data
New nucleotide data must be submitted and deposited in the DDBJ/EMBL/GenBank databases and an accession number obtained before the paper can be accepted for publication. Submission to any one of the three collaborating databanks is sufficient to ensure data entry in all. The accession number should be included in the manuscript e.g. as a footnote on the title page:
'Note: Nucleotide sequence data reported are available in the DDBJ/EMBL/GenBank databases under the accession numbers(s)----'.
If requested the database will withhold release of data until publication.
The most convenient method for submitting sequence data is by World Wide Web:
- EMBL via Webin: http://www.ebi.ac.uk/embl/Submission/webin.html
- GenBank via Bankit: http://www.ncbi.nlm.nih.gov/BankIt/
- DDBJ via Sakura: http://sakura.ddbj.nig.ac.jp/
Alternatively, the stand-alone submission tool 'Sequin' is available from the EBI at http://www3.ebi.ac.uk/Services/Sequin and from NCBI at http://www.ncbi.nlm.nih.gov/Sequin/
For special types of submissions (e.g. genomes, bulk submissions etc) additional submission systems are available from the above sites.
Database Contact Information:
- EMBL:
EMBL Nucleotide Sequence Submissions
European Bioinformatics Institute,
Wellcome Trust Genome Campus, Hinxton,
Cambridge CB10 1SD U.K.;
Tel.: +44-1223-494400; Fax: +44-1223-494472;
e-mail: datasubs@ebi.ac.uk
WWW URL: http://www.ebi.ac.uk
- GenBank:
National Center for Biotechnology Information,
National Library of Medicine, Bldg. 38A, Rm 8N-803
Bethesda, MD 20894, USA
Tel.: +1-301-4962475; Fax: +1-301-4809241
e-mail: info@ncbi.nlm.nih.gov
WWW URL: htpp://www.ncbi.nlm.nih.gov
- DDBJ:
Center for Information Biology and DNA Data Bank of Japan
National Institute of Genetics, 111 Yata,
Mishima, Shizuoka 411-8540, Japan;
Tel.: +81-559-816853; Fax: +81-559-816849;
e-mail: ddbj@ddbj.nig.ac.jp
WWW URL: http://www.ddbj.nig.ac.jp.
Expression data
MGG requires microarray data to be reported in accordance with the MIAME standards and this to be clearly documented in the Materials and Methods section. Please refer to http://www.mged.org/. In addition, expression data should be deposited in a relevant repository such as:
Gene expression omnibus: http://www.ncbi.nlm.nih.gov/geo/
EBI Microarray Databases: http://www.ebi.ac.uk/Databases/microarray.html
Center for Information Biology gene EXpression database: http://cibex.nig.ac.jp/
Submission should be documented in the manuscript.
References
Citation
Cite references in the text by name and year in parentheses. Some examples:
- Negotiation research spans many disciplines (Thompson 1990).
- This result was later contradicted by Becker and Seligman (1996).
- This effect has been widely studied (Abbott 1991; Barakat et al. 1995; Kelso and Smith 1998; Medvec et al. 1993).
Reference list
The list of references should only include works that are cited in the text and that have been published or accepted for publication. Personal communications and unpublished works should only be mentioned in the text. Do not use footnotes or endnotes as a substitute for a reference list.
Reference list entries should be alphabetized by the last names of the first author of each work.
- Journal article
Gamelin FX, Baquet G, Berthoin S, Thevenet D, Nourry C, Nottin S, Bosquet L (2009) Effect of high intensity intermittent training on heart rate variability in prepubescent children. Eur J Appl Physiol 105:731-738. doi: 10.1007/s00421-008-0955-8
Ideally, the names of all authors should be provided, but the usage of “et al” in long author lists will also be accepted:
Smith J, Jones M Jr, Houghton L et al (1999) Future of health insurance. N Engl J Med 965:325–329
- Article by DOI
Slifka MK, Whitton JL (2000) Clinical implications of dysregulated cytokine production. J Mol Med. doi:10.1007/s001090000086
- Book
South J, Blass B (2001) The future of modern genomics. Blackwell, London
- Book chapter
Brown B, Aaron M (2001) The politics of nature. In: Smith J (ed) The rise of modern genomics, 3rd edn. Wiley, New York, pp 230-257
- Online document
Cartwright J (2007) Big stars have weather too. IOP Publishing PhysicsWeb. http://physicsweb.org/articles/news/11/6/16/1. Accessed 26 June 2007
- Dissertation
Trent JW (1975) Experimental acute renal failure. Dissertation, University of California
Always use the standard abbreviation of a journal’s name according to the ISSN List of Title Word Abbreviations, see
.
