期刊名称：JOURNAL OF ATMOSPHERIC CHEMISTRY
 期刊简介(About the journal)
投稿须知(Instructions to Authors)
编辑部信息(Editorial Board)
About the journal
|
The Journal of Atmospheric Chemistry is devoted to the study of the chemistry of the Earth's atmosphere, the emphasis being laid on the region below about 100 km. The strongly interdisciplinary nature of atmospheric chemistry means that it embraces a great variety of sciences, but the journal concentrates on the following topics:
- Observational, interpretative and modelling studies of the composition of air and precipitation and the physiochemical processes in the Earth's atmosphere, excluding air pollution problems of local importance only.
- The role of the atmosphere in biogeochemical cycles; the chemical interaction of the oceans, land surface and biosphere with the atmosphere.
- Laboratory studies of the mechanics in homogeneous and heterogeneous transformation processes in the atmosphere.
- Descriptions of major advances in instrumentation developed for the measurement of atmospheric composition and chemical properties.
|
|
Instructions to Authors
Manuscript Submission
Kluwer Academic Publishers request the submission of manuscripts and figures in electronic form inaddition to a hard-copy printout. The preferred storage medium for your electronic manuscript is a 3 1/2 inch diskette. Please label your diskette properly, giving exact details on the name(s) of the file(s), the operating system and software used. Always save your electronic manuscript in the word processor format that you use; conversions to other formats and versions tend to be imperfect. In general, use as few formatting codes as possible. For safety's sake, you should always retain a backup copy of your file(s). After acceptance, please make absolutely sure that you have send the latest (i.e., revised) version of your manuscript, both as hard-copy printout and on diskette (submission in electronic form of the final version of your article is compulsory).
Kluwer Academic Publishers prefer articles submitted in word processing packages such as MS Word, WordPerfect, etc. running under operating systems MS DOS, Windows and Apple Macintosh, or in the file format LaTeX. Articles submitted in other software programs can also be accepted.
For submission in LaTeX, Kluwer Academic Publishers have developed a Kluwer LaTeX class file, which can be downloaded from: http://www.wkap.nl/authors/jrnlstylefiles/
Use of this class file is highly recommended. Do not use versions downloaded from other sites. Technical support is available at: texhelp@wkap.nl. If you are not familiar with TeX/LaTeX, the class file will be of no use to you. In that case, submit your article in a common word processor format.
Manuscripts intended for publication should be written in English and should be submitted to either the Journals Editorial Office or to one of the Editors in the following way: papers from North America should be submitted to Prof Elliot L. Atlas, papers from Asia should be submitted to Dr Hajime Akimoto and papers from the rest of the world should be submitted to: Kluwer Academic Publishers
Journals Editorial Office
Journal of Atmospheric Chemistry
P.O. Box 990
3300 AZ Dordrecht
The Netherlands
Please send together with the manuscript the names and addresses (including e-mail addresses) of five possible reviewers.
Manuscript Presentation
British English or American English spelling and terminology should be used consistently throughout the article. Manuscripts should be printed or typewritten on A4 or US Letter bond paper, one side only, leaving adequate margins on all sides to allow reviewers?remarks. Please double-space all material, including notes and references. Quotations of more than 40 words should be set off clearly, either by indenting the left-hand margin or by using a smaller typeface. Use double quotation marks for direct quotations and single quotation marks for quotations within quotations and for words or phrases used in a special sense.
Number the pages consecutively with the first page containing:
- running head (shortenend title);
- article type;
- title;
- author(s);
- affiliation(s);
- full address for correspondence, including telephone and fax number and e-mail address.
Abstract
Please provide a short abstract of 100 to 250 words. The abstract should not contain any undefined abbreviations or unspecified references.
Key Words
Please provide approximately 5 key words in alphabetical order.
Figures and TablesSubmission of electronic figures
In addition to hard-copy printouts of figures, authors are requested to supply the electronic versions of figures in either Encapsulated PostScript (EPS) or TIFF format. Many other formats, e.g., Microsoft Postscript, PiCT (Macintosh) and WMF (Windows), cannot be used and the hard copy will be scanned instead.
Figures should be saved in separate files without their captions, which should be included with the text of the article. Files should be named according to DOS conventions, e.g., ’figure1.eps? For vector graphics, EPS is the preferred format. Lines should not be thinner than 0.25pts and in-fill patterns and screens should have a density of at least 10%. Font-related problems can be avoided by using standard fonts such as Times Roman and Helvetica. For bitmapped graphics, TIFF is the preferred format but EPS is also acceptable. The following resolutions are optimal: black-and-white line figures - 600 - 1200 dpi; line figures with some grey or coloured lines - 600 dpi; photographs - 300 dpi; screen dumps - leave as is. Higher resolutions will not improve output quality but will only increase file size, which may cause problems with printing; lower resolutions may compromise output quality. Please try to provide artwork that approximately fits within the typeset area of the journal. Especially screened originals, i.e. originals with grey areas, may suffer badly from reduction by more than 10-15%. Avoiding problems with EPS graphics
Please always check whether the figures print correctly to a PostScript printer in a reasonable amount of time. If they do not, simplify your figures or use a different graphics program.
