|
期刊名称：JOURNAL OF MATERIAL CYCLES AND WASTE MANAGEMENT
 期刊简介(About the journal)
投稿须知(Instructions to Authors)
编辑部信息(Editorial Board)
About the journal
Journal of Material Cycles and Waste Management
Official Journal of the Japan Society of Material Cycles and Waste Management (JSMCWM) and the Korea Society of Waste Management (KSWM)
Editors-in-Chief: S.-i. Sakai; T. Yoshioka; Y.-C. Seo
ISSN: 1438-4957 (print version)
ISSN: 1611-8227 (electronic version)
ABOUT THIS JOURNAL
- Offers research in technical, political, and environmental problems of material cycles and waste management
- Contributes to the development of an interdisciplinary science of material cycles and waste management
- Publishes original articles, reviews, and invited papers from a wide range of disciplines
The Journal of Material Cycles and Waste Management has a twofold focus: research in technical, political, and environmental problems of material cycles and waste management; and information that contributes to the development of an interdisciplinary science of material cycles and waste management. Its aim is to develop solutions and prescriptions for material cycles.
The journal publishes original articles, reviews, and invited papers from a wide range of disciplines related to material cycles and waste management.
The journal is published in cooperation with the Japan Society of Material Cycles and Waste Management (JSMCWM) and the Korea Society of Waste Management (KSWM).
Related subjects » Civil Engineering - Environmental Management - Pollution and Remediation
Impact Factor: 0.568 (2012) *
Journal Citation Reports®, Thomson Reuters
Abstracted/Indexed in
Science Citation Index Expanded (SciSearch), Journal Citation Reports/Science Edition, SCOPUS, INSPEC, Chemical Abstracts Service (CAS), Google Scholar, EBSCO, CSA, ProQuest, Academic OneFile, CSA Environmental Sciences, EI Encompass, EMBiology, EnCompassLit, Environment Index, Gale, OCLC, Polymer Library, Referativnyi Zhurnal (VINITI), SCImago, Summon by ProQuest
Popular Content within this publication
| International comparative study of 3R and waste management policy developmentsSakai, Shin-ichi; Yoshida, Hideto; Hirai, Yasuhiro; Asari, Misuzu; Takigami, Hidetaka; Takahashi, Shin; Tomoda, Keijirou; Peeler, Maria Victoria; Wejchert, Jakub; Schmid-Unterseh, Thomas; Douvan, Aldo Ravazzi; Hathaway, Roy; Hylander, Lars D.; Fischer, Christian; Oh, Gil Jong; Jinhui, Li; Chi, Ngo Kim Show all authors (17)Hide authors
|
| An international comparative study of end-of-life vehicle (ELV) recycling systemsSakai, Shin-ichi; Yoshida, Hideto; Hiratsuka, Jiro; Vandecasteele, Carlo; Kohlmeyer, Regina; Rotter, Vera Susanne; Passarini, Fabrizio; Santini, Alessandro; Peeler, Maria; Li, Jinhui; Oh, Gil-Jong; Chi, Ngo Kim; Bastian, Lawin; Moore, Stephen; Kajiwara, Natsuko; Takigami, Hidetaka; Itai, Takaaki; Takahashi, Shin; Tanabe, Shinsuke; Tomoda, Keijiro; Hirakawa, Takashi; Hirai, Yasuhiro; Asari, Misuzu; Yano, Junya Show all authors (24)Hide authors
|
| Sustainability assessment of municipal solid waste management in Sri Lanka: problems and prospectsMenikpura, S. N. M.; Gheewala, Shabbir H.; Bonnet, Sébastien
|
| Utilization of solidified phosphogypsum as Portland cement retarderShen, Weiguo; Gan, Gejin; Dong, Rui; Chen, Hu; Tan, Yu; Zhou, Mingkai Show all authors (6)Hide authors
|
|
Evaluation of entanglement properties of crushed automobile shredded residue and detachment of entrapped particlesKuwayama, Yutaka; Ito, Mayumi; Akatsuka, Maiko; Hiroyoshi, Naoki; Tsunekawa, Masami Show all authors (5)
|
Instructions to Authors
Instructions for Authors
Journal of Material Cycles and Waste Management
Online Submission
Authors should submit
their manuscripts online. Electronic submission substantially reduces the editorial processing and reviewing times and shortens overall publication times. Please follow the
hyperlink “Submit online” on the right and upload all of your manuscript fi les following the instructions given on the screen.
