期刊名称：MATERIALS LETTERS
 期刊简介(About the journal)
投稿须知(Instructions to Authors)
编辑部信息(Editorial Board)
About the journal
Materials Letters
Materials Letters is a fast publication journal on the science and technology of materials. The journal provides a rapid communication forum for scientists and engineers engaged in the field of ceramics, polymers, metals and alloys, composites and novel materials. The rapid publication of advances in these fields contributes to their further development and stimulates cross-fertilization and interdisciplinary studies.
|
Contributions include, but are not restricted to, a variety of topics such as:
Materials - crystalline and amorphous, synthetic superlattices and composites;
Novel materials - microstructures, nanostructures, thin films and fullerenes;
Characterisation - analytical, microscopic, acoustic, optical, spectroscopic and diffractive;
Properties - mechanical, magnetic, optical, electrical, interfacial, phase transformational and transport;
Applications - structural, opto-electronic, magnetic, smart materials, ferroelectrics, novel semiconductors, environmental materials;
Processing - crystal growth, beam processing, sol-gel processing and deformation processing;
Synthesis - high pressure, powder preparation, explosive forming, rapid quenching, extrusion and milling. |
 |
Abstracting / Indexing
- Ceramic Abstracts
- Chemical Abstracts
- Current Contents/Engineering, Computing and Technology
- Current Contents/Physical, Chemical, and Earth Sciences
- El Compendex Plus
|
- Engineering Index
- INSPEC
- Materials Science Citation Index
- Metal Abstracts (ASM International - Materials Information
- Science Citation Index
|
Instructions to Authors
Materials Letters is dedicated to publishing novel, cutting edge reports of broad interest to the materials community. The journal provides a forum for materials scientists and engineers, physicists, and chemists to rapidly communicate on the most important topics in the field in materials. We are primarily interested in those contributions which bring new insights, and papers will be selected on the basis of the importance of the new knowledge they provide.
Contributions include a variety of topics such as:
• Materials - Metals and alloys, amorphous solids, ceramics, composites, nanocrystals, polymers, semiconductors.
• Applications - Structural, opto-electronic, magnetic, medical, MEMS, sensors, smart, biomaterials.
• Characterization - Analytical, microscopy, scanning probes, nanoscopic, optical, electrical, acoustic, spectroscopic, diffraction.
• Novel Materials - Micro and nanostructures (nanowires, nanotubes, nanoparticles), nanocomposites, thin films, superlattices, quantum dots.
• Processing - Thin film processing, sol-gel processing, mechanical processing, assembly, and nanocrystalline processing leading to unique materials.
• Properties - Mechanical, magnetic, optical, electrical, ferroelectric, thermal, interfacial, transport, thermodynamic.
• Synthesis - Quenching, solid state, solidification, solution synthesis, vapor deposition, and high pressure, explosive processes leading to unique materials.
The following topics are inappropriate for publication:
Building materials - aggregate, asphalt, cement, concrete, plaster
Catalytic materials
Corrosion and oxidation phenomena and protection
Liquid crystals
Metallurgical Processes
Natural raw materials – clays, minerals, rocks
Oxide glasses and glass ceramics
Recycled materials
Refractories
Single crystal growth
Theory
Wear
Types of Contribution
Letters are intended as brief reports of significant, original and timely research results on the science, applications and processing of materials which warrant rapid publication. In considering a manuscript for publication, particular attention will be given to the originality of the research, the desirability of speedy publication, the clarity of the presentation and the validity of the conclusions. There is a strict four-page limit to printed articles. Manuscripts must not exceed 2000 words plus three figures and one table. The maximum number of figures is strictly limited to five. If the maximum of 5 figures is used, then the total number of words must be reduced to 1600. If more than 5 figures are used, the manuscript will be rejected. The manuscript submitted for review should not exceed 8 pages (including title, abstract, references, figures, tables and figure captions).
