期刊名称：ELECTRIC POWER SYSTEMS RESEARCH
 期刊简介(About the journal)
投稿须知(Instructions to Authors)
编辑部信息(Editorial Board)
About the journal
Electric Power Systems Research is an international medium for the publication of original papers concerned with the generation, transmission, distribution and utilization of electrical energy. The journal aims to present to the international community important results of work in this field, whether in the form of research, development, application or design. The scope of Electric Power Systems Research is broad, encompassing all aspects of electric power systems. The following list of topics is not intended to be exhaustive, but rather to indicate topics that fall within the journal's purview.
Generation techniques ranging from advances in conventional electromechanical methods, through nuclear power generation, to discoveries in solar related generation.
Transmission, spanning the broad area from UHV development to line routing and design.
Substation work: equipment design, protection and control systems.
Distribution techniques - underground installation and equipment development.
The utilization area from energy conservation methods to distributed load levelling techniques.
Systems studies including control techniques and planning.
Audience
Electrical Engineers, Power Systems Engineers, Energy Policy Makers, Energy Researchers, Energy Industries, Power Plants
Abstracting / Indexing
- Current Contents
- EI Compendex Plus
- Ei Engineering
- Energy Science and Technology
- Environmental Abstracts
|
- Fuel and Energy Abstracts
- INSPEC
- ISI SciSearch
- PASCAL/CNRS
|
Instructions to Authors
Language
Papers will be published in English. Authors should remember however that the Journal is international and widely read by those who are not of English mother tongue. Clarity and precision are best achieved by the use of short words and simple sentences. Authors for whom English is not their first language are urged to seek assistance in style, syntax and grammar.
Submission of Manuscripts
Authors are invited to submit manuscripts (original and two clear copies) to the one of the following Editors, according to geographical location. For the final version, in addition to the original and two copies, authors should submit an electronic version of their manuscript on disk.
For details of electronic submission consult http://authors.elsevier.com
Editor-in-Chief
Professor B. Don Russell
Texas A&M University
Department of Electrical Engineering
3128 TAMU
College Station, TX 77843-3128
USA
Regional Editor for Asia
Professor L. Goel
School of Electrical and Electronic Engineering
Nanyang Technology University, Block S1
Nanyang Avenue
Singapore 639798
Regional Editor for Europe and Africa
Dr G. Andersson
Electric Power System Group
ETH - Zentrum, ETL G26
CH - 8092 Zurich
Switzerland
Associate Editor
Dr J. D Morgan
Vice President for University Advancement
The Univesity of Alabama in Huntsville
102 Alumni House
Huntsville, AL 35899
USA
Contributions are accepted on the understanding that the authors have obtained the necessary authority for publication. Submission of an article is understood to imply that the article is original and unpublished and is not being considered for publication elsewhere. Upon acceptance of an article by the journal, the author(s) will be asked to transfer the copyright of the article to the publisher. This transfer will ensure the widest possible dissemination of information.
Preparation of Manuscripts
Manuscripts should be typed in double spacing, on one side only, on consecutively numbered pages of uniform size with a wide margin on the left. Papers should be headed by a concise but informative title. This should be followed by the name(s) of the author(s) and by the name and address of the laboratory where the work was carried out. If the address of the author(s) at the time when the paper will appear is other than the laboratory in which the work was carried out, this may be stated in a footnote. The name and complete address of the person to whom proofs are to be sent must be given. Recognition of financial support should not be made by a footnote to the title or name(s) of the author(s), but should be included in "Acknowledgements" at the end of the paper.
Authors usingword-processing/computer facilities for the preparation of manuscripts are urged to check very carefully their printouts for omissions. High-quality (daisy-wheel) printouts are preferred though output from printers using a high-density dot-matrix system with true descenders is acceptable. Authors must also remember that if after acceptance of their paper for publication they decide to submit minor revisions these variances with the originally accepted manuscript must be clearly indicated on the new printout.
Some flexibility of presentation will be allowed but authors are urged to arrange the subject matter clearly and logically under headings such as: Introduction, Experimental, Results, Discussion, etc.
