期刊名称：INTERNATIONAL JOURNAL OF PEST MANAGEMENT
 期刊简介(About the journal)
投稿须知(Instructions to Authors)
编辑部信息(Editorial Board)
About the journal
The International Journal of Pest Management publishes original research papers concerning the control of pests and diseases of plants of economic, conservation, medicinal and amenity value within the areas of agriculture, horticulture, forestry, conservation, and stored products research. The geographical scope of the journal is worldwide.The journal covers the following topics: control of pests (invertebrates, vertebrates, weeds) and diseases of plants and their products; biological and cultural control and integrated pest management; plant resistance to pest attack, including genetic aspects; epidemiology and population dynamics of pests and diseases in relation to control strategies; assessment of pest and disease damage (damage and economic thresholds); theoretical and systems models as applied to practical pest management; the relationship of pest management to the wider aspects of farming systems and rural development; and pest management systems. The journal also publishes reviews, normally by invitation, and taxonomic keys for the identification of pests and control agents of major economic importance. The journal's "Forum"section aims to facilitate discussion and debate between readers and authors on important issues in pest management.
Readership:
Researchers in agriculture, horticulture, forestry and stored products pest management.
Abstracting Information:
International Journal of Pest Management is covered by the following abstracting and indexing services: BIOSIS, CAB Abstracts, CAB International, Cambridge Scientific Abstracts, Chemical Abstracts, Current Awareness in Biological Sciences (CABS), Current Contents: Agriculture, Biology and Environmental Sciences, Environmental Periodic Bibliography, Food Science and Technology Abstracts, GEO Abstracts/GEOBASE, Research Alert, Science Citation Index, SciSearch, UnCover and Zoological Record.
Instructions to Authors
***Note to Authors: please make sure your contact address information is clearly visible on the outside of all packages you are sending to Editors.***
General Guidelines
The International Journal of Pest Management publishes original research papers concerning the control of pests and diseases of plants of economic, conservation, medicinal and amenity value within the areas of agriculture, horticulture, forestry, conservation, and stored products research. The geographical scope of the journal is worldwide. The journal covers the following topics: control of pests (invertebrates, vertebrates, weeds) and diseases of plants and their products; biological and cultural control and integrated pest management; plant resistance to pest attack, including genetic aspects; epidemiology and population dynamics of pests and diseases in relation to control strategies; assessment of pest and disease damage (damage and economic thresholds); theoretical and systems models as applied to practical pest management; the relationship of pest management systems. The journal also publishes reviews, normally by invitation, and taxonomic keys for the identification of pests and control agents of major economic importance. The journal's "Forum"section aims to facilitate discussion and debate between readers and authors on important issues in pest management.
Contacting the Editor:
M. A. Jervis
School of Pure and Applied Biology
University of Wales College of Cardiff
PO Box 915
Cardiff
CF1 3TL
UK
Tel: +44 (0)1222 874948
Fax: +44 (0)1222 874305
Email:Jervis@CF.AC.UK
Taylor & Francis
The foundations of Taylor & Francis were laid in pioneering fashion in 1798. Richard Taylor printed and launched the Philosophical Magazine, one of the first scientific journals published by an independent company.
It was the start of a close collaboration with scholarly societies which was cultivated throughout the 1880s. The company became the printer for the Royal Astronomical Society, the Geological Society, the Zoological Society, the Horticultural Society, the Royal Botanical Society, the British Association for the Advancement of Science, the Royal Society and the Linnean Society of London. With the proliferation of periodicals and information generated by learned societies at the turn of the century, Taylor & Francis also became pioneers in the field of abstracting journals, and in 1890 the company became the first printer of Science Abstracts the precursor of today's Physics Abstracts.
Book publishing was a mostly secondary concern for the company until the 1960s, when significant expansion was implemented at all levels from schoolbooks to high level monographs. Since then the focus of book publishing has been predominantly at the undergraduate level and above, with an ever larger number of subject areas brought into the programme.
The principles which drove the founders of Taylor and Francis are still paramount today. Academic scholarship must be of the highest quality which will be reflected in appropriate production practices and values. We hope that we remain true to those principles and that being a Taylor & Francis author is still a pleasant, profitable and proud experience.