Prerequisites for Publication
With the exception of Review articles, a copy of the certification form included in each issue must be submitted with the manuscript. With Original articles and Notes, the names of two suitable referees may be submitted.
Types of Articles
Articles may be in the form of Original articles, Notes, or Review articles. The length of the text and references for a Review and an Original article should not exceed 5000 words. Original articles are reports of original studies with new and valuable results. Notes are short reports of original studies of limited scope. Review articles are usually invited from selected investigators by the editorial board.
Manuscript Form
A manuscript file containing title page, text, acknowledgements, references, and figure captions should be uploaded.Figures, tables, and electronic supplementary materials should be uploaded as separate files.
Standard abbreviations and units should be used; SI units are recommended. Abbreviations should be defined at first appearance, and their use in the title and abstract should be avoided. Generic names of chemicals should be used. Genus and species names should be typed in italic or, if this is not available, underlined. All manuscripts must be written in English.
Authors who are not fluent in English must seek the assistance of a colleague who is a native English speaker and is familiar with the field of the work. Manuscripts that have been extensively modified in the editorial process will be returned to the authors for retyping.
Manuscript Submission
Submission of a manuscript implies: that the work described has not been published before; that it is not under consideration for publication anywhere else; that its publication has been approved by all co-authors, if any, as well as by the responsible authorities – tacitly or explicitly – at the institute where the work has been carried out. The publisher will not be held legally responsible should there be any claims for compensation.
Permissions: Authors wishing to include figures, tables, or text passages that have already been published elsewhere are required to obtain permission from the copyright owner(s) for both the print and online format and to include evidence that such permission has been granted when submitting their papers. Any material received without such evidence will be assumed to originate from the authors.
Title Page
The title page should include
- The type of article
- The name(s) of the author(s)
- A concise and informative title
- The affiliation(s) and address(es) of the author(s)
- The e-mail address
Abstract: For Original articles and Notes, a concise description (not more than 200 words) of the purpose, methods, results, and conclusions is required. Give only the most essential data. New and important aspects of the research should be emphasized.
Keywords: Please provide 3 to 5 keywords which can be used for indexing purposes.
Text
For Original articles and Notes, the text of experimental articles should be, if possible, divided into the following sections: Introduction, Theory, Materials and methods (or Experimental), Results, Discussion, and
Conclusion.
Text Formatting: Manuscripts should be submitted in Word.
• Use a normal, plain font (e.g., 10-point Times Roman) for text.
• Use italics for emphasis.
• Use the automatic page numbering function to number the pages.
• Do not use field functions.
• Use tab stops or other commands for indents, not the space bar.
• Use the table function, not spreadsheets, to make tables.
• Use the equation editor or MathType for equations.
Note: If you use Word 2007, do not create the equations with the default equation editor but use the Microsoft equation editor or MathType instead.
• Save your file in doc format. Do not submit docx files.
Headings: Please use no more than three levels of displayed headings.
Abbreviations: Abbreviations should be defined at first appearance, and their use in the title and abstract should be avoided.
Footnotes: Footnotes can be used to give additional information, which may include the citation of a reference included in the reference list. They should not consist solely of a reference citation, and they should never include the bibliographic details of a reference. They should also not contain any figures or tables. Footnotes to the text are numbered consecutively; those to tables should be indicated by superscript lower-case letters (or asterisks for significance values and other statistical data). Footnotes to the title or the authors of the article are not given reference symbols. Always use footnotes instead of endnotes.
Acknowledgments: Acknowledgments of people, grants, funds, etc. should be placed in a separate section before the reference list. The names of funding organizations should be written in full.
References
Citation: Reference citations in the text should be identified by numbers in square brackets. Some examples:
1. Negotiation research spans many disciplines [3].
2. This result was later contradicted by Becker and Seligman [5].
3. This effect has been widely studied [1-3, 7]
. Reference list: The list of references should only include works that are cited in the text and that have been published or accepted for publication. Personal communications and unpublished works should only be mentioned in the text. Do not use footnotes or endnotes as a substitute for a reference list. The entries in the list should be numbered consecutively. For papers written in Japanese, follow the style of the second example.