If EPS export does not produce acceptable output, try to create an EPS file with the printer driver (see below). This option is unavailable with the Microsoft driver for Windows NT, so if you run Windows NT, get the Adobe driver from the Adobe site (www.adobe.com).
If EPS export is not an option, e.g., because you rely on OLE and cannot create separate files for your graphics, it may help us if you simply provide a PostScript dump of the entire document. How to set up for EPS and postscript dumps under Windows 95/98
Create a printer entry specifically for this purpose: install the printer ’Apple Laserwriter Plus?and specify ’FILE? as printer port. Each time you send something to the ’printer?you will be asked for a filename. This file will be the EPS file or PostScript dump that we can use.
The EPS export option can be found under the PostScript tab. EPS export should be used only for single-page documents. For printing a document of several pages, select ’Optimise for portability?instead. The option ’Download header with each job?should be checked. Submission of hard-copy figures
If no electronic versions of figures are available, submit only high-quality artwork that can be reproduced as is, i.e., without any part having to be redrawn or re-typeset. The letter size of any text in the figures must be large enough to allow for reduction. Photographs should be in black-and-white on glossy paper. If a figure contains colour, make absolutely clear whether it should be printed in black-and-white or in colour. Figures that are to be printed in black-and-white should not be submitted in colour. Authors will be charged for reproducing figures in colour.
Each figure and table should be numbered and mentioned in the text. The approximate position of figures and tables should be indicated in the margin of the manuscript. On the reverse side of each figure, the name of the (first) author and the figure number should be written in pencil; the top of the figure should be clearly indicated, figures and tables should be placed at the end of the manuscript following the Reference section. Each figure and table should be accompanied by an explanatory legend. The figure legends should be grouped and placed on a separate page. Figures are not returned to the author unless specifically requested.
In tables, footnotes are preferable to long explanatory material in either the heading or body of the table. Such explanatory footnotes, identified by superscript letters, should be placed immediately below the table.
Section Headings
Section headings should be numbered (e.g., 1., 1.1, 1.1.1, 2., 2.1, etc.).
Appendices
Supplementary material should be collected in an Appendix and placed before the Notes and Reference sections.
Notes
Please use footnotes rather than endnotes. A source reference note should be indicated by means of an asterisk after the title. This note should be placed at the bottom of the first page.
Cross-Referencing
In the text, a reference identified by means of an author‘s name should be followed by the date of the reference in parentheses and page number(s) where appropriate. When there are more than two authors, only the first author‘s name should be mentioned, followed by ’’et al‘‘. In the event that an author cited has had two or more works published during the same year, the reference, both in the text and in the reference list, should be identified by a lower case letter like ’’a‘‘ and ’’b‘‘ after the date to distinguish the works.
Acknowledgements
Acknowledgements of people, grants, funds, etc. should be placed in a separate section before the References.
References
References to books, journal articles, articles in collections and conference or workshop proceedings, and technical reports should be listed at the end of the article in alphabetical order. Articles in preparation or articles submitted for publication, unpublished observations, personal communications, etc. should not be included in the reference list but should only be mentioned in the article text (e.g., T. Moore, personal communication).
References to books should include the author‘s name; year of publication; title; page numbers where appropriate; publisher; place of publication, in the order given in the example below.
Stull, R. B., 1991: An Introduction to Boundary Layer Meteorology, Kluwer Academic Publishers, London, pp. 347-404.
References to articles in an edited collection should include the author‘s name; year of publication; article title; editor‘s name; title of collection; first and last page numbers; publisher; place of publication, in the order given in the example below.
Raatz, W. E., 1991: The climatology and meteorology of Arctic air pollution, in W. T. Sturges (ed.), Pollution of the Arctic Atmosphere, pp. 13-42.
References to articles in conference proceedings should include the author‘s name; year of publication; article title; editor‘s name (if any); title of proceedings; first and last page numbers; place and date of conference; publisher and/or organization from which the proceedings can be obtained; place of publication, in the order given in the example below.
Rahn, K. A., 1982: On the causes, characteristics and potential environmental effects of aerosol in the arctic atmosphere, Proc. Conf. on the Arctic Ocean: The Hydrographic Environment and the Fate of Pollutants, pp. 163-195.
References to articles in periodicals should include the author‘s name; year of publication; article title; full title of periodical; volume number (issue number where appropriate); first and last page numbers, in the order given in the example below.
Stelson, A. W. and Seinfeld, J. H., 1982: Relative humidity and temperature dependence of the ammonium nitrate dissociation constant, Atmos. Environ. 16, 983-992.