Contacting Taylor & Francis
Taylor & Francis Ltd, 4 Park Square, Milton Park, Abingdon, Oxon, OX14 4RN
Email: enquiry@tandf.co.uk
Submitting a paper to International Journal of Pest Management
Please read these Guidelines with care and attention: failure to follow them may result in your paper being delayed. Note especially the referencing conventions used by International Journal of Pest Management and for all manuscripts, non-discriminatory language is mandatory. Sexist or racist terms should not be used.
International Journal of Pest Management considers all manuscripts on condition they are the property (copyright) of the submitting author(s) and that copyright will be transferred to International Journal of Pest Management and Taylor & Francis Ltd if the paper is accepted.
International Journal of Pest Management considers all manuscripts on the strict condition that they have been submitted only to International Journal of Pest Management, that they have not been published already, nor are they under consideration for publication, nor in press elsewhere. Authors who fail to adhere to this condition will be charged all costs which International Journal of Pest Management incurs, and their papers will not be published.
Writing your paper
- Please write clearly and concisely, stating your objectives clearly and defining your terms. Your arguments should be substantiated with well-reasoned supporting evidence.
- For all manuscripts, non-discriminatory language is mandatory. Sexist or racist terms should not be used.
- In writing your paper, you are encouraged to review articles in the area you are addressing which have been previously published in International Journal of Pest Management, and where you feel appropriate, to reference them. This will enhance context, coherence, and continuity for our readers.
- Manuscripts should be typed on one single side of A4 or 8 x 11 inch white good quality paper, double-spaced throughout, including the reference section.
- Abstracts of around 200 words are required for all papers submitted and should precede the text of a paper.
- Papers must be submitted in quadruplicate, including the original or top copy.
- Authors should include telephone and fax numbers as well as e-mail addresses on the cover page of manuscripts.
- Section headings should be concise and numbered sequentially, using a decimal system for
subsections.
- Accepted manuscripts in their final, revised versions, must also be submitted as electronic word processing files on disk - see "Electronic Processing"
If authors are unable to generate such a version they should contact the Editor (address on title page).
Copyright permission
Contributors are required to secure permission for the reproduction of any figure, table, or extensive (more than fifty word) extract from the text, from a source which is copyrighted - or owned - by a party other than Taylor & Francis or the contributor.
This applies both to direct reproduction or "derivative reproduction"- when the contributor has created a new figure or table which derives substantially from a copyrighted source.
The following form of words can be used in seeking permission:
Dear [COPYRIGHT HOLDER]
I/we are preparing for publication an article entitled
[STATE TITLE]
to be published by Taylor & Francis Ltd in International Journal of Pest Management.
I/we should be grateful if you would grant us permission to include the following materials:
[STATE FIGURE NUMBER AND ORIGINAL SOURCE]
We are requesting non-exclusive rights in this edition and in all forms. It is understood, of course, that full acknowledgement will be given to the source.
Please note that Taylor & Francis are signatories of and respect the spirit of the STM Agreement regarding the free sharing and dissemination of scholarly information.
Your prompt consideration of this request would be greatly appreciated.
Yours faithfully
Code of experimental ethics and practice
Contributors are required to follow the procedures in force in their countries which govern the ethics of work done with animal subjects.
When experimental animals are used, state the species, strain, number used, and other pertinent descriptive characteristics.
When describing surgical procedures on animals, identify the pre-anaesthetic and anaesthetic agents used and state the amount of concentration and the route and frequency of administration for each. The use of paralytic agents, such as curare or succinylcholine, is not an acceptable substitute for anaesthetics. For other invasive procedures on animals, report the analgesic or tranquilizing drugs used; if none were used, provide justification for such exclusion.
When reporting studies on unanaesthetized animals, indicate that the procedures followed were in accordance with institutional guidelines.
Abstracts
Structured abstracts are required for all papers, and should be submitted as detailed below, following the title and author’s name and address, preceding the main text.
For papers reporting original research, state the primary objective and any hypothesis tested; describe the research design and your reasons for adopting that particular methodology; state the methods and observational/experimental procedures employed, including where appropriate tools, hardware, software, the selection and number of study areas/subjects, and the central experimental interventions; state the methods of statistical analysis used; state the main outcomes and results, including relevant data; and state the conclusions that might be drawn from these data and results, including their implications for further research or application/practice.