Contact Details
Authors should submit their article via the online submission system. Authors will be asked to choose the Editor whose subject area is most closely aligned to the subject of their article. Each Editor's specialties are given below. To expedite the review process, authors will also be prompted to nominate 3 potential referees, who are not at the same institute, to serve as potential referees. Contact details are helpful.
Principal Editors
Prof. Aldo Boccaccini, Editor in chief - Biomaterials, Glasses and Ceramics, Materials Processing, Porous Materials, Biocomposites, Mechanical Properties
Prof. J. Hojo - Nano-composites, Composites, Sol-gel preparation
Prof. T.G. Nieh - Metallic Alloys, Ceramics, Composites, High Temperature Materials, Mechanical Behavior, Material Processing
Prof. L.S. Shvindlerman - Nano-Crystalline Metals, Thermodynamics, Kinetics, Interfaces and Surfaces.
Prof. A.F.W. Willoughby - Semiconductor/Electronic Materials, Polymers
Online Submission
Authors must submit their articles using the secure online submission system at  http://ees.elsevier.com/mlblue.
To facilitate rapid publication, it is essential to precisely follow these instructions. Failure to do so can result in a delay or rejection of the manuscript for publication.
To ensure a timely review you will be required to answer the following questions before your paper will be considered for review.
• Has your paper, or part of your paper, been published before, or is it currently submitted for review to another journal?
Yes / No
(If yes, then do not submit your paper to Materials Letters.)
• Is the total number of words less than 2000?
Yes / No
(If greater than 2000, please reduce the number of words.)
• Is the number of figures greater than 5?
Yes / No
(If yes, then the paper will automatically be rejected.)
• Are the x-ray diffraction patterns indexed?
Yes / No
X-ray diffraction patterns should be indexed. (If your x-ray patterns are not indexed, the paper will be rejected for publication.)
• Do the micrographs have professional quality scale markers?
Yes / No
Professional scale bars should be added to micrographs; the bar included in the micrograph printout is not sufficient.
(Please replace the black bar on SEM & TEM micrographs with a professional quality scale marker.)
Ethics in Publishing
For information on Ethics in Publishing and Ethical guidelines for journal publication see http://www.elsevier.com/publishingethics and http://www.elsevier.com/ethicalguidelines.
Policy and ethics
The work described in your article must have been carried out in accordance with The Code of Ethics of the World Medical Association (Declaration of Helsinki) for experiments involving humans http://www.wma.net/e/policy/b3.htm; EC Directive 86/609/EEC for animal experiments http://ec.europa.eu/environment/chemicals/lab_animals/legislation_en.htm; Uniform Requirements for manuscripts submitted to Biomedical journals http://www.icmje.org. This must be stated at an appropriate point in the article.
Conflict of interest
All authors are requested to disclose any actual or potential conflict of interest including any financial, personal or other relationships with other people or organizations within three years of beginning the submitted work that could inappropriately influence, or be perceived to influence, their work. See also http://www.elsevier.com/conflictsofinterest.
Submission declaration
Submission of an article implies that the work described has not been published previously (except in the form of an abstract or as part of a published lecture or academic thesis), that it is not under consideration for publication elsewhere, that its publication is approved by all authors and tacitly or explicitly by the responsible authorities where the work was carried out, and that, if accepted, it will not be published elsewhere including electronically in the same form, in English or in any other language, without the written consent of the copyright-holder.
Copyright
Upon acceptance of an article, authors will be asked to complete a 'Journal Publishing Agreement' (for more information on this and copyright see http://www.elsevier.com/copyright). Acceptance of the agreement will ensure the widest possible dissemination of information. An e-mail will be sent to the corresponding author confirming receipt of the manuscript together with a 'Journal Publishing Agreement' form or a link to the online version of this agreement.