• Journal article
Gamelin FX, Baquet G, Berthoin S, Thevenet D, Nourry C, Nottin S, Bosquet L (2009) Effect of high intensity intermittent training on heart rate variability in prepubescent children. Eur J Appl Physiol 105:731-738. doi: 10.1007/s00421-008-0955-8
• Journal article (Japanese)
Hiraoka M (1990) Formation and control of dioxins in municipal solid waste treatment (in Japanese). Haikibutsu Gakkaishi 1:20–37
• Article by DOI
Slifka MK, Whitton JL (2000) Clinical implications of dysregulated cytokine production. J Mol Med. doi:10.1007/s001090000086
• Book
South J, Blass B (2001) The future of modern genomics. Blackwell, London
• Book chapter
Brown B, Aaron M (2001) The politics of nature. In: Smith J (ed) The rise of modern genomics, 3rd edn. Wiley, New York, pp 230-257
• Online document
Cartwright J (2007) Big stars have weather too. IOP Publishing PhysicsWeb. http://physicsweb.org/articles/news/11/6/16/1. Accessed 26 June 2007
• Dissertation
Trent JW (1975) Experimental acute renal failure. Dissertation, University of California
Always use the standard abbreviation of a journal’s name according to the ISSN List of Title Word Abbreviations, see http://www.issn.org/2-22661-LTWA-online.php
Artwork
Electronic Figure Submission
• Supply all figures electronically.
• Indicate what graphics program was used to create the artwork.
• For vector graphics, the preferred format is EPS; for halftones, please use TIFF format. MS Office files are also acceptable.
• Vector graphics containing fonts must have the fonts embedded in the files.
• Name your figure files with "Fig" and the figure number, e.g., Fig1.eps.
Line Art
• Definition: Black and white graphic with no shading.
• Do not use faint lines and/or lettering and check that all lines and lettering within the figures are legible at final size.
• All lines should be at least 0.1 mm (0.3 pt) wide.
• Scanned line drawings and line drawings in bitmap format should have a minimum resolution of 1200 dpi.
• Vector graphics containing fonts must have the fonts embedded in the files.
Halftone Art
• Definition: Photographs, drawings, or paintings with fine shading, etc.
• If any magnification is used in the photographs, indicate this by using scale bars within the figures themselves.
• Halftones should have a minimum resolution of 300 dpi.
Combination Art
• Definition: a combination of halftone and line art, e.g., halftones containing line drawing, extensive lettering, color diagrams, etc.
• Combination artwork should have a minimum resolution of 600 dpi.
Color Art
• Color art is free of charge for online publication.
• If black and white will be shown in the print version, make sure that the main information will still be visible. Many colors are not distinguishable from one another when converted to black and white. A simple way to check this is to make a xerographic copy to see if the necessary distinctions between the different colors are still apparent.
• If the figures will be printed in black and white, do not refer to color in the captions.
• Color illustrations should be submitted as RGB (8 bits per channel).
Figure Lettering
• To add lettering, it is best to use Helvetica or Arial (sans serif fonts).
• Keep lettering consistently sized throughout your final-sized artwork, usually about 2–3 mm (8–12 pt).
• Variance of type size within an illustration should be minimal, e.g., do not use 8-pt type on an axis and 20-pt type for the axis label.
• Avoid effects such as shading, outline letters, etc.
• Do not include titles or captions into your illustrations.
Figure Numbering
• All figures are to be numbered using Arabic numerals.
• Figures should always be cited in the text in consecutive numerical order.
• Figure parts should be denoted by lowercase letters (a, b, c, etc.).
Figure Captions
• Each figure should have a concise caption describing accurately what the figure depicts. Include the captions in the text file of the manuscript, not in the figure file.
• Figure captions begin with the term Fig. in bold type, followed by the figure number, also in bold type.
• No punctuation is to be included after the number, nor is any punctuation to be placed at the end of the caption.
• Identify all elements found in the figure in the figure caption; and use boxes, circles, etc., as coordinate points in graphs.
• Identify previously published material by giving the original source in the form of a reference citation at the end of the figure caption.
Figure Placement and Size
• When preparing your figures, size figures to fit in the column width.
• The figures should be 39 mm, 84 mm, 129 mm, or 174 mm wide and not higher than 234 mm.
Permissions
If you include figures that have already been published elsewhere, you must obtain permission from the copyright owner(s) for both the print and online format. Please be aware that some publishers do not grant electronic rights for free and that Springer will not be able to refund any costs that may have occurred to receive these permissions. In such cases, material from other sources should be used.