References to technical reports or doctoral dissertations should include the author‘s name; year of publication; title of report or dissertation; institution; location of institution, in the order given in the example below.
Duyzer, J. H., 1991: The influence of chemical reactions of surface exchange of NO, N02 and 03: results of experiments and model calculations, Report no. P91/029, TNO Institute of Environmental Sciences, Delft, The Netherlands.
Proofs
Proofs will be sent to the corresponding author by e-mail (if no e-mail address is available or appears to be out of order, proofs will be sent by regular mail).
Your response, with or without corrections, should be sent within 72 hours. Please do not make any corrections to the PDF file.
Minor corrections (+/- 10) should be sent as an e-mail attachment to: proofscorrection@wkap.nl. Always quote the four-letter journal code and article number and the PIPS No. from your proof in the subject field of your e-mail.
Extensive corrections must be clearly marked on a printout of the PDF file and should be sent by first-class mail (airmail overseas).
Offprints
Twenty-five offprints of each article will be provided free of charge. Additional offprints (both hard copies and PDF files) can be ordered by means of an offprint order form supplied with the proofs.
Page Charges and Colour Figures
No page charges are levied on authors or their institutions. Colour figures are published at the author‘s expense only.
Copyright
Authors will be asked, upon acceptance of an article, to transfer copyright of the article to the Publisher. This will ensure the widest possible dissemination of information under copyright laws.
Permissions
It is the responsibility of the author to obtain written permission for a quotation from unpublished material, or for all quotations in excess of 250 words in one extract or 500 words in total from any work still in copyright, and for the reprinting of figures, tables or poems from unpublished or copyrighted material.
Additional Information
Additional information can be obtained from: Publishing Editor
Atmospheric and Oceanographic Sciences
Van Godewijckstraat 30
P.O. Box 17
3300 AA Dordrecht
The Netherlands
Tel.: +31(0)78 6576152
Fax: +31(0)78 6576388
Editorial Board
Editor:
Andreas Wahner
Institute for Atmospheric Chemistry
Forschungszentrum Julich
Leo Brandstr.
D-52425 Julich
Germany
Hajime Akimoto
Research Center for Advanced Science and Technology
University of Tokyo
4-6-1 Komaba, Meguro-ku
Tokyo 153
Japan
Roderic L. Jones
Department of Chemistry
University of Cambridge
Lensfield Road
Cambridge, CB2 1EW
U.K.
Elliot L. Atlas
National Centre for Atmospheric Research
P.O. Box 3000
Boulder, CO 80307
U.S.A.
Book Reviews Editor
Peter Warneck
Max Planck Institute for Chemistry
Department of Biochemistry
Postbox 3060
D-55020 Mainz
Germany
Editorial Board:
J.G. Anderson, Harvard University, Cambridge, USA; R.A. Delmas, Universit?Paul Sabatier, Toulouse, France; P.J. Crutzen, Max Planck Institute for Chemistry, Mainz, Germany; D. Fahey, NOAA, Boulder, USA; J. Fishman, NASA, Hampton, VA, USA; P. Fraser, CSIRO, Aspendale, Vict., Australia; I. Galbally, CSIRO, Mordialloc, Australia; H.-W. Georgii, Johann-Wolfgang-Goethe-Universität, Frankfurt, Germany; M.R. Hoffmann, California Institute of Technology, Pasadena, USA; M. Ilyas, University of Science Malaysia, Penang, Malaysia; R. Jaenicke, Johannes-Gutenberg-Universität, Mainz, Germany; R.L. Jones, University of Cambridge, UK; J. Lelieveld, Max Planck Institute for Chemistry, Mainz, Germany; D.H. Lenschow, National Center for Atmospheric Research, Boulder, USA; P.S. Liss, University of East Anglia, Norwich, UK; G. Mégie, Universit?Pierre et Marie Curie, Paris, France; E. Mészáros, University of Veszprém, Hungary; A.P. Mitra, National Physical Laboratory, New Delhi, India; H.-U. Neue, International Rice Research Institute, Manila, Philippines; S. Penkett, University of East Anglia, Norwich, UK; M. Prather, University of California at Irvine, USA; H.R. Pruppacher, Johannes-Gutenberg-Universität, Mainz, Germany; J. Pyle, European Ozone Research Coordinating Unit, British Antarctic Survey, Cambridge, UK; H. Rodhe, Stockholm Universitet, Sweden; E. Sanhueza, Instituto Venezolano de Investigaciones Cientificas, Venezuela; W. Seiler, Fraunhofer-Institut, Garmisch-Partenkirchen, Germany; P.C. Simon, Institut d'Aeronomie Spatiale de Belgique, Brussels, Belgium; R.F. Weiss, Scripps Institution of Oceanography, La Jolla, USA
|