Subscribers may reproduce tables of contents or prepare lists of articles including abstracts for internal circulation within their institutions. Permission of the Publisher is required for resale or distribution outside the institution and for all other derivative works, including compilations and translations (please consult http://www.elsevier.com/permissions). If excerpts from other copyrighted works are included, the author(s) must obtain written permission from the copyright owners and credit the source(s) in the article. Elsevier has preprinted forms for use by authors in these cases: please consult http://www.elsevier.com/permissions.
Retained author rights
As an author you (or your employer or institution) retain certain rights; for details you are referred to: http://www.elsevier.com/authorsrights.
Role of the funding source
You are requested to identify who provided financial support for the conduct of the research and/or preparation of the article and to briefly describe the role of the sponsor(s), if any, in study design; in the collection, analysis and interpretation of data; in the writing of the report; and in the decision to submit the paper for publication. If the funding source(s) had no such involvement then this should be stated. Please see http://www.elsevier.com/funding.
Funding body agreements and policies
Elsevier has established agreements and developed policies to allow authors whose articles appear in journals published by Elsevier, to comply with potential manuscript archiving requirements as specified as conditions of their grant awards. To learn more about existing agreements and policies please visit http://www.elsevier.com/fundingbodies.
Language and language services
Please write your text in good English (American or British usage is accepted, but not a mixture of these). Authors who require information about language editing and copyediting services pre- and post-submission please visit http://www.elsevier.com/languageediting or our customer support site at http://epsupport.elsevier.com for more information.
Submission
Submission to this journal proceeds totally online and you will be guided stepwise through the creation and uploading of your files. The system automatically converts source files to a single PDF file of the article, which is used in the peer-review process. Please note that even though manuscript source files are converted to PDF files at submission for the review process, these source files are needed for further processing after acceptance. All correspondence, including notification of the Editor's decision and requests for revision, takes place by e-mail removing the need for a paper trail.
Referees
Please submit, with the manuscript, the names, addresses and e-mail addresses of 3 potential referees. Note that the editor retains the sole right to decide whether or not the suggested reviewers are used.
Use of wordprocessing software
It is important that the file be saved in the native format of the wordprocessor used. The text should be in single-column format. Keep the layout of the text as simple as possible. Most formatting codes will be removed and replaced on processing the article. In particular, do not use the wordprocessor's options to justify text or to hyphenate words. However, do use bold face, italics, subscripts, superscripts etc. Do not embed "graphically designed" equations or tables, but prepare these using the wordprocessor's facility. When preparing tables, if you are using a table grid, use only one grid for each individual table and not a grid for each row. If no grid is used, use tabs, not spaces, to align columns. The electronic text should be prepared in a way very similar to that of conventional manuscripts (see also the Guide to Publishing with Elsevier: http://www.elsevier.com/guidepublication). Do not import the figures into the text file but, instead, indicate their approximate locations directly in the electronic text and on the manuscript. See also the section on Electronic illustrations.
To avoid unnecessary errors you are strongly advised to use the "spell-check" and "grammar-check" functions of your wordprocessor.
Article structure
Follow this order when submitting manuscripts: Title, Authors, Affiliations, Abstract, Keywords, Main text, Acknowledgements, Appendix, References, Figure Captions and then Tables. For submission via the website you are requested to import low-resolution images into the article at the approximate location you wish them to appear. Thus the PDF which is created for refereeing purposes will contain all necessary information. In addition you will be asked to separately upload high quality images. Collate acknowledgements in a separate section at the end of the article and do not include them on the title page, as a footnote to the title or otherwise.
Text Layout
Use double spacing and wide (3 cm) margins. (Avoid full justification, i.e., do not use a constant right-hand margin.) Ensure that each new paragraph is clearly indicated. Present tables, figures and figure legends at the point they will appear in the manuscript. If possible, consult a recent issue of the journal to become familiar with layout and conventions. Number all pages consecutively, use 12 or 10 pt font size and standard fonts.