Abstract
An abstract of 50 - 200 words should be included at the beginning of a full paper. No abstract is required for a Short Communication. Abstracts should be understandable in isolation, and reference to formulae and equations in the main text is thus not permissible.
Tables
Tables should be typed in double spacing on separate sheets and provided with a suitable heading. Tables should be clearly referred to in the text using Arabic numerals and an indication given in the margin of the manuscript as to the approximate position in which they should be placed. Considerable thought should be given to the layout of the tables (and figures) so that the significance of the results can be readily and quickly grasped by the busy reader. It is sometimes astonishing how much more easily a table of results can be understood if columns and lines are interchanged. Each table should have a title which makes the general meaning understandable without reference to the text.
Illustrations
Line drawings should be in a form suitable for direct reproduction, drawn in Indian ink on drawing or tracing paper (letter height 3 - 5 mm). One set of original drawings is required, together with two duplicate sets. Legends to illustrations should be typed in sequence on a separate page or pages and be understandable without reference to the text. They should begin with a title followed by any other necessary material describing the points or lines on the figure. Photographs, autoradiographs and electronmicrographs should be black and white glossy prints and as rich in contrast as possible. Where magnifications are concerned, it is preferable to indicate the scale by means of a ruled line on the photograph. An indication should be given in the margin of the manuscript at the approximate position in which each illustration should be placed.
References
The references should be brought together at the end of the article, and numbered in the order of their appearance in the text. Footnotes should not include bibliographic material. Authors should check whether every reference in the text appears in the list of references and vice versa. Numerals for references are given in square brackets []; equations should be numbered (1), (2), etc. In the text the authors' names are given without initials. When reference is made to a publication written by more than two authors, it is preferable to give only the first author's name in the text followed by "et al.". However, in the list of references the names and initials of all authors must be given. Should there be more than three authors, only the first is named and the words "et al." added. In the reference list, periodicals [1], books [2], and multi-author books [3], should be cited in accordance with the following examples:
1 G. Ledwich and T. Jordan, Electr. Power Syst. Res., 5 (1982) 299-306.
2 W. D. Stevenson, Jr., Elements of Power System Analysis, McGraw-Hill, New York, 4th edn., 1982, pp. 275~289.
3 R. D. Marshall and A. Neuberger, in A. Gottschalk (ed.), Glycoproteins, Vol. 5, Part A, Elsevier, Amsterdam, 2nd edn., 1972, Ch. 3, p. 215.
4 D. Rumpel, R. Zaluk and U. Post, Concept of an on-line data base supporting grid data language, Proc. 9th Power Systems Computation Conf. (PSCC), Cascais, Portugal, 1987, Butterworths, London, pp. 352- 358.
Abbreviations for the titles of journals should follow the system used by Chemicals Abstracts Service Source Index, 1970 edition, and supplements. Articles not yet published should be given as "in press", "submitted for publication", "in preparation" or "personal communication".
Nomenclature, Units and Abbreviations
A list of mathematical symbols used in the paper should be provided at the end of the paper before the References. Authors must express all quantities in SI units, with other units in parenthesis if desired. Scientific abbreviations may be used, and special abbreviations should be declared the first time they occur.
Symbols, Formulae and Equations
Symbols, formulae and equations should be written with great care, capitals and lower case letters being distinguished where necessary. Also a clear distinction in typewritten text should be made between the figure 1 (one) and the lower case l (ell), the letters "o" and zero, "k" and kappa, "u" and mu, "v" and nu, and "n" and eta. Particular care should be taken in writing mathematical expressions containing superscripts and subscripts. Greek letters and unusual symbols employed for the first time should be defined by name in the left-hand margin.
The solidus / may be used in equations to economize vertical space but its use should be consistent. For example:
A/b= x2/(u + v)1/2 but it is pointless to write A/b = x2 / (u + v)1/2
It is recommended that natural logarithms should be denoted by ln while decade logarithms should be denoted by lg.