For review essays and "Forum"papers, state the primary objective of the review; the reasoning behind your literature selection; and the way you critically analyse the literature; state the main outcomes and results of your review; and state the conclusions that might be drawn, including their implications for further research or application/practice.
For "Commentary" papers state the primary objective of the paper, mentioning in the first paragraph the paper(s)/meeting your paper is concerned with; state the conclusions that might be drawn, including their implications for further research and application/practice. Note that commentary papers must not be used to emphasize the author's own research.
Abstracts should not exceed 200 words.
Notes on style
All authors are asked to take account of the diverse audience of International Journal of Pest Management. Clearly explain ?or avoid the use of ?terms that might be meaningful only to a local or national audience. However, note also that International Journal of Pest Management does not aspire to be international in the ways that McDonald’s restaurants or Hilton Hotels are international; we much prefer papers that, where appropriate, reflect the particularities of each social and cultural system.
Some specific points of style for the text of articles, research reports, case studies, reports, essay reviews, and reviews follow:
1. We prefer US to "American" USA to "United States" and UK to "United Kingdom"
2. We use conservative (British, not US, spelling, i.e. colour not color; behaviour (behavioural) not behavior; [school] programme not program; [he] practises not practices; centre not center; organization not organisation; analyse not analyze, etc.
3. Single "quotes"are used for quotations rather than double "quotes", unless the quote is "within" another quote?
4. Punctuation should follow the British style, e.g. "quotes precede punctuation"
5. Punctuation of common abbreviations should follow the following conventions: e.g. i.e. cf. Note that such abbreviations are not followed by a comma or a (double) point/period.
6. The em-dash should be clearly indicated in manuscripts by way of either a clear dash (? or a triple hyphen (---).
7. We are sparing in our use of the upper case in headings and references, e.g. only the first word in paper titles and all subheads is in upper case; titles of papers from journals in the references and other places are not in upper case.
8. Apostrophes should be used sparingly. Thus, decades should be referred to as follows: "The 1980s [not the 1980's] saw ..." Possessives associated with acronyms (e.g. PA), should be written as follows: ‘The APU’s findings that ...? but, NB, the plural is APUs.
9. All acronyms for national agencies, examinations, etc., should be spelled out the first time they are introduced in text or references. Thereafter the acronym can be used if appropriate, e.g. "The work of the Assessment of Performance Unit (APU) in the early 1980s ..."Subsequently, "The APU studies of achievement ..." in a reference ... (Department of Education and Science [DES] 1989a).
10. Brief biographical details of significant national figures should be outlined in the text unless it is quite clear that the person concerned would be known internationally. Some suggested editorial emendations to a "typical"text are indicated in the following with square brackets: "From the time of H. E. Armstrong [in the 19th century] to the curriculum development work associated with the Nuffield Foundation [in the 1960s], there has been a shift from heurism to constructivism in the design of [British] science courses?"
11. The preferred local (national) usage for ethnic and other minorities should be used in all papers. For the USA, "African-American" "Hispanic"and "Native American"are used, e.g. "The African American presidential candidate, Jesse Jackson..." for the UK, "Afro-Caribbean"(not "West Indian", etc.
12. Material to be emphasized (italicized in the printed version) should be underlined in the typescript rather than italicized. Please use such emphasis sparingly.
13. When using a word which is or is asserted to be a proprietary term or trade mark authors?must use the symbol ?or TM or alternatively a footnote can be inserted using the wording below:
This article includes a word which is or is asserted to be a proprietary term or trade mark. Its inclusion does not imply it has acquired for legal purposes a non-proprietary or general significance, nor is any other judgement implied concerning its legal status.
14. % (not per cent) should be used in typescripts.
15. Numbers in text should take the following forms: 300, 3000, 30 000. Spell out numbers under 10 unless used in a unit of measure e.g. nine pupils but 9 mm (do not introduce periods with measure). For decimals, use the form 0.05 (not 0.5).
Numbers, units and abbreviations
Numbers one to nine should be spelt out unless qualifying a unit measurement e.g. 3 cm, 6 days. Fractions should be decimalized or spelt out. SI (metric) units should be used e.g. cm. Dates should take the form: 14 January 1991.