Subdivision - numbered sections
Divide your article into clearly defined and numbered sections. Subsections should be numbered 1.1 (then 1.1.1, 1.1.2, ...), 1.2, etc. (the abstract is not included in section numbering). Use this numbering also for internal cross-referencing: do not just refer to "the text". Any subsection may be given a brief heading. Each heading should appear on its own separate line.
Introduction
State the objectives of the work and provide an adequate background, avoiding a detailed literature survey or a summary of the results.
Material and methods
Provide sufficient detail to allow the work to be reproduced. Methods already published should be indicated by a reference: only relevant modifications should be described.
Theory/calculation
A Theory section should extend, not repeat, the background to the article already dealt with in the Introduction and lay the foundation for further work. In contrast, a Calculation section represents a practical development from a theoretical basis.
Results
Results should be clear and concise.
Discussion
This should explore the significance of the results of the work, not repeat them. A combined Results and Discussion section is often appropriate. Avoid extensive citations and discussion of published literature.
Conclusions
The main conclusions of the study may be presented in a short Conclusions section, which may stand alone or form a subsection of a Discussion or Results and Discussion section.
Essential title page information
• Title. Concise and informative. Titles are often used in information-retrieval systems. Avoid abbreviations and formulae where possible.
• Author names and affiliations. Where the family name may be ambiguous (e.g., a double name), please indicate this clearly. Present the authors' affiliation addresses (where the actual work was done) below the names. Indicate all affiliations with a lower-case superscript letter immediately after the author's name and in front of the appropriate address. Provide the full postal address of each affiliation, including the country name, and, if available, the e-mail address of each author.
• Corresponding author. Clearly indicate who will handle correspondence at all stages of refereeing and publication, also post-publication. Ensure that telephone and fax numbers (with country and area code) are provided in addition to the e-mail address and the complete postal address.
• Present/permanent address. If an author has moved since the work described in the article was done, or was visiting at the time, a "Present address" (or "Permanent address") may be indicated as a footnote to that author's name. The address at which the author actually did the work must be retained as the main, affiliation address. Superscript Arabic numerals are used for such footnotes.
Abstract
A self-contained abstract of 100 to 200 words, outlining in a single paragraph the aims, scope and conclusions of the paper must be supplied. Do not list the analytical equipment (e.g. SEM, XRD, TEM) used unless it is critical to the meaning. The abstract should state briefly the purpose of the research, the principal results and major conclusions. An abstract is often presented separate from the article, so it must be able to stand alone. For this reason, References should be avoided, but if essential, they must be cited in full, without reference to the reference list. Also, non-standard or uncommon abbreviations should be avoided, but if essential they must be defined at their first mention in the abstract itself.
Graphical abstract
A Graphical abstract is optional and should summarize the contents of the paper in a concise, pictorial form designed to capture the attention of a wide readership online. Authors must provide images that clearly represent the work described in the paper. Graphical abstracts should be submitted as a separate file in the online submission system. Maximum image size: 400 × 600 pixels (h × w, recommended size 200 × 500 pixels). Preferred file types: TIFF, EPS, PDF or MS Office files. See http://www.elsevier.com/graphicalabstracts for examples.
Research highlights
Research highlights are a short collection of bullet points that convey the core findings of the article. Research highlights are optional and should be submitted in a separate file in the online submission system. Please use 'Research highlights' in the file name and include 3 to 5 bullet points (maximum 85 characters per bullet point including spaces). See http://www.elsevier.com/researchhighlights for examples.
Keywords
Immediately after the abstract, provide a maximum of 6 keywords, using American spelling and avoiding general and plural terms and multiple concepts (avoid, for example, "and", "of"). Be sparing with abbreviations: only abbreviations firmly established in the field may be eligible. These keywords will be used for indexing purposes.
Acknowledgements
Collate acknowledgements in a separate section at the end of the article before the references and do not, therefore, include them on the title page, as a footnote to the title or otherwise. List here those individuals who provided help during the research (e.g., providing language help, writing assistance or proof reading the article, etc.).
