期刊名称：MATERIALS RESEARCH BULLETIN
 期刊简介(About the journal)
投稿须知(Instructions to Authors)
编辑部信息(Editorial Board)
About the journal
Materials Research Bulletin
|
The Materials Research Bulletin is an international rapid publication journal reporting research on the synthesis, processing, structure and properties of materials. It deals with materials which have interesting electronic, magnetic, optical, mechanical or catalytic properties. Relationships between synthesis, structure and properties are discussed. Topics covered include new materials, high temperature and high pressure phase transitions, crystal growth, defect structure analysis, ceramics, intermetallics, non-crystalline solids, polymers and composites.
|
 |
Audience
Materials Scientists, Ceramists, Chemists
Abstracting / Indexing
- Cambridge Scientific Abstracts
- Chemical Abstracts
- Current Contents/Engineering, Computing and Technology
- Energy Data Base
- Energy Research Abstracts
- Engineering Index
- IBZ
|
- INSPEC
- ISMEC
- Materials Science Citation Index
- PASCAL/CNRS
- Research Alert
- Scisearch
- Solid State Abstracts
|
Instructions to Authors
Materials Research Bulletin is an international rapid publication journal reporting research on the synthesis, processing, structure and properties of inorganic materials with interesting electronic, magnetic, optical, mechanical and catalytic properties. Metals, alloys, coordination complexes and polymers do not fall within the scope of the journal. Relationship between synthesis, structure and properties should be discussed. Topics covered include new inorganic materials (oxides, chalcogenides, nitrides), ceramics, crystal growth, crystal structure analysis, high temperature and high pressure phase transitions, defect structure analysis, phosphors, non-crystalline solids, novel nanomaterials and composites.
Ethics in Publishing
For information on Ethics in Publishing and Ethical guidelines for journal publication see  http://www.elsevier.com/publishingethics and http://www.elsevier.com/ethicalguidelines.
Conflict of interest
All authors are requested to disclose any actual or potential conflict of interest including any financial, personal or other relationships with other people or organizations within three years of beginning the submitted work that could inappropriately influence, or be perceived to influence, their work. See also http://www.elsevier.com/conflictsofinterest.
Submission declaration
Submission of an article implies that the work described has not been published previously (except in the form of an abstract or as part of a published lecture or academic thesis), that it is not under consideration for publication elsewhere, that its publication is approved by all authors and tacitly or explicitly by the responsible authorities where the work was carried out, and that, if accepted, it will not be published elsewhere including electronically in the same form, in English or in any other language, without the written consent of the copyright-holder.
Copyright
Upon acceptance of an article, authors will be asked to complete a 'Journal Publishing Agreement' (for more information on this and copyright see http://www.elsevier.com/copyright). Acceptance of the agreement will ensure the widest possible dissemination of information. An e-mail will be sent to the corresponding author confirming receipt of the manuscript together with a 'Journal Publishing Agreement' form or a link to the online version of this agreement.
Subscribers may reproduce tables of contents or prepare lists of articles including abstracts for internal circulation within their institutions. Permission of the Publisher is required for resale or distribution outside the institution and for all other derivative works, including compilations and translations (please consult http://www.elsevier.com/permissions). If excerpts from other copyrighted works are included, the author(s) must obtain written permission from the copyright owners and credit the source(s) in the article. Elsevier has preprinted forms for use by authors in these cases: please consult http://www.elsevier.com/permissions.
Retained author rights
As an author you (or your employer or institution) retain certain rights; for details you are referred to: http://www.elsevier.com/authorsrights.
Role of the funding source
You are requested to identify who provided financial support for the conduct of the research and/or preparation of the article and to briefly describe the role of the sponsor(s), if any, in study design; in the collection, analysis and interpretation of data; in the writing of the report; and in the decision to submit the paper for publication. If the funding source(s) had no such involvement then this should be stated. Please see http://www.elsevier.com/funding.
Funding body agreements and policies
Elsevier has established agreements and developed policies to allow authors whose articles appear in journals published by Elsevier, to comply with potential manuscript archiving requirements as specified as conditions of their grant awards. To learn more about existing agreements and policies please visit http://www.elsevier.com/fundingbodies.
Language and language services
Please write your text in good English (American or British usage is accepted, but not a mixture of these). Authors who require information about language editing and copyediting services pre- and post-submission please visit http://www.elsevier.com/languageediting or our customer support site at http://epsupport.elsevier.com for more information.
