期刊名称：COMPUTATIONAL GEOSCIENCES
 期刊简介(About the journal)
投稿须知(Instructions to Authors)
编辑部信息(Editorial Board)
About the journal
Aims & Scope
Accurate and efficient imaging of subsurface structure and modeling of processes in the subsurface require multidisciplinary collaboration among mathematicians, engineers, chemists, physicists and geoscientists. Computational Geosciences' main objective is to provide a platform for interaction among these diverse scientific groups sharing interest in developing mathematical models and efficient algorithms for solving them. The aim of this international journal is to facilitate the exchange of ideas across the disciplines and among universities and industrial and governmental laboratories.
Computational Geosciences publishes high quality papers on mathematical modeling, simulation, data analysis, imaging, inversion and interpretation with applications in the geosciences. The themes and application areas to be covered include reservoir and environmental engineering, hydrology, geochemistry, geomechanics, seismic and electromagnetic imaging, geostatistics and reservoir/aquifer characterization, and high performance parallel computing. More specifically, Computational Geosciences welcomes contributions concerning, for example, bioremediation, diffusion and dispersion, geology and geostatistics, scale up, multiphase flow and reactive transport, geophysical imaging and inversion methods, seismic and electromagnetic modeling, numerical methods and parallel computing. Both theoretical and applied scientists are invited to participate.
Computational Geosciences focuses mainly on quantitative aspects of models describing transport processes in permeable media. It is targeted at petroleum engineers, hydrologists, quantitative environmental engineers, soil physicists, soil and geochemists, applied mathematicians, geologists and seismologists.
Instructions to Authors
Manuscript Submission
Kluwer Academic Publishers request the submission of manuscripts and figures in electronic form in addition to a hard-copy printout. The preferred storage medium for your electronic manuscript is a 3 1/2 inch diskette. Please label your diskette properly, giving exact details on the name(s) of the file(s), the operating system and software used. Always save your electronic manuscript in the word processor format that you use; conversions to other formats and versions tend to be imperfect. In general, use as few formatting codes as possible. For safety's sake, you should always retain a backup copy of your file(s). After acceptance, please make absolutely sure that you send the latest (i.e., revised) version of your manuscript, both as hard-copy printout and on diskette (submission in electronic form of the final version of your article is compulsory).
Kluwer Academic Publishers prefer articles submitted in word processing packages such as MS Word, WordPerfect, etc. running under operating systems MS DOS, Windows and Apple Macintosh, or in the file format LaTeX. Articles submitted in other software programs can also be accepted.
For submission in LaTeX, Kluwer Academic Publishers have developed a Kluwer LaTeX class file, which can be downloaded from: http://www.wkap.nl/authors/jrnlstylefiles/
Use of this class file is highly recommended. Do not use versions downloaded from other sites. Technical support is available at: texhelp@wkap.nl. If you are not familiar with TeX/LaTeX, the class file will be of no use to you. In that case, submit your article in a common word processor format.
For the purpose of reviewing, articles for publication should be submitted as hard-copy printout (in triplicate) and on diskette or via e-mail (a hard-copy printout of figures and tables should be sent by mail) to: Editorial Office
Sandrine Boute
INRIA-Rocquencourt
BP 150
78150 Le Chesnay Cedex
France
E-mail: sandrine.boute@inria.fr
Tel: +33 1 39 63 56 21
Fax: +33 1 39 63 58 84
Manuscript Presentation
The journal's language is English. British English or American English spelling and terminology may be used, but either one should be followed consistently throughout the article. Manuscripts should be printed or typewritten on A4 or US Letter bond paper, one side only, leaving adequate margins on all sides to allow reviewers' remarks. Please double-space all material, including notes and references. Quotations of more than 40 words should be set off clearly, either by indenting the left-hand margin or by using a smaller typeface. Use double quotation marks for direct quotations and single quotation marks for quotations within quotations and for words or phrases used in a special sense.
Number the pages consecutively with the first page containing:
- running head (shortened title)
- article type
- title
- author(s)
- affiliation(s)
- abstract
- keywords
- full address for correspondence, including telephone and fax number and e-mail address
Abstract
Please provide a short abstract of 50-100 words. The abstract should not contain any undefined abbreviations or unspecified reference.