For authors using EndNote, Springer provides an output style that supports the formatting of in-text citations and reference list.
Tables
- All tables are to be numbered using Arabic numerals.
- Tables should always be cited in text in consecutive numerical order.
- For each table, please supply a table caption (title) explaining the components of the table.
- Identify any previously published material by giving the original source in the form of a reference at the end of the table caption.
- Footnotes to tables should be indicated by superscript lower-case letters (or asterisks for significance values and other statistical data) and included beneath the table body.
Artwork
For the best quality final product, it is highly recommended that you submit all of your artwork – photographs, line drawings, etc. – in an electronic format. Your art will then be produced to the highest standards with the greatest accuracy to detail. The published work will directly reflect the quality of the artwork provided.
Electronic Figure Submission
- Supply all figures electronically.
- Indicate what graphics program was used to create the artwork.
- For vector graphics, the preferred format is EPS; for halftones, please use TIFF format. MS Office files are also acceptable.
- Vector graphics containing fonts must have the fonts embedded in the files.
- Name your figure files with "Fig" and the figure number, e.g., Fig1.eps.
Line Art
- Definition: Black and white graphic with no shading.
- Do not use faint lines and/or lettering and check that all lines and lettering within the figures are legible at final size.
- All lines should be at least 0.1 mm (0.3 pt) wide.
- Scanned line drawings and line drawings in bitmap format should have a minimum resolution of 1200 dpi.
- Vector graphics containing fonts must have the fonts embedded in the files.
Halftone Art
- Definition: Photographs, drawings, or paintings with fine shading, etc.
- If any magnification is used in the photographs, indicate this by using scale bars within the figures themselves.
- Halftones should have a minimum resolution of 300 dpi.
Combination Art
- Definition: a combination of halftone and line art, e.g., halftones containing line drawing, extensive lettering, color diagrams, etc.
- Combination artwork should have a minimum resolution of 600 dpi.
Color Art
- Color art is free of charge for online publication.
- If black and white will be shown in the print version, make sure that the main information will still be visible. Many colors are not distinguishable from one another when converted to black and white. A simple way to check this is to make a xerographic copy to see if the necessary distinctions between the different colors are still apparent.
- If the figures will be printed in black and white, do not refer to color in the captions.
- Color illustrations should be submitted as RGB (8 bits per channel).
Figure Lettering
- To add lettering, it is best to use Helvetica or Arial (sans serif fonts).
- Keep lettering consistently sized throughout your final-sized artwork, usually about 2–3 mm (8–12 pt).
- Variance of type size within an illustration should be minimal, e.g., do not use 8-pt type on an axis and 20-pt type for the axis label.
- Avoid effects such as shading, outline letters, etc.
- Do not include titles or captions within your illustrations.
Figure Numbering
- All figures are to be numbered using Arabic numerals.
- Figures should always be cited in text in consecutive numerical order.
- Figure parts should be denoted by lowercase letters (a, b, c, etc.).
- If an appendix appears in your article and it contains one or more figures, continue the consecutive numbering of the main text. Do not number the appendix figures, "A1, A2, A3, etc." Figures in online appendices (Electronic Supplementary Material) should, however, be numbered separately.
Figure Captions
- Each figure should have a concise caption describing accurately what the figure depicts. Include the captions in the text file of the manuscript, not in the figure file.
- Figure captions begin with the term Fig. in bold type, followed by the figure number, also in bold type.
- No punctuation is to be included after the number, nor is any punctuation to be placed at the end of the caption.
- Identify all elements found in the figure in the figure caption; and use boxes, circles, etc., as coordinate points in graphs.
- Identify previously published material by giving the original source in the form of a reference citation at the end of the figure caption.