Submission
Submission to this journal proceeds totally online and you will be guided stepwise through the creation and uploading of your files. The system automatically converts source files to a single PDF file of the article, which is used in the peer-review process. Please note that even though manuscript source files are converted to PDF files at submission for the review process, these source files are needed for further processing after acceptance. All correspondence, including notification of the Editor's decision and requests for revision, takes place by e-mail removing the need for a paper trail.
Submit your article
Please submit your article via http://www.ees.elsevier.com/mrb
Referees
Please submit, with the manuscript, the names, addresses and e-mail addresses of 3 potential referees. Note that the editor retains the sole right to decide whether or not the suggested reviewers are used.
Use of wordprocessing software
It is important that the file be saved in the native format of the wordprocessor used. The text should be in single-column format. Keep the layout of the text as simple as possible. Most formatting codes will be removed and replaced on processing the article. In particular, do not use the wordprocessor's options to justify text or to hyphenate words. However, do use bold face, italics, subscripts, superscripts etc. Do not embed "graphically designed" equations or tables, but prepare these using the wordprocessor's facility. When preparing tables, if you are using a table grid, use only one grid for each individual table and not a grid for each row. If no grid is used, use tabs, not spaces, to align columns. The electronic text should be prepared in a way very similar to that of conventional manuscripts (see also the Guide to Publishing with Elsevier: http://www.elsevier.com/guidepublication). Do not import the figures into the text file but, instead, indicate their approximate locations directly in the electronic text and on the manuscript. See also the section on Electronic illustrations.
To avoid unnecessary errors you are strongly advised to use the "spell-check" and "grammar-check" functions of your wordprocessor.
LaTeX
If the LaTeX file is suitable, proofs will be produced without rekeying the text. The article should preferably be written using Elsevier's document class "elsarticle", or alternatively any of the other recognized classes and formats supported in Elsevier's electronic submissions system, for further information see http://www.elsevier.com/wps/find/authorsview.authors/latex-ees-supported.
The Elsevier "elsarticle" LaTeX style file package (including detailed instructions for LaTeX preparation) can be obtained from the Quickguide: http://www.elsevier.com/latex or from the Comprehensive TeX Archive Network (CTAN): see below, in the directory /tex-archive/macros/latex/contrib/elsarticle. It consists of the files: elsarticle.cls, complete user documentation for the class file, bibliographic style files in various styles, and template files for a quick start.guidelines for users of elsart, a template file for quick start.
CTAN is an archive with up-to-date copies of all the public-domain versions of TeX, LaTeX, Metafont and ancillary programs, which is made available via a mirrored network of FTP servers. You can enter the CTAN archive via a web interface in the UK ( http://www.tex.ac.uk), in the USA http://www.ctan.org), or in Germany ( http://www.dante.de/software/ctan) (page in German). You can search for a package on CTAN via http://www.ucc.ie/cgi-bin/ctan/. You can also enter the archive via FTP at ftp://ftp.tex.ac.uk, at ftp://ftp.dante.de, at ftp://ctan.tug.org, or at one of the many mirror servers; see for a list the UK or USA CTAN web pages. When a CTAN server does not respond, please try another one.
Note that CTAN is not related to Elsevier, and that Elsevier's Customer support cannot accept complaints or answer questions about the availability of any CTAN server.
Figures may be inserted in the usual way using an \includegraphics command, at the position in the article where they are cited.
Your LaTeX file will be most useful as input for the printed article if you obey the following rules of thumb:
1. Be consistent. If you use a macro for a phrase, use it throughout.
2. Use standard LaTeX mark-up. Do not hardcode your own layout for e.g. section headings, but use the usual LaTeX macro for this purpose.
3. Keep it simple. Do not define macros that accomplish complicated layout. They will also make the input process complicated.
Article structure
Subdivision - numbered sections
Divide your article into clearly defined and numbered sections. Subsections should be numbered 1.1 (then 1.1.1, 1.1.2, ...), 1.2, etc. (the abstract is not included in section numbering). Use this numbering also for internal cross-referencing: do not just refer to "the text". Any subsection may be given a brief heading. Each heading should appear on its own separate line.
Introduction
State the objectives of the work and provide an adequate background, avoiding a detailed literature survey or a summary of the results.
Material and methods
Provide sufficient detail to allow the work to be reproduced. Methods already published should be indicated by a reference: only relevant modifications should be described.