Keywords
Please provide 5 to 10 keywords or short phrases.
Figures and TablesSubmission of electronic figures
In addition to hard-copy printouts of figures, authors are requested to supply the electronic versions of figures in either Encapsulated PostScript (EPS) or TIFF format. Many other formats, e.g., Microsoft Postscript, PiCT (Macintosh) and WMF (Windows), cannot be used and the hard copy will be scanned instead.
Figures should be saved in separate files without their captions, which should be included with the text of the article. Files should be named according to DOS conventions, e.g., `figure1.eps'. For vector graphics, EPS is the preferred format. Lines should not be thinner than 0.25~pts and in-fill patterns and screens should have a density of at least 10%. Font-related problems can be avoided by using standard fonts such as Times Roman and Helvetica. For bitmapped graphics, TIFF is the preferred format but EPS is also acceptable. The following resolutions are optimal: black-and-white line figures - 600 - 1200 dpi; line figures with some grey or coloured lines - 600 dpi; photographs - 300 dpi; screen dumps - leave as is. Higher resolutions will not improve output quality but will only increase file size, which may cause problems with printing; lower resolutions may compromise output quality. Please try to provide artwork that approximately fits within the typeset area of the journal. Especially screened originals, i.e., originals with grey areas, may suffer badly from reduction by more than 10-15%. Avoiding problems with EPS graphics
Please always check whether the figures print correctly to a PostScript printer in a reasonable amount of time. If they do not, simplify your figures or use a different graphics program.
If EPS export does not produce acceptable output, try to create an EPS file with the printer driver (see below). This option is unavailable with the Microsoft driver for Windows NT, so if you run Windows NT, get the Adobe driver from the Adobe site (www.adobe.com).
If EPS export is not an option, e.g., because you rely on OLE and cannot create separate files for your graphics, it may help us if you simply provide a PostScript dump of the entire document. How to set up for EPS and PostScript dumps under Windows
Create a printer entry specifically for this purpose: install the printer `Apple Laserwriter Plus' and specify `FILE': as printer port. Each time you send something to the `printer' you will be asked for a filename. This file will be the EPS file or PostScript dump that we can use.
The EPS export option can be found under the PostScript tab. EPS export should be used only for single-page documents. For printing a document of several pages, select `Optimise for portability' instead. The option `Download header with each job' should be checked. Submission of hard-copy figures
If no electronic versions of figures are available, submit only high-quality artwork that can be reproduced as is, i.e., without any part having to be redrawn or re-typeset. The letter size of any text in the figures must be large enough to allow for reduction. Photographs should be in black-and-white on glossy paper. If a figure contains colour, make absolutely clear whether it should be printed in black-and-white or in colour. Figures that are to be printed in black-and-white should not be submitted in colour. Authors will be charged for reproducing figures in colour.
Each figure and table should be numbered and mentioned in the text. The approximate position of figures and tables should be indicated in the margin of the manuscript. On the reverse side of each figure, the name of the (first) author and the figure number should be written in pencil; the top of the figure should be clearly indicated. Figures and tables should be placed at the end of the manuscript following the References section. Each figure and table should be accompanied by an explanatory legend. The figure legends should be grouped and placed on a separate page. Figures are not returned to the author unless specifically requested.
In tables, footnotes are preferable to long explanatory material in either the heading or body of the table. Such explanatory footnotes, identified by superscript letters, should be placed immediately below the table.
Section Headings
First-, second-, third-, and fourth-order headings should be numbered (e.g., 1., 1.1, 1.1.1, 2., 2.1, etc.).
Appendices
Supplementary material should be collected in an Appendix and placed before the Notes and Reference sections.
Notes
Footnotes (if any) should be avoided whenever possible and integrated in the text. Notes should be indicated by consecutive superscript numbers in the text.
Acknowledgements
Acknowledgements of people, grants, funds, etc. should be placed in a separate section before the References.
References
References to books, journal articles, articles in collections and conference or workshop proceedings, and technical reports should be listed at the end of the article in numerical order as they appear in the manuscript text and cited as follows.