The multiplication sign should be used in floating point numbers to avoid confusion, i.e. 4.25 x 105, not 4.25 105. The decimal point should always be denoted by a full stop.
To avoid the confusion that results from the differing uses of the comma and full stop, we recommend separating the digits by a space into groups of three, counting left or right from the decimal sign (not necessary with a four-digit number). For example: 16 132 4372 8.2487 1.232 843
Proofs
Authors will receive galley proofs, which they are requested to correct and return as soon as possible. Elsevier will do everything possible to get your article corrected and published as quickly and accurately as possible. Therefore, it is important to ensure that all of your corrections are sent back to us in one communication. Subsequent corrections will not be possible, so please ensure your first sending is complete.'
Reprints
Twenty five reprints are provided free of charge. Further copies can be ordered at prices shown on the reprint order form which will accompany the galley proofs.
There are no page charges.
Author Enquiries
Authors can keep track of the progress of their accepted article, and set up email alerts informing them of changes to the status of their article, by using the "Track a Paper" feature of Elsevier's Author Gateway http://authors.elsevier.com.
For enquiries relating to the preparation of electronic artwork also consult: http://authors.elsevier.com
Contact details for questions arising after acceptance of an article, especially those relating to proofs, are provided when an article is accepted for publication.
Editorial Board
Editor-in-Chief:
Prof. B.D. Russell, Associate Vice Chancellor for Engineering, Texas A&M University, Department of Electrical Engineering, 3128 TAMU, College Station, TX 77843-3128, USA Tel: +1 979 845 7912, Fax: +1 979 845 8986, Email: bdrussell@tamu.edu
Executive Editor:
Dr. C.R. Haden, College Station, TX, USA
Founding Editor-in-Chief:
M.E. Council, Ruston, LA, USA
Regional Editor for Asia:
Prof. L. Goel, School of Electrical and Electronic Engineering, Nanyang Technology University, Block S1, Nanyang Avenue, Singapore 639798 Tel: +65 67 90 4542, Fax: +65 67 91 2687, Email: elkgoel@ntu.edu.sg
Regional Editor for Europe and Africa:
Dr G. Andersson, Electric Power Systems Group, ETH - Zentrum, ETL G26, CH - 8092 Zurich, Switzerland Tel: +41 1 632 0816, Fax: +41 1 632 1252, Email: andersson@eeh.ee.ethz.ch or g.anderson@ieee.org
Associate Editor:
Dr. J.D. Morgan, The University of Alabama in Huntsville, 102 Alumni House, Huntsville, AL 35899, USA Tel: +1 256 824 6127, Fax: +1 256 824 6462, Email: morganjd@email.uah.edu
Editorial Advisory Panel:
B.M. Aucoin, College Station, TX, USA
C. Canizares, Ontario, Canada
M.-S. Chen, Arlington, TX, USA
P.S.M. Chin, Singapore
O. Fosso, Trondheim, Norway
R.K. Green, Jr., Dallas, TX, USA
R.G. Harley, Durban, South Africa
T.A. Haskew, Tuscaloosa, AL, USA
M. Kezunovic, College Station, TX, USA
O.P. Malik, Calgary, Alta, Canada
C.A. Nucci, Bologna, Italy
A.G. Phadke, Blacksburg, VA, USA
N. Prasad, Las Cruces, NM, USA
H.B. P¨¹ttgen, Atlanta, GA, USA
S. Ranade, Las Cruces, NM, USA
L. Rouco, Madrid, Spain
A.P. Sakis Meliopoulos, Atlanta, GA, USA
H. Sasaki, Hiroshima, Japan
R. Smith, St. Petersburg, FL, USA
H. Smolleck, Las Cruces, NM, USA
G. Strbac, Manchester, UK
D. Sutanto, Kowloon, Hong Kong
H. Tanaka, Yokohama, Japan
E.A. Udren, Coral Springs, FL, USA
B.F. Wollenberg, Minneapolis, MN, USA
K.P. Wong, Kowloon, Hong Kong Tel: Kowl
F. Wu, Berkeley, CA, USA
|