Abbreviations used in the journal are: a.e., acid equivalent; a.i., active ingredient; ANOVA, analysis of variance; ANCOVA, analysis of covariance; b.p., boiling point; c.d.a., controlled droplet application; cv., cultivar; d.a.e., days after emergence; d.a.p., days after planting; d.a.s., days after sowing; d.a.t., days after transplanting; e.c., emulsifiable concentrate; LC50, median lethal dose; m.p., melting point; post-em., post emergence; pre-em., pre-emergence; u.l.v., ultra low volume; var., variety; volume median diameter; w.p., wettable powder.
Nomenclature
All common names of organisms, except crops, should be qualified at the first mention by the full Latin name and taxonomic authority. Fungi with two names should be referred to by their perfect name with the imperfect name in parentheses at the first mention. Taxonomic affiliation (e.g. Diptera; Diopsidae) should also be given at the first mention of an organism’s name. Pesticides should be referred to by their accepted common names, with trade names and manufacturers given as a footnote. Where there is no accepted common name the trade name or code number may be used with the chemical formula in parentheses.
Data presentation and statistical analysis
The same data must not be given in both tables and figures. After performing an analysis of variance (ANOVA), further simultaneous testing of treatment means should not be presented, except for specific comparisons planned before the experiment. Authors are strongly advised to consult the following publications: Eberhardt & Thomas (1991) Designing environmental field studies, Ecological Monographs, 61 (1): 53?3; Day and Quin (1989) Comparisons of treatments after analysis of variance in ecology, Ecological Monographs, 59 (4): 433?63; Hurlbert (1984) Pseudoreplication and the design of ecological experiments, Ecological Monographs, 54 (2): 187?11; Scheiner & Gurevitch (1993) Design and Analysis of Ecological Experiments, Chapman & Hall, London, ISBN 0-412-03561-8. Simple measures of variability (standard error, confidence limits) should always accompany means.
Notes on tables and figures
Artwork submitted for publication will not be returned and will be destroyed after publication, unless you request otherwise. Whilst every care is taken of artwork, neither the Editor nor Taylor & Francis shall bear any responsibility or liability for non-return, loss, or damage of artwork, nor for any associated costs or compensation. You are strongly advised to insure appropriately.
1. Tables and figures should be valuable, relevant, and visually attractive. Tables and figures must be referred to in the text and numbered in order of their appearance. Each table and figure should have a complete, descriptive title; and each table column an appropriate
heading.
Tables and figures should be referred to in text as follows: figure 1, table 1, i.e. lower case. ‘As seen in table [or figure] 1 ...?(not Tab., fig. or Fig).
2. The place at which a table or figure is to be inserted in the printed text should be indicated clearly on a manuscript:
[Insert table 2 about here ]
3. Each table and/or figure must have a title that explains its purpose without reference to the text.
4. All figures and tables must be on separate sheets and not embedded in the text. Original copies of figures should be supplied. All figures should allow for reduction to column width (130 mm) or page width (160mm). Please avoid figures that would require landscape reproduction, i.e., reading from bottom to top of the page. Photographs may be sent as glossy prints or negatives.
Please number each figure on the reverse in pencil.
Do not type the caption to a figure on that figure; the legends to any illustrations must be typed separately following the main text and should be grouped together.
Mathematics
Special care should be taken with mathematical scripts, especially subscripts and superscripts and differentiation between the letter 'ell' and the figure one, and the letter 'oh 'and the figure zero. If your keyboard does not have the characters you need, it is preferable to use longhand, in which case it is important to differentiate between capital and small letters, K, k and x and other similar groups of letters. Special symbols should be highlighted in the text and explained in the margin. In some cases it is helpful to supply annotated lists of symbols for the guidance of the sub-editor and the typesetter, and/or a "Nomenclature"section preceding the "Introduction"
For simple fractions in the text, the solidus / should be used instead of a horizontal line, care being taken to insert parentheses where necessary to avoid ambiguity, for example, I /(n-1). Exceptions are the proper fractions available as single type on a keyboard.