Nomenclature and units
Follow internationally accepted rules and conventions: use the international system of units (SI). If other quantities are mentioned, give their equivalent in SI. You are urged to consult IUGS: Nomenclature for geological time scales/rock names: http://www.iugs.org/ for further information.
Math formulae
Present simple formulae in the line of normal text where possible and use the solidus (/) instead of a horizontal line for small fractional terms, e.g., X/Y. In principle, variables are to be presented in italics. Powers of e are often more conveniently denoted by exp. Number consecutively any equations that have to be displayed separately from the text (if referred to explicitly in the text).
Artwork
Electronic artwork
General points
• Make sure you use uniform lettering and sizing of your original artwork.
• Save text in illustrations as "graphics" or enclose the font.
• Only use the following fonts in your illustrations: Arial, Courier, Times, Symbol.
• Number the illustrations according to their sequence in the text.
• Use a logical naming convention for your artwork files.
• Provide captions to illustrations separately.
• Produce images near to the desired size of the printed version.
• Submit each figure as a separate file.
A detailed guide on electronic artwork is available on our website:
http://www.elsevier.com/artworkinstructions
You are urged to visit this site; some excerpts from the detailed information are given here.
Formats
Regardless of the application used, when your electronic artwork is finalised, please "save as" or convert the images to one of the following formats (note the resolution requirements for line drawings, halftones, and line/halftone combinations given below):
EPS: Vector drawings. Embed the font or save the text as "graphics".
TIFF: color or grayscale photographs (halftones): always use a minimum of 300 dpi.
TIFF: Bitmapped line drawings: use a minimum of 1000 dpi.
TIFF: Combinations bitmapped line/half-tone (color or grayscale): a minimum of 500 dpi is required.
DOC, XLS or PPT: If your electronic artwork is created in any of these Microsoft Office applications please supply "as is".
Please do not:
• Supply embedded graphics in your wordprocessor (spreadsheet, presentation) document;
• Supply files that are optimised for screen use (like GIF, BMP, PICT, WPG); the resolution is too low;
• Supply files that are too low in resolution;
• Submit graphics that are disproportionately large for the content.
Color artwork
Please make sure that artwork files are in an acceptable format (TIFF, EPS or MS Office files) and with the correct resolution. If, together with your accepted article, you submit usable color figures then Elsevier will ensure, at no additional charge, that these figures will appear in color on the Web (e.g., ScienceDirect and other sites) regardless of whether or not these illustrations are reproduced in color in the printed version. For color reproduction in print, you will receive information regarding the costs from Elsevier after receipt of your accepted article. Please indicate your preference for color in print or on the Web only. For further information on the preparation of electronic artwork, please see http://www.elsevier.com/artworkinstructions.
Please note: Because of technical complications which can arise by converting color figures to "gray scale" (for the printed version should you not opt for color in print) please submit in addition usable black and white versions of all the color illustrations.
Figure captions
Ensure that each illustration has a caption. Supply captions separately, not attached to the figure. A caption should comprise a brief title (not on the figure itself) and a description of the illustration. Keep text in the illustrations themselves to a minimum but explain all symbols and abbreviations used.
Tables
Number tables consecutively in accordance with their appearance in the text. Place footnotes to tables below the table body and indicate them with superscript lowercase letters. Avoid vertical rules. Be sparing in the use of tables and ensure that the data presented in tables do not duplicate results described elsewhere in the article.
References
Citation in text
Please ensure that every reference cited in the text is also present in the reference list (and vice versa). Any references cited in the abstract must be given in full. Unpublished results and personal communications are not recommended in the reference list, but may be mentioned in the text. If these references are included in the reference list they should follow the standard reference style of the journal and should include a substitution of the publication date with either "Unpublished results" or "Personal communication" Citation of a reference as "in press" implies that the item has been accepted for publication.
Web references
As a minimum, the full URL should be given and the date when the reference was last accessed. Any further information, if known (DOI, author names, dates, reference to a source publication, etc.), should also be given. Web references can be listed separately (e.g., after the reference list) under a different heading if desired, or can be included in the reference list.
