期刊名称：MATHEMATICAL AND COMPUTER MODELLING OF DYNAMICAL SYSTEMS
 期刊简介(About the journal)
投稿须知(Instructions to Authors)
编辑部信息(Editorial Board)
About the journal
Mathematical and Computer Modelling of Dynamical Systems
Mathematical and computer modelling is being used in an increasing number of disciplines. Mathematical and Computer Modelling of Dynamical Systems reflects this movement and its readership embraces mathematicians and computer scientists who are involved with applications of mathematical and computer modelling.
Instructions to Authors
Mathematical and Computer Modelling of Dynamical Systems - Information for Authors
Instructions for authors
Submission of manuscripts
Guidelines for manuscripts accepted for publication
Instructions for Authors :
In order to avoid confusion and superfluous correspondence, authors are kindly requested to regard the following when preparing their manuscript:
Modelling of systems and systems behavior is of importance in many engineering applications and in simulation. Contrary to other periodicals, MCMDS concentrates on modelling. Computer simulation is restricted to the field of modelling and the consequences of modelling, but it does not include all simulation languages or the general design of multi-purpose simulation programs independent on modelling aspects.
Papers dealing with applications are accepted only when the purpose of the model, the assumptions (explicit or implicit) made in its development and the precise process of model validation are discussed carefully. Authors are requested to concentrate on those aspects which are of interest to a large community of engineers and scientists and to organize the paper so that it is stimulating and readable for engineers and scientists working in a wide range of application areas.
The journal will accept only papers submitted in English. Manuscripts should meet high academic standards. Contributors need to remember that they are writing for an international audience. National colloquialisms and idiomatic use of language should be avoided and gender neutral language used. It may be useful for non-English speakers to have a native English speaker read through the article before submission.
The title page should carry the title, the authors' names and affiliations and current adresses. Supplying telephone and fax numbers as well as any e-mail address would be very useful. The author to whom correspondence should be addressed must be clearly indicated. In the case of a long title, an abbreviated version of no more than 40 characters (including spaces) should be supplied by the author for running heads.
Papers must contain a summary of about 100 words briefly summarizing the essential contents.
Keywords should be provided. Please use either the American Mathematical Society (AMS) or INSPEC classifications.
Acknowledgements should appear on a separate sheet at the end of the written section, before the references.
References
All references should be numbered and listed in alphabetical order at the end of the paper and follow the style given below:
1. Lack, G.N.T., Sinclair, R.E. and Atack, M.J.:The Search for a Second Sydney Airport: A Dynamic Programming Scheduling Model. J. Oper. Res. Soc. 30 (1979), pp. 213 - 224.
2. Sondergeld, K.P. (ed.): A Collection of Pland Models and Design Specifications for Robust Control. SFVLR, Inst. f. Dynamik der Flugsysteme, Oberpfaffenhofen, 1982.
3. Troch, I.: Modelling for Optimization and Control of Systems. In: W. Buehler, et al. (eds.): Oper. Res. Proc.: DGOR-Papers of the Internat. Conf. on Oper. Res., Springer, Berlin, 1992, pp. 235-248.
4. Willians, H.P.: Model Solving in Mathematical Programming. Wiley, New York, 1993.
5. Young, P. and Beck, B.: The Modelling and Control of Water Quality in a River System. Automatica 10 (1974), pp. 455-468.
References should be quoted in the text by numbers and enclosed in brackets, for example [2], [3,4]
Tables, figures and halftones
Tables must be presented on separate sheets. Line drawings (graphs) should be made with black India ink and presented on white drawing paper of good quality. A computer printout should be of comparable quality.
Halftone illustrations should be presented as mounted or unmounted glossy prints. Markings should be clear and made on the photographs. Graphs, diagrams, and photographs should be clear enough to permit reduction to a size of 12 x 18 cm without affecting legibility.
Tables and figures should be numbered in Arabic numerals. Legends to figures should be given on a separate sheet. The approximate position of figures and tables should be clearly indicated in the text. The costs of coloured illustrations and halftones must be met in full by the author(s). Prepayment is required and estimates can be obtained at the time of submission of the manuscript for review.
Permissions
It is the responsibility of the author to obtain written permission for a quotation from unpublished material, or for all quotations in excess of 250 words in one extract or 500 words in total from any work still in copyright, and for the reprinting of illustrations or tables from unpublished or copyright material.
Submission of a paper to Mathematical Computer Modelling of Dynamical Systems implies that it has not been published before and that it is not being considered for publication elsewhere.