Full formulae or equations should be displayed, that is, written on a separate line. Horizontal lines are preferable to solidi, for example:
The solidus is not generally used for units: ms - 1 not m/s, but note electrons/s, counts/channel, etc.
Displayed equations referred to in the text should be numbered serially (1, 2, etc.) on the right hand side of the page. Short expressions not referred to by any number will usually be incorporated in the text.
Symbols should not be underlined to indicate fonts except for tensors, vectors and matrices, which are indicated with a wavy line in the manuscript (not with a straight arrow or arrow above) and rendered in heavy type in print: upright sans serif r (tensor), sloping serif r (vector) upright serif r (matrix).
Typographical requirements must be clearly indicated at their first occurrence, e.g. Greek, Roman, script, sans serif, bold, italic. Authors will be charged for corrections at proof stage resulting from a failure to do so.
Braces, brackets and parentheses are used in the order {[( )]}, except where mathematical convention dictates otherwise (i.e. square brackets for commutators and anticommutators)
Acknowledgements
Any acknowledgements authors wish to make should be included in a separate headed section at the end of the manuscript. Please do not incorporate these into the bionote or notes.
Book reviews
1. The following header material should appear in all reviews in the following order (note also the punctuation):
The Politics of Social Research. By Martyn Hammersley (Sage, London, 1995), 192 pp., ?5.00 (hbk), ISBN 0-8039-7718-2, ?1.95 (pbk), ISBN 0-8039-7719.
2. Page references within reviews should be given as follows: (p. 337) or (pp. 36-37).
Citations in text
1. "Ibid."(and the like) are not used when repeating citations. Simply repeat the original citation verbatim, e.g. (Orwell 1945).
2. Citations should be included in prefatory material to quotes (wherever possible) rather than placing them at the end. Thus, for example, "Orwell (1945: 23) reduces the principles of animalism to seven commandments, namely, ..."is preferred to "Orwell reduced the principles of animalism to seven commandments, namely, ... (Orwell 1945: 23)"
3. Multiple citations within parentheses should be divided by a comma, not a semi-colon, and there should be no use of amp;within such multiple references. References to works published in the same year should be cited as, e.g. (Smith 1991a, b).
4. Multiple citations within a text should be ordered by date, not alphabetically by authors name, e.g. (Smith 1902, Jones and Bower 1934, Brown 1955, 1958a, b, Green 1995).
5. ?I>et al.?may be used in references within the text when a paper or book has three or more authors, but note that all names should be given in the reference itself.
6. Page spans in references should be given in full, e.g. "Sedgewick (1935: 102-103; emphasis added) outlines them as follows:"
References
International Journal of Pest Management uses the following conventions for references:
1. Reference to a book:
Waterhouse, D. F. and Norris, K. R., 1987. Biological Control: Pacific prospects (Inaka Press), pp. 454 -56.
2. Reference to a chapter in a book:
Katan, J., 1987. Soil solarization. In Ilan Chet (ed.) Innovative Approaches to Plant Disease Control (New York: John Wiley & Sons), pp. 77-05.
3. Reference to an article in a journal:
Oatman, E. R. and Kennedy, G. G., 1976. Methomyl-induced outbreaks of Liriomyza sativae on tomato. Journal of Economic Entomology, 69, 667-68.
4. Reports and unpublished literature
Anonymous. Leafminers in chrysanthemum cut flowers from Colombia. Official Transcript before USDA, College Park, Maryland, April 20, 1982.
5. Reference to a newspaper or magazine
Richards, H., 1996, Republican lite The Times Higher Education Supplement, 1 November, 16.
6. Reference to an Internet source
Give the universal resource locator in full:
http://acsinfo.acs.org/instruct/instruct.html
7. Reference to a personal communication
In text only:
Brannen, J., 1996, Personal communication.
8. Reference to a case in law
In text, italicize names of plaintiffs and defendants:
Miranda v. Arizona 1974
9. Reference to government legislation
US Congress, Senate Committee on Foreign Relations, 1956, The Mutual Security Act of 1956, 84th Congress, second session, report 2273.
Electronic Submission
We strongly encourage you to send us the final, revised version of your article in both hard (paper) and electronic (disk) forms. This Guide sets out the procedures which will assure we can process your article efficiently. It is divided into three sections:
- a guide for authors using standard word-processing software packages
- a guide for authors using LaTeX mathematical software packages
- a guide for authors using graphics software packages
There are some general rules which apply to all three options.