References in a special issue
Please ensure that the words 'this issue' are added to any references in the list (and any citations in the text) to other articles in the same Special Issue.
Reference management software
This journal has standard templates available in key reference management packages EndNote ( http://www.endnote.com) and Reference Manager ( http://www.refman.com). Using plug-ins to wordprocessing packages, authors only need to select the appropriate journal template when preparing their article and the list of references and citations to these will be formatted according to the journal style which is described below.
Reference style
Text: Indicate references by number(s) in square brackets in line with the text. The actual authors can be referred to, but the reference number(s) must always be given.
List: Number the references (numbers in square brackets) in the list in the order in which they appear in the text.
Examples:
Reference to a journal publication:
[1] Van der Geer J, Hanraads JAJ, Lupton RA. The art of writing a scientific article. J Sci Commun 2000;163:51–9.
Reference to a book:
[2] Strunk Jr W, White EB. The elements of style. 3rd ed. New York: Macmillan; 1979.
Reference to a chapter in an edited book:
[3] Mettam GR, Adams LB. How to prepare an electronic version of your article. In: Jones BS, Smith RZ, editors. Introduction to the electronic age, New York: E-Publishing Inc; 1999, p. 281–304.
Note shortened form for last page number. e.g., 51–9, and that for more than 6 authors the first 6 should be listed followed by "et al." For further details you are referred to "Uniform Requirements for Manuscripts submitted to Biomedical Journals" (J Am Med Assoc 1997;277:927–934) (see also http://www.nlm.nih.gov/bsd/uniform_requirements.html).
Journal abbreviations source
Journal names should be abbreviated according to
Index Medicus journal abbreviations: http://www.nlm.nih.gov/tsd/serials/lji.html;
List of serial title word abbreviations: http://www.issn.org/2-22661-LTWA-online.php;
CAS (Chemical Abstracts Service): http://www.cas.org/sent.html.
Video data
Elsevier accepts video material and animation sequences to support and enhance your scientific research. Authors who have video or animation files that they wish to submit with their article are strongly encouraged to include these within the body of the article. This can be done in the same way as a figure or table by referring to the video or animation content and noting in the body text where it should be placed. All submitted files should be properly labeled so that they directly relate to the video file's content. In order to ensure that your video or animation material is directly usable, please provide the files in one of our recommended file formats with a maximum size of 10 MB. Video and animation files supplied will be published online in the electronic version of your article in Elsevier Web products, including ScienceDirect: http://www.sciencedirect.com. Please supply 'stills' with your files: you can choose any frame from the video or animation or make a separate image. These will be used instead of standard icons and will personalize the link to your video data. For more detailed instructions please visit our video instruction pages at http://www.elsevier.com/artworkinstructions. Note: since video and animation cannot be embedded in the print version of the journal, please provide text for both the electronic and the print version for the portions of the article that refer to this content.
Supplementary data
Figures and text submitted as supplementary material must contain only material that is supportive of the main text, and not material that is inherent to the essential meaning of the article. Papers with reference to supplementary material, which the Editors find necessary to include as main text, will be sent back to authors.
Elsevier accepts electronic supplementary material to support and enhance your scientific research. Supplementary files offer the author additional possibilities to publish supporting applications, high-resolution images, background datasets, sound clips and more. Supplementary files supplied will be published online alongside the electronic version of your article in Elsevier Web products, including ScienceDirect: http://www.sciencedirect.com. In order to ensure that your submitted material is directly usable, please provide the data in one of our recommended file formats. Authors should submit the material in electronic format together with the article and supply a concise and descriptive caption for each file. For more detailed instructions please visit our artwork instruction pages at http://www.elsevier.com/artworkinstructions.
Submission checklist
It is hoped that this list will be useful during the final checking of an article prior to sending it to the journal's Editor for review. Please consult this Guide for Authors for further details of any item.