Experimental
Provide sufficient detail to allow the work to be reproduced. Methods already published should be indicated by a reference: only relevant modifications should be described.
Theory/calculation
A Theory section should extend, not repeat, the background to the article already dealt with in the Introduction and lay the foundation for further work. In contrast, a Calculation section represents a practical development from a theoretical basis.
Results
Results should be clear and concise.
Specific, numerical, quantitative results are best.
Discussion
This should explore the significance of the results of the work, not repeat them. A combined Results and Discussion section is often appropriate. Avoid extensive citations and discussion of published literature.
Conclusions
The main conclusions of the study may be presented in a short Conclusions section, which may stand alone or form a subsection of a Discussion or Results and Discussion section.
The "Conclusion" section of scientific papers should not be the same as the Abstract. The major results should be summarized; quantitative, numerical data and unique findings emphasized, but with broader implications than in the Abstract, and comparisons with previous results can be made.
Appendices
If there is more than one appendix, they should be identified as A, B, etc. Formulae and equations in appendices should be given separate numbering: Eq. (A.1), Eq. (A.2), etc.; in a subsequent appendix, Eq. (B.1) and so on.
Essential title page information
• Title. Concise and informative. Titles are often used in information-retrieval systems. Avoid abbreviations and formulae where possible.
• Author names and affiliations. Where the family name may be ambiguous (e.g., a double name), please indicate this clearly. Present the authors' affiliation addresses (where the actual work was done) below the names. Indicate all affiliations with a lower-case superscript letter immediately after the author's name and in front of the appropriate address. Provide the full postal address of each affiliation, including the country name, and, if available, the e-mail address of each author.
• Corresponding author. Clearly indicate who will handle correspondence at all stages of refereeing and publication, also post-publication. Ensure that telephone and fax numbers (with country and area code) are provided in addition to the e-mail address and the complete postal address.
• Present/permanent address. If an author has moved since the work described in the article was done, or was visiting at the time, a "Present address" (or "Permanent address") may be indicated as a footnote to that author's name. The address at which the author actually did the work must be retained as the main, affiliation address. Superscript Arabic numerals are used for such footnotes.
Abstract
A concise and factual abstract is required. The abstract should state briefly the purpose of the research, the principal results and major conclusions. An abstract is often presented separately from the article, so it must be able to stand alone. For this reason, References should be avoided, but if essential, then cite the author(s) and year(s). The Abstract should not exceed 150 words and no abbreviations are allowed in the abstract.
Keywords
Select a maximum of five keywords and list them in your paper two lines below the Abstract. This section should be labeled KEYWORDS and the capital letter denoting the category from which a keyword has been selected should precede the keyword, i.e., KEYWORDS: A. alloys, A. metals, C. X-ray diffraction. Only words on this list may be used.
A. TYPES OF MATERIAL
alloys
amorphous materials
carbides
ceramics
chalcogénides
composites
electronic materials
elements
fluorides
fullerenes
glasses
halides
hydrides
inorganic compounds
interfaces
intermetallic compounds
layered compounds
magnetic materials
metals
microporous materials
multilayers
nanostructures
nitrides
optical materials
organic compounds
organometallic compounds
oxides
polymers
quasicrystals
semiconductors
surfaces
superconductors
structural materials
thin films
B. PREPARATION AND PROCESSING
chemical synthesis
crystal growth
epitaxial growth
intercalation reactions
laser annealing
laser deposition
plasma deposition
sol-gel chemistry
sputtering
vapor deposition
C. TECHNIQUES
atomic force microscopy
differential scanning calorimetry (DSC)
electrochemical measurements
electron diffraction
electron energy loss spectroscopy (EELS)
electron microscopy
high pressure
impedance spectroscopy
infrared spectroscopy
Mössbauer spectroscopy
neutron scattering
nuclear quadrupole resonance (NQR)
nuclear magnetic resonance (NMR)
photoelectron spectroscopy
positron annihilation spectroscopy
Raman spectroscopy
scanning tunneling microscopy (STM)
thermogravimetric analysis (TGA)
ultrasonic measurements
XAFS (EXAFS and XANES)
X-ray diffraction
D. PROPERTIES AND PHENOMENA
acoustical properties
catalytic properties
charge-density waves
color centers
crystal structure
defects
dielectric properties
diffusion
elastic properties
electrical properties
electrochemical properties
electronic paramagnetic resonance (EPR)
electronic structure
energy storage
equations-of-state
Fermi surface
ferroelectricity
fracture
ionic conductivity
lattice dynamics
luminescence
magnetic properties
magnetic structure
mechanical properties
microstructure
optical properties
phase equilibria
phase transactions
piezoelectricity
radiation damage
semiconductivity
specific heat
spin-density waves
superconductivity
surface properties
thermal conductivity
thermal expansion
Abbreviations
Define abbreviations that are not standard in this field in a footnote to be placed on the first page of the article. Ensure consistency of abbreviations throughout the article.