Accessibility
In order to give people of all abilities and disabilities access to the content of your figures, please make sure that
• All figures have descriptive captions (blind users could then use a text-tospeech software or a text-to-Braille hardware)
• Patterns are used instead or in addition to colors for conveying information (color-blind users would then be able to distinguish the visual elements)
• Any figure lettering has a contrast ratio of at least 4.5:1.
Tables
• All tables are to be numbered using Arabic numerals.
• Tables should always be cited in text in consecutive numerical order.
• For each table, please supply a table caption (title) explaining the components of the table.
• Identify any previously published material by giving the original source in the form of a reference at the end of the table caption.
• Footnotes to tables should be indicated by superscript lower-case letters (or asterisks for significance values and other statistical data) and included beneath the table body.
Electronic Supplementary Material
Electronic supplementary material will be published in the online version only. It may consist of
• Information that cannot be printed: animations, video clips, sound recordings
• Information that is more convenient in electronic form: sequences, spectral data, etc.
• Large original data, e.g. additional tables, illustrations, etc.
Submission
• Supply all supplementary material in standard file formats.
• Please include in each file the following information: article title, journal name, author names; affiliation and e-mail address of the corresponding author.
• To accommodate user downloads, please keep in mind that larger-sized files may require very long download times and that some users may experience other problems during downloading.
Text and Presentations
• Submit your material in PDF format; .doc or .ppt files are not suitable for long-term viability.
• A collection of figures may also be combined in a PDF file.
Spreadsheets
• Spreadsheets should be converted to PDF if no interaction with the data is intended.
• If the readers should be encouraged to make their own calculations, spreadsheets should be submitted as .xls files (MS Excel).
Specialized Formats
• Specialized formats such as .pdb (chemical), .wrl (VRML), .nb (Mathematica notebook), and .tex can also be supplied.
Collecting Multiple Files
• It is possible to collect multiple files in a .zip or .gz file.
Numbering
• If supplying any supplementary material, the text must make specific mention of the material as a citation, similar to that of figures and tables.
• Refer to the supplementary files as “Online Resource”, e.g., "... as shown in the animation (Online Resource 3)", “... additional data are given in Online Resource 4”.
• Name the files consecutively, e.g. “ESM_3.mpg”, “ESM_4.pdf”.
Captions
• For each supplementary material, please supply a concise caption describing the content of the file.
Processing of supplementary files
• Electronic supplementary material will be published as received from the author without any conversion, editing, or reformatting.
Accessibility
In order to give people of all abilities and disabilities access to the content of your supplementary files, please make sure that
• The manuscript contain a descriptive caption for each supplementary material
• Video files do not contain anything that flashes more than three times per second (so that users prone to seizures caused by such effects are not put at risk)
After Acceptance
Upon acceptance of your article you will receive a link to the special Author Query Application at Springer’s web page where you can sign the Copyright Transfer Statement online and indicate whether you wish to order Open Choice. Once the Author Query Application has been completed, your article will be processed and you will receive the proofs. You will also receive a separate e-mail for ordering offprints and printing of figures in color.
Open Choice: In addition to the normal publication process (whereby an article is submitted to the journal and access to that article is granted to customers who have purchased a subscription), Springer provides an alternative publishing option: Springer Open Choice. A Springer Open Choice article receives all the benefits of a regular subscription-based article, but in addition is made available publicly through Springer’s online platform SpringerLink. We regret that Springer Open Choice cannot be ordered for published articles. Springer Open Choice [http://springer.com/openchoice]
Copyright transfer: Authors will be asked to transfer copyright of the article to the Publisher (or grant the Publisher exclusive publication and dissemination rights). This will ensure the widest possible protection and dissemination of information under copyright laws. Open Choice articles do not require transfer of copyright as the copyright remains with the author. In opting for open access, they agree to the Springer Open Choice License.
Offprints: Offprints can be ordered by the corresponding author.
Color illustrations: Online publication of color illustrations is free of charge. For color in the print version, authors will be expected to make a contribution towards the extra costs.
Proof reading: The purpose of the proof is to check for typesetting or conversion errors and the completeness and accuracy of the text, tables and figures. Substantial changes in content, e.g., new results, corrected values, title and authorship, are not allowed without the approval of the Editor. After online publication, further changes can only be made in the form of an Erratum, which will be hyperlinked to the article.