Ensure that the following items are present:
One Author designated as corresponding Author:
• E-mail address
• Full postal address
• Telephone and fax numbers
All necessary files have been uploaded
• Keywords
• All figure captions
• All tables (including title, description, footnotes)
Further considerations
• Manuscript has been "spellchecked" and "grammar-checked"
• References are in the correct format for this journal
• All references mentioned in the Reference list are cited in the text, and vice versa
• Permission has been obtained for use of copyrighted material from other sources (including the Web)
• Color figures are clearly marked as being intended for color reproduction on the Web (free of charge) and in print or to be reproduced in color on the Web (free of charge) and in black-and-white in print
• If only color on the Web is required, black and white versions of the figures are also supplied for printing purposes
For any further information please visit our customer support site at http://epsupport.elsevier.com.
Use of the Digital Object Identifier
The Digital Object Identifier (DOI) may be used to cite and link to electronic documents. The DOI consists of a unique alpha-numeric character string which is assigned to a document by the publisher upon the initial electronic publication. The assigned DOI never changes. Therefore, it is an ideal medium for citing a document, particularly 'Articles in press' because they have not yet received their full bibliographic information. The correct format for citing a DOI is shown as follows (example taken from a document in the journal Physics Letters B):
doi:10.1016/j.physletb.2003.10.071
When you use the DOI to create URL hyperlinks to documents on the web, they are guaranteed never to change.
Proofs
One set of page proofs (as PDF files) will be sent by e-mail to the corresponding author (if we do not have an e-mail address then paper proofs will be sent by post) or, a link will be provided in the e-mail so that authors can download the files themselves. Elsevier now provides authors with PDF proofs which can be annotated; for this you will need to download Adobe Reader version 7 (or higher) available free from http://www.adobe.com/products/acrobat/readstep2.html. Instructions on how to annotate PDF files will accompany the proofs (also given online). The exact system requirements are given at the Adobe site: http://www.adobe.com/products/acrobat/acrrsystemreqs.html#70win.
If you do not wish to use the PDF annotations function, you may list the corrections (including replies to the Query Form) and return them to Elsevier in an e-mail. Please list your corrections quoting line number. If, for any reason, this is not possible, then mark the corrections and any other comments (including replies to the Query Form) on a printout of your proof and return by fax, or scan the pages and e-mail, or by post. Please use this proof only for checking the typesetting, editing, completeness and correctness of the text, tables and figures. Significant changes to the article as accepted for publication will only be considered at this stage with permission from the Editor. We will do everything possible to get your article published quickly and accurately. Therefore, it is important to ensure that all of your corrections are sent back to us in one communication: please check carefully before replying, as inclusion of any subsequent corrections cannot be guaranteed. Proofreading is solely your responsibility. Note that Elsevier may proceed with the publication of your article if no response is received.
Offprints
The corresponding author, at no cost, will be provided with a PDF file of the article via e-mail. For an extra charge, paper offprints can be ordered via the offprint order form which is sent once the article is accepted for publication. The PDF file is a watermarked version of the published article and includes a cover sheet with the journal cover image and a disclaimer outlining the terms and conditions of use.