Figure Placement and Size
- When preparing your figures, size figures to fit in the column width.
- For most journals the figures should be 39 mm, 84 mm, 129 mm, or 174 mm wide and not higher than 234 mm.
- For books and book-sized journals, the figures should be 80 mm or 122 mm wide and not higher than 198 mm.
Permissions
If you include figures that have already been published elsewhere, you must obtain permission from the copyright owner(s) for both the print and online format. Please be aware that some publishers do not grant electronic rights for free and that Springer will not be able to refund any costs that may have occurred to receive these permissions. In such cases, material from other sources should be used.
Accessibility
In order to give people of all abilities and disabilities access to the content of your figures, please make sure that
- All figures have descriptive captions (blind users could then use a text-to-speech software or a text-to-Braille hardware)
- Patterns are used instead of or in addition to colors for conveying information (color-blind users would then be able to distinguish the visual elements)
- Any figure lettering has a contrast ratio of at least 4.5:1
Electronic Supplementary Material
Springer accepts electronic multimedia files (animations, movies, audio, etc.) and other supplementary files to be published online along with an article or a book chapter. This feature can add dimension to the author's article, as certain information cannot be printed or is more convenient in electronic form.
Submission
- Supply all supplementary material in standard file formats.
- Please include in each file the following information: article title, journal name, author names; affiliation and e-mail address of the corresponding author.
- To accommodate user downloads, please keep in mind that larger-sized files may require very long download times and that some users may experience other problems during downloading.
Audio, Video, and Animations
- Always use MPEG-1 (.mpg) format.
Text and Presentations
- Submit your material in PDF format; .doc or .ppt files are not suitable for long-term viability.
- A collection of figures may also be combined in a PDF file.
Spreadsheets
- Spreadsheets should be converted to PDF if no interaction with the data is intended.
- If the readers should be encouraged to make their own calculations, spreadsheets should be submitted as .xls files (MS Excel).
Specialized Formats
- Specialized format such as .pdb (chemical), .wrl (VRML), .nb (Mathematica notebook), and .tex can also be supplied.
Collecting Multiple Files
- It is possible to collect multiple files in a .zip or .gz file.
Numbering
- If supplying any supplementary material, the text must make specific mention of the material as a citation, similar to that of figures and tables.
- Refer to the supplementary files as “Online Resource”, e.g., "... as shown in the animation (Online Resource 3)", “... additional data are given in Online Resource 4”.
- Name the files consecutively, e.g. “ESM_3.mpg”, “ESM_4.pdf”.
Captions
- For each supplementary material, please supply a concise caption describing the content of the file.
Processing of supplementary files
- Electronic supplementary material will be published as received from the author without any conversion, editing, or reformatting.
Accessibility
In order to give people of all abilities and disabilities access to the content of your supplementary files, please make sure that
- The manuscript contains a descriptive caption for each supplementary material
- Video files do not contain anything that flashes more than three times per second (so that users prone to seizures caused by such effects are not put at risk)
After acceptance
Upon acceptance of your article you will receive a link to the special Author Query Application at Springer’s web page where you can sign the Copyright Transfer Statement online and indicate whether you wish to order OpenChoice, offprints, or printing of figures in color.
Once the Author Query Application has been completed, your article will be processed and you will receive the proofs.
Open Choice
In addition to the normal publication process (whereby an article is submitted to the journal and access to that article is granted to customers who have purchased a subscription), Springer provides an alternative publishing option: Springer Open Choice. A Springer Open Choice article receives all the benefits of a regular subscription-based article, but in addition is made available publicly through Springer’s online platform SpringerLink. We regret that Springer Open Choice cannot be ordered for published articles.
Copyright transfer
Authors will be asked to transfer copyright of the article to the Publisher (or grant the Publisher exclusive publication and dissemination rights). This will ensure the widest possible protection and dissemination of information under copyright laws.
Open Choice articles do not require transfer of copyright as the copyright remains with the author. In opting for open access, they agree to the Springer Open Choice Licence.
Offprints
Offprints can be ordered by the corresponding author.
Color illustrations
Online publication of color illustrations is free of charge. For color in the print version, authors will be expected to make a contribution towards the extra costs.