Submission of manuscripts :
Papers may be submitted to any of the Associate Editors or, preferably, to the Editor-in-Chief. Publication in original or revised form depends upon the result of the reviewing procedure. The journal strives for flexibility in the type and contents of papers. Therefore, there are no strict rules concerning the length or type of presentation. The length must however be appropriate to the contents and nature of the paper and the presentation should place due emphasis on questions of modelling and modelling goals, with attention given to those aspects of the work which are likely to be of interest to a broad scientific and engineering community. Papers should be self-contained and should not depend excessively on previously published work.
Three copies of the manuscript (including halftones and illustrations) should be sent to the Editor-in-Chief:
Prof. Inge Troch
echnische Universitat Wien
Wiedner Hauptstrasse 8-10
A-1040 Wien
Austria
Tel.: +43 (0)1 58801 11451
Fax: +43 (0)1 58801 11499
itroch@email.tuwien.ac.at
or to one of the Associate Editors:
Prof. S. Marsili-Libelli
Dept. of Systems & Computers
University of Florence
Via S. Marta, 3
I-50139 Florence
Italy
Tel. & Fax: +39 (0)55 4796 264
marsili@ingfil.ing.unifi.it
Prof. Peter C. Muler
Safety Control Engineering
University of Wuppertal
42097 Wuppertal
Germany
Tel.: +49 (0)202 439 2018
Fax: +49 (0)202 439 2901
mueller@srm.uni-wuppertal.de
Prof. David Murray-Smith
ept. of Electronics & Electrical Engineering
University of Glasgow
Rankine Building
Oakfield Avenue
Glasgow G12 8LT
UK
Tel.: +44 (0)41 330 5222
Fax: +44 (0)41 330 4907
d.murray-smith@elec.gla.ac.uk
Prof. Robert E. Skelton
Structural Systems and Control
Dept. of Applied Mechanics and Engineering Sciences (AMES)
9500 Gilman Drive
La Jolla, CA 92093-0411
USA
+1 (0)619 822 1054
+1 (0)619 534 7078
reskelton@ames.ucsd.edu
Dr. George W. Zobrist
Department of Computer Science
University of Missouri-Rolla
1870 Miner Circle
Rolla, MO 65409-0350
USA
Tel.: +1 (0)573 341 4492
Fax: +1 (0)573 341 4501
zobrist@umr.edu
http://www.cs.umr.edu
Guidelines for manuscripts accepted for publication :
Articles formatted in LaTeX or TeX are preferred. For the LaTeX stylefile, Click here
If authors cannot integrate figures with LaTeX text file, they should be delivered separately in a Postscript format. If authors cannot submit in LaTeX or TeX they should contact Marlieke Ariaans at Swets & Zeitlinger.
We require all accepted manuscripts to be submitted on a diskette. Please refer to Submission of Final Articles on Diskettes.
Editorial Board
P.C. Breedveld , University of Twente, Enschede, The Netherlands
F. Breitenecker , Vienna University of Technology, Vienna, Austria
F. Cellier , University of Arizona, Tucson, AZ, USA
F.L. Chernousko , Russian Academy of Sciences, Moscow, Russia
A. Cheruy , ENSIEG, Saint Martin D'Heres , France
S. Engell , Universitat Dortmund, Dortmund, Germany
B.A. Foss , University of Trondheim, Trondheim, Norway
K. Furuta , Tokyo Denki University, Saitama, Japan
R. Hanus , Free University of Brussels, Brussels, Belgium
K. Juslin , Technical Research Centre, Espoo, Finland
R. Karba , Faculty of Electrical and Computer Engineering, Ljubljana, Slovenia
D. Karnopp , University of California, Davis, CA, USA
N.A. Kheir , Oakland University, Rochester, MI, USA
H. Kwakernaak , University of Twente, Enschede, The Netherlands
L. Ljung , Linkoping University, Linkoping, Sweden
C. Maffezzoni , Politecnico di Milano, Milan, Italy
J.V.R. Prasad , Georgia Institute of Technology, Atlanta, GA, USA
W. Schiehlen , Universitat Stuttgart, Stuttgart, Germany
K. Schlacher , Johannes Kepler University of Linz, Linz, Austria
S. Tzafestas , National Technical University of Athens, Athens, Greece
R. Viertl , Vienna University of Technology, Vienna, Austria
M. Zeitz , Universitat Stuttgart, Stuttgart, Germany
G. Zobrist , University of Missouri-Rolla, Rolla, MO, USA
|