Online First: The article will be published online after receipt of the corrected proofs. This is the official first publication citable with the DOI. After release of the printed version, the paper can also be cited by issue and page numbers.
Editorial Board
Chief Editors
Shin-ichi Sakai, Kyoto University, Japan
Toshiaki Yoshioka, Tohoku University, Japan
Yong-Chil Seo, Yonsei University, Korea
Editorial Board
Sung-Keun Bae, Changwon National University, Korea
Thallada Bhaskar, Indian Institute of Petroleum (IIP), India
Helge Brattebø, Norwegian University of Science and Technology (NTNU), Norway
Paul H. Brunner, Vienna University of Technology, Austria
Alfons Buekens, Free University of Brussels, Belgium
Tien Chin Chang, National Taipei University of Technology, Taiwan R.O.C.
Thomas H. Christensen, Technical University of Denmark, Denmark
Moonkyung Chung, Korea Institute of Construction Technology, Korea
Luis F. Diaz, CalRecovery Inc., USA
Jong-In Dong, The University of Seoul, Korea
Heidelore Fiedler, United Nations Environment Programme-Chemicals, Switzerland
Koichi Fujie, Yokohama National University, Japan
Pin-Jing He, Tongji University, China
Stefanie Hellweg, Swiss Federal Institute of Technology; ETH Zurich, Switzerland
Yasuhiro Hirai, Kyoto University, Japan
Makoto Hisada, Tohoku University, Japan
William Hogland, Linnaeus University, Sweden
Eiji Hosoda, Keio University, Japan
Gjalt Huppes, Leiden University, The Netherlands
Jae-Hyuk Hyun, Chungnam National University, Korea
Hideaki Ito, Nagoya University, Japan
Yong-Chul Jang, Chungnam National University, Korea
Myung Chae Jung, Sejong University, Korea
Masashi Kamon, Takamatsu National College of Technology, Japan
Hidehiro Kaneko, University of Yamanashi, Japan
Takeshi Katsumi, Kyoto University, Japan
Akiko Kida, Ehime University, Japan
Jae Young Kim, Seoul National University, Korea
René Kleijn, Leiden University, The Netherlands
Yasushi Kondo, Waseda University, Japan
Jai-Young Lee, University of Seoul, Korea
Jinhui Li, Tsinghua University, China
Thomas Lindhqvist, Lund University, Sweden
Hsiao-Kang Ma, National Taiwan University, Taiwan
Yasushi Matsufuji, Fukuoka University, Japan
Toshihiko Matsuto, Hokkaido University, Japan
Dal-Ki Min, Gachon University, Korea
Stephen Moore, The University of New South Wales, Australia
Yuichi Moriguchi, The University of Tokyo, Japan
Velayutham Murugesan, Anna University, India
Olandele A. Ogunseitan, University of California, Irvine, USA
Gil-Jong Oh, National Institute of Environmental Research, Korea
Jan A. Oleszkiewicz, University of Manitoba, Canada
Tadashi Otsuka, Waseda University, Japan
Agamuthu Pariatamby, University of Malaya, Malaysia
Jin-Won Park, Yonsei University, Korea
Chae-Gun Phae, Seoul National University of Technology, Korea
Chavalit Ratanatamskul, Chulalongkorn University, Thailand
Barbara Reck, Yale University, USA
Kang-In Rhee, Korea Institute of Geoscience and Material Resources, Korea
Seung-Whee Rhee, Kyonggi University, Korea
Vera Susanne Rotter, Technische Universität Berlin, Germany
Heinz Schandl, Commonwealth Scientifi c and Industrial Research Organisation (CSIRO); Sustainable Ecosystems, Australia
Takayuki Shimaoka, Kyushu University, Japan
Orawan Siriratpiriya, Chulalongkorn University, Thailand
John H. Skinner, Solid Waste Association of North America (SWANA), USA
Kazuhiro Takamizawa, Gifu University, Japan
Masaki Takaoka, Kyoto University, Japan
Masaru Tanaka, Tottori University of Environmental Studies, Japan
Tomohiro Tasaki, National Institute for Environmental Studies, Japan
Kazuhiro Ueta, Kyoto University, Japan
Carlo Vandecasteele, Leuven University, Belgium
Jürgen Vehlow, Karlsruhe Institute Technology (KIT), Germany
Wei Wang, Tsinghua University, China
Hong Yao, Huazhong University of Science and Technology (HUST), China
|
|
|
|