Proof reading
The purpose of the proof is to check for typesetting or conversion errors and the completeness and accuracy of the text, tables and figures. Substantial changes in content, e.g., new results, corrected values, title and authorship, are not allowed without the approval of the Editor.
After online publication, further changes can only be made in the form of an Erratum, which will be hyperlinked to the article.
Online First
The article will be published online after receipt of the corrected proofs. This is the official first publication citable with the DOI. After release of the printed version, the paper can also be cited by issue and page numbers.
Integrity of research and reporting
Ethical standards
Manuscripts submitted for publication must contain a declaration that the experiments comply with the current laws of the country in which they were performed. Please include this note in a separate section before the reference list.
Conflict of interest
All benefits in any form from a commercial party related directly or indirectly to the subject of this manuscript or any of the authors must be acknowledged. For each source of funds, both the research funder and the grant number should be given. This note should be added in a separate section before the reference list.
If no conflict exists, authors should state: The authors declare that they have no conflict of interest.
Instructions to Authors
1617-4615.pdf
Editorial Board
Chief Editor
Stefan Hohmann
Molecular Genetics and Genomics
Department of Cell and Molecular Biology
University of Gothenburg
Box 462
SE-405 30 Gothenburg (Göteborg)
Sweden
E-mail: editor@molecular-genetics-genomics.se
Tel.: +46 31 360 8488
Fax: +46 31 786 2599
Reviews Editor
Jochen Graw
Helmoltz Center Munich
German Research Center for Environmental Health
Institute of Developmental Genetics
Ingolstädter Landstr. 1
85764 Neuherberg
Germany
E-mail: graw@helmholtz-muenchen.de
Editors
Andrés Aguilera
Departamento de Genética
Universidad de Sevilla
Sevilla, Spain
Transcription, DNA repair and recombination
Dan Andersson
Uppsala Biomedical Center
Uppsala University
Uppsala, Sweden
Bacterial genetics and evolution, antibiotic resistance
Leif Andersson
Uppsala Biomedical Center
Uppsala University
Uppsala, Sweden
Comparative genomics, genetics, phenotype evolution, domestic animals
Thomas S. Becker
University of Sydney
Sydney NSW, Australia
Vertebrate developmental genetics and genomics
Thomas Clandinin
Stanford University
Stanford, USA
Drosophila genetics, neurobiology, visual system
Martine Collart
Dpt. Biochimie Médical
University of Geneva
Geneva , Switzerland
Signal transduction, transcription and stress responses in yeast
Carol Dieckmann
Department of Biochemistry and Molecular Biophysics
University of Arizona
Tucson, Arizona, USA
Mitochondria, organelles, yeast, Chlamydomonas, RNA processing and turnover
Reinhard Fischer
University of Karlsruhe
Institute for Applied Life Sciences
Applied Microbiology
Karlsruhe, Germany
Filamentous fungi, development of fungi, polarized growth, microtubules and motors, light sensing
Christiane Gebhardt
Max Planck Institute for Plant Breeding Research
Cologne, Germany
Molecular population genetics, Solanaceae, pathogen resistance, genetics of plant carbohydrates
Michel Georges
Faculty of Veterinary Medicine, University of Liège
Liège, Belgium
Animal breeding
Marie-Angèle Grandbastien
Laboratoire de Biologie Cellulaire
INRA
Versailles, France
Plant transposable elements and plant genome structure
Rudolf Hagemann
Institut für Genetik
Martin-Luther-Universität
Halle (Saale), Germany
Plastid and mitochondrial genetics, molecular genetics in plant breeding
Matthias Hammerschmidt
Institute for Developmental Biology
Center for Molecular Medicine Cologne (CMMC)
University of Cologne
Cologne, Germany
Zebrafish genetics and development, BMP signaling, cell migration, pituitary, skin
Michael Hecker
Ernst-Moritz-Arndt-University Greifswald
Institute for Microbiology
Department of Microbial Physiology
Greifswald, Germany