References to books should include the author's name; year of publication; title in full, underlined or in italics; page numbers; publisher, place of publication:
[1] M.C. Bustos, F. Concha, R. Burger and E.M. Tory, Sedimentation and Thickening: Phenomenological Foundation and Mathematical Theory (Kluwer Academic, Dordrecht, The Netherlands, 1999).
References to essays in an edited collection should include the author's name; year of publication; title of essay; editor's name; title of volume, underlined or in italics; first and last page numbers; publisher; place of publication:
[2] H. Holden and L. Holden, On scalar conservation laws in one-dimension, in: Ideas and Methods in Mathematics and Physics, eds. S. Albeverio, J.E. Fenstad, H.~Holden and T. Lindstrom (Cambridge University Press, Cambridge, 1988) pp. 480-509.
References to essays in conferences proceedings should include the author's name; year of publication; title of essay; title of proceedings underlined or in italics; first and last page numbers; place of conference; organization from whom proceedings can be obtained:
[3] M. Afif and B. Amaziane, Analysis of finite volume schemes for two-phase flow in porous media on unstructured grids, in: Finite Volumes for Complex Applications II - Problems and Perspectives, Proc. of Second International Symposium, Duisburg, Germany, 1999, eds. R. Vilsmeier et al. (1999) pp. 387-394.
References to articles in periodicals should include the author's name; year of publication; title of article; full title of periodical, underlined or in italics; volume; issue number where appropriate; and first and last page numbers:
[4] S. Evje and K.H. Karlsen, Discrete approximations of BV solutions to doubly nonlinear degenerate parabolic equations, Numer. Math. 86(3) (2000) 377-417.
References to technical reports or doctoral dissertations should include the author's name; year of publication; title of article, underlined or in italics; identifying number or description, department, institution, and location of institution:
[5] K. Ashley, Modelling Legal Argument: Reasoning with Cases and Hypotheticals, Ph.D. diss., Department of Computer and Information Science, University of Massachusetts, Amherst, MA (1987).
Proofs
Proofs will be sent to the corresponding author. One corrected proof, together with the original, edited manuscript, should be returned to the Publisher within three days of receipt by mail (airmail overseas).
Offprints
Fifty offprints of each article will be provided free of charge. Additional offprints can be ordered by means of an offprint order form supplied with the proofs.
Page Charges and Colour Figures
No page charges are levied on authors or their institutions. Colour figures are published at the author's expense only.
Copyright
Authors will be asked, upon acceptance of an article, to transfer copyright of the article to the Publisher. This will ensure the widest possible dissemination of information under copyright laws.
Permissions
It is the responsibility of the author to obtain written permission for a quotation from unpublished material, or for all quotations in excess of 250 words in one extract or 500 words in total from any work still in copyright, and for the reprinting of figures, tables or poems from unpublished or copyrighted material.
Additional Information
Additional information can be obtained from:
Publishing Editor COMG
Kluwer Academic Publishers
Tel: +31 78 657 6235
Fax: +31 78 657 6388
or from the home page of Computational Geosciences: http://www.wkap.nl/journalhome.htm/1420-0597
Editorial Board
Editor-in-Chief:
Jérôme Jaffr?/B>
INRIA, Le Chesnay, France
Mary F. Wheeler
TICAM, University of Texas at Austin, USA
Editorial Board:
L.M. Abriola, University of Michigan, Ann Arbor, USA; A.P. Bourgeat, Universit?Claude Bernard Lyon I, France; J. Bruining, Delft University of Technology, The Netherlands; M. Christie, Heriot-Watt University, Edinburgh, UK; C.N. Dawson, University of Texas, Austin, USA; J. Douglas, Purdue University, West Lafayette, IN, USA; J. Glimm, University of New York, Stony Brook, USA; P. Knabner, Universität Erlangen, Germany; W.A. Mulder, Shell Research BV, Rijswijk, The Netherlands; F.M. Orr Jr., Stanford University, CA, USA; W. Symes, Rice University, Houston, TX, USA; A. Tompson, Lawrence Livermore National Laboratory, CA, USA
Editorial Office
Sandrine Boute
INRIA-Rocquencourt
BP 150
78150 Le Chesnay Cedex
France
E-mail: sandrine.boute@inria.fr
Tel: +33 1 39 63 56 21
Fax: +33 1 39 63 58 84
|