Keyword List
Adhesion
Aerospace materials
Atomic force microscopy
Ceramics
Characterization methods
Chemical vapour Deposition
Composite materials
Crystal Growth
Crystal structure
Defects
Deformation and fracture
Deposition
Dielectrics
Diffusion
Elastic Properties
Electrical Properties
Electronic Materials
Electroceramics
Electron microscopy
Epitaxial growth
Fatigue
Ferroelectrics
Fibre technology
Fullerenes
Grain Boundaries
Grain Boundary Junctions
Hardness
Ion beam technology
Intermetallic alloys and compounds
Kinetics
Langmuir-Blodgett films
Laser processing
Luminescence
Magnetic materials
Martensitic transformation
Mechanical properties
Metals and alloys
Metallurgy
Microstructure
Mossbauer Spectroscopy
Multilayer structure
Nanocomposites
Nanomaterials
Optical materials and properties
Perovskites
Phase diagrams
Phosphors
Photochemical technology
Piezoelectric materials
Polymers
Porosity
Positron Annihilation
Powder technology
Scanning tunnelling microscopy
Semiconductors
Sensors
Shape memory materials
Sintering
Sol-gel preparation
Solar energy materials
Solidification
Superconductors
Surfaces
Thermal properties
Thin films
Thick films
Transport mechanisms
Varistors
Viscoelasticity
X-ray techniques
For inquiries relating to the submission of articles (including electronic submission where available) please visit this journal's homepage. You can track accepted articles at http://www.elsevier.com/trackarticle and set up e-mail alerts to inform you of when an article's status has changed. Also accessible from here is information on copyright, frequently asked questions and more. Contact details for questions arising after acceptance of an article, especially those relating to proofs, will be provided by the publisher.
Editorial Board
Editor-in-Chief
A.R. Boccaccini
(Biomaterials, glasses and ceramics, materials processing, porous materials, biocomposites, mechanical properties)
Institute of Biomaterials, Department of Materials Science & Engineering, University of Erlangen-Nuremberg, Cauerstr. 6, 91058 Erlangen, Germany, Email: aldo.boccaccini@ww.uni-erlangen.de
Editors:
J. Hojo
(Nanocomposites, Composites, Sol-gel preparation)
Department of Applied Chemistry, Kyushu University, 744 Motooka, Nishi-ku, Fukuoka, 819-0395 JAPAN, Email: mlett@cstf.kyushu-u.ac.jp
T.G. Nieh
(Metallic Alloys, Ceramics, Composites, High Temperature Materials, Mechanical Behavior, Material Processing)
University of Tennessee, Dept. of Materials Science and Engineering, Room 422 Dougherty Engineering Building, TN 37996-2200, Knoxville, Tennessee, USA, Email: tnieh@utk.edu
L.S. Shvindlerman
(Nano-Crystalline Metals, Thermodynamics, Kinetics, Interfaces and Surfaces)
Institut fur Metallkunde und Metallphysik RWTH Aachen, Kopernikusstr. 14, D-52056 Aachen, Germany
A.F.W. Willoughby
(Semiconductor/Electronic Materials, Polymers)
Engineering Materials, Eustice Building, The University of Southampton, SO17 1BJ, UK, Email: gsr@soton.ac.uk
Associate Editorial Board:
A. Bellosi
Faenza, Italy
A. Brinkman
Durham, UK
M. Cinibulk
Dayton, OH, USA
P. Colombo
Padova, Italy
W.G. Fahrenholtz
Rolla, MO, USA
H. Gleiter
Karlsruhe, Germany
T. Goto
Tohoku, Japan
D. Greenspan
Alachua, FL, USA
A. Hozumi
Nagoya, Japan
V.V. Kharton
Aveiro, Portugal
J.A. Kilner
London, UK
M. Lanagan
University Park, PA, USA
S.T. Lee
Hong Kong, China
Z.G. Liu
Nanjing, China
T. Lopez
Mexico DF, Mexico
X.L. Ma
Shenyang, China
E. Manias
University Park, PA, USA
L. Qiao
Beijing, China
P. Reed
Southampton, UK
Y. Sakka
Ibaraki, Japan
M. Sayer
Kingston, Canada
T. Siegrist
Lund, Sweden
N. Stolwijk
Münster, Germany
M. Stuke
Göttingen, Germany
Y. Sugahara
Tokyo, Japan
R. Triboulet
Meudon, France
W.B. White
University Park, PA, USA
X. Yao
Shanghai, China
D.Y. Yoon
Taejon, Korea
Y.F. Zheng
Beijing, China
J. Zhu
Beijing, China
Founding Editor:
F.F.Y. Wang
Editor Emeritus:
J.H. Wernick
|