Microbial physiology and molecular microbiology, gene regulation, physiological proteomics
Siegfried Hekimi
Biology Department
McGill University
Montréal, Québec, Canada
Molecular and general genetics of Caenorhabditis elegans
Ann M. Hirsch
Department of Molecular, Cell and Developmental Biology
University of California
Los Angeles, USA
Biological nitrogen fixation, genetics of plant-microbe interactions, plant and bacterial gene regulation
Takashi Ito
Department of Computational Biology
The University of Tokyo
Kashiwa, Japan
Yeast, functional genomics, proteomics, protein-protein interaction, DNA methylation
Edda Klipp
Theoretical Biophysics
Humboldt-University Berlin
Berlin, Germany
Computational systems biology, dynamic simulation, signal transduction, cell cycle, metabolism
Gabriele Klug
Institut für Mikrobiologie und Molekularbiologie
Justus-Liebig-Universität Giessen
Giessen, Germany
Gene regulation in bacteria, RNA processing in prokaryotes, oxidative stress defense in bacteria
Franz Lang
Canadian Institute for Advanced Research
Départment de Biochimie
Université de Montréal
Montréal, Canada
Mitochondrial and nuclear genomes, protists, fungi, RNA structure, bioformatics
José Perez-Martin
Department of Microbial Biotechnology
Centro Nacional de Biotecnologia CSIC
Madrid, Spain
Fungal genetics, cell cycle and morphogenesis control in fungi, pathogenic fungi
Thomas Nyström
CMB Microbiology
University of Gothenburg
Gothenburg (Göteborg), Sweden
Microbial genetics, Microbial stress responses, aging, protein quality control
Stig Omholt
CIGENE
Norwegian University of Life Sciences
Ås, Norway
Theoretical biology , genetics , systems biology , mathematical modelling , evoloutionary biology
Christoph Plass
German Cancer Research Center
Division of Toxicology amd Cancer Risk Factors
Heidelberg, Germany
Epigenetics, DNA methylation, cancer genetics
Gunter Reuter
Institut für Genetik
Martin-Luther-Universität
Halle (Saale), Germany
Chromatin regulation and epigenetics
Hans Ronne
Department of Medical Biochemistry and Microbiology
Uppsala University
Uppsala, Sweden
Gene expression and intracellular transport in yeast, metabolic regulation in plants
Frederick P. Roth
BCMP Department
Harvard Medical School
Boston, MA, USA
Genetic interactions, protein interactions, computational genomics
Arp Schnittger
Institut de Biologie Moléculaire des Plantes (IBMP)
Centre National de la Recherche Scientifique (CNRS)
Strasbourg, France
Arabidopsis, cell cycle, gametophyte development, growth control, polyploidy, seed biology
Ken Shirasu
Plant Immunity Research Group
RIKEN Plant Science Center
Yokohama, Japan
Plant immunity
Igor Stagljar
CCBR - Dep. of Biochemistry & Dep. of Medical Genetics and Microbiology
University of Toronto
Toronto, Canada
Functional genomics, proteomics, protein-protein interactions, yeast two-hybrid analysis, drug screens, membrane proteins, genome stability, DNA helicases
Akhilesh K.Tyagi
Interdisciplinary Centre for Plant Genomics
Department of Plant Molecular Biology
University of Delhi
New Delhi, India
Plant genomics, stress, reproductive development
David Ussery
Center for Biological Sequence Analysis
BioCentrum-DTU
The Technical University of Denmark, Lyngby, Denmark
Sequenced bacterial genomes, comparative genomics
Yves Van de Peer
Department of Plant Systems Biology
Ghent University
Ghent, Belgium
Bioinformatics, gene and genome duplication, gene regulation, genome evolution, phylogenetics
Andreas Wagner
Department of Biochemistry
University of Zurich
Zurich, Switzerland
Molecular evolution
Robbie Waugh
SCRI, Invergowrie
Dundee, Scotland, UK
Plant genetics, genomics, (mainly potato and cereals)
Peter Westhoff
Heinrich-Heine-Universität Düsseldorf
Düsseldorf, Germany
Genetics/biogenesis of chloroplasts, genetics/molecular evolution of photosynthesis, functional genomics of crop plants
Masahiro Yano
QTL Genomics Research Center
National Institute of Agrobiological Sciences,
Ibaraki, Japan
Plant genetics and breeding, marker-assisted selection
|