- these guides do not apply to authors who are submitting an article for consideration and peer review; they apply only to authors whose articles have been reviewed, revised, and accepted for publication
- print out your hard (paper) copy from the disk you are sending; it is essential that the hard-copy printout is identical to the material on the disk; where versions differ, the hard copy will take precedence. We advise that you maintain back-ups of your files
- save and send your files on a standard 3.5 inch high density disk (Mac or PC); please do not attempt to send the article via file transfer protocol or email
- when saving your article onto a disk, please make sure that the files do not exceed a manageable size. Please ensure that figures are saved on a separate disk
- ensure that the files are not saved as read only
- virus-check your disk before sending it to the Editor
- label your disk
- package disks in such a way as to avoid damage in the post
- disks are not returnable after publication
1. A guide for authors using standard word-processing software packages
For the main text of your article, most standard PC or Mac word-processing software packages are acceptable, although we prefer Microsoft Word in a PC format.
Word-processed files should be prepared according to the journal style.
Avoid the use of embedded footnotes. For numbered tables, use the table function provided with the word-processing package.
All text should be saved in one file with the complete text (including the title page, abstract, all sections of the body of the paper, references), followed by numbered tables and the figure captions.
You should send the following to the Editor:
- a 3.5-inch disk containing the final, accepted version of the paper
- include an ASCII/text only version on the disk as well as the word processed version if possible
- two hard copy printouts
Disks should be clearly labelled with the following information:
1. Journal title
2. Name of author
3. File names contained on disk
4. Hardware used (PC or Mac)
5. Software used (name and version)
Sample disk label: text
|
Journal title |
|
A.N. Author |
|
article.doc |
|
IBM PC |
|
MS Word for Windows 7.0 |
2. A guide for authors using LaTeX mathematical software packages
Authors who wish to prepare their articles using the LaTeX document preparation system are advised to use article.sty (for LaTex 2.09) or article.cls (for LaTex2e).
The use of macros should be kept to an absolute minimum but if any are used they should be gathered together in the file, just before the \begin{document} command
You should send the following to the Editor:
- a 3.5-inch disk containing the final, accepted version of the paper
- the files you send must be text-only (often called an ASCII file), with no system-dependent control codes
- two hard copy printouts
Disks should be clearly labelled with the following information:
1. Journal title
2. Name of author
3. File names contained on disk
4. Hardware used (PC or Mac)
5. Software used (name and version)
Editorial Board
|
Editor:
Mark A. Jervis - School of Pure and Applied Biology, University of Wales College of Cardiff, PO Box 915, Cardiff CF1 3TL, UK
Tel: +44 (0)1222 874948
Fax: +44 (0)1222 874305
International Editorial Advisory Panel:
A. Berryman - Washington State University, Pullman, WA, USA
Jiaan Cheng - Zhejiang Agriculture University, Hangzhou, PR China
D. J. Greathead - NERC Centre for Population Biology, Ascot, Berkshire, UK
K. L. Heong - International Rice Research Institute (IRRI), Manila, The Philippines
O. T. Jones - AgriSense-BCS Limited, Pontypridd, Mid Glamorgan, UK
I. Manwan - Ministry of Agriculture, Agency for Agricultural Research and Development, Indonesia
G. Norton - Cooperative Research Centre for Tropical Pest Management, University of Queensland, Brisbane, Australia
D. R. Penman - Landcare Research, Lincoln, New Zealand
J. Perfect - Natural Resources Institute, Chatham Maritime, Kent, UK
Yoshito Suzuki - Laboratory of Pest Management Systems, Kyushu National Agricultural Experiment Station, Nishigoshi, Kumamoto, Japan
Larry Trevathan - Mississippi State University, MS, USA
H. F. van Emden - University of Reading, Reading, Berkshire, UK
J. C. van Lenteren - Agricultural University, EH Wageningen, The Netherlands
J. M. Waller - CAB International Mycological Institute, Kew, Surrey, UK
S. D. Wratten - Lincoln University, Canterbury, New Zealand |
| 