Acknowledgements
Collate acknowledgements in a separate section at the end of the article before the references and do not, therefore, include them on the title page, as a footnote to the title or otherwise. List here those individuals who provided help during the research (e.g., providing language help, writing assistance or proof reading the article, etc.).
Units
Follow internationally accepted rules and conventions: use the international system of units (SI). If other units are mentioned, please give their equivalent in SI.
Nomenclature and units
Follow internationally accepted rules and conventions: use the international system of units (SI). If other quantities are mentioned, give their equivalent in SI. You are urged to consult IUPAP: Symbols, Units, Nomenclature and Fundamental Constants in Physics: http://www.iupap.org/ for further information.
Math formulae
Present simple formulae in the line of normal text where possible and use the solidus (/) instead of a horizontal line for small fractional terms, e.g., X/Y. In principle, variables are to be presented in italics. Powers of e are often more conveniently denoted by exp. Number consecutively any equations that have to be displayed separately from the text (if referred to explicitly in the text).
Footnotes
Footnotes should be used sparingly. Number them consecutively throughout the article, using superscript Arabic numbers. Many wordprocessors build footnotes into the text, and this feature may be used. Should this not be the case, indicate the position of footnotes in the text and present the footnotes themselves separately at the end of the article. Do not include footnotes in the Reference list.
Table footnotes
Indicate each footnote in a table with a superscript lowercase letter.
Artwork
Image manipulation
Whilst it is accepted that authors sometimes need to manipulate images for clarity, manipulation for purposes of deception or fraud will be seen as scientific ethical abuse and will be dealt with accordingly. For graphical images, this journal is applying the following policy: no specific feature within an image may be enhanced, obscured, moved, removed, or introduced. Adjustments of brightness, contrast, or color balance are acceptable if and as long as they do not obscure or eliminate any information present in the original. Nonlinear adjustments (e.g. changes to gamma settings) must be disclosed in the figure legend.
Electronic artwork
General points
• Make sure you use uniform lettering and sizing of your original artwork.
• Save text in illustrations as "graphics" or enclose the font.
• Only use the following fonts in your illustrations: Arial, Courier, Times, Symbol.
• Number the illustrations according to their sequence in the text.
• Use a logical naming convention for your artwork files.
• Provide captions to illustrations separately.
• Produce images near to the desired size of the printed version.
• Submit each figure as a separate file.
A detailed guide on electronic artwork is available on our website:
http://www.elsevier.com/artworkinstructions
You are urged to visit this site; some excerpts from the detailed information are given here.
Formats
Regardless of the application used, when your electronic artwork is finalised, please "save as" or convert the images to one of the following formats (note the resolution requirements for line drawings, halftones, and line/halftone combinations given below):
EPS: Vector drawings. Embed the font or save the text as "graphics".
TIFF: color or grayscale photographs (halftones): always use a minimum of 300 dpi.
TIFF: Bitmapped line drawings: use a minimum of 1000 dpi.
TIFF: Combinations bitmapped line/half-tone (color or grayscale): a minimum of 500 dpi is required.
DOC, XLS or PPT: If your electronic artwork is created in any of these Microsoft Office applications please supply "as is".
Please do not:
• Supply embedded graphics in your wordprocessor (spreadsheet, presentation) document;
• Supply files that are optimised for screen use (like GIF, BMP, PICT, WPG); the resolution is too low;
• Supply files that are too low in resolution;
• Submit graphics that are disproportionately large for the content.
Color artwork
Please make sure that artwork files are in an acceptable format (TIFF, EPS or MS Office files) and with the correct resolution. If, together with your accepted article, you submit usable color figures then Elsevier will ensure, at no additional charge, that these figures will appear in color on the Web (e.g., ScienceDirect and other sites) regardless of whether or not these illustrations are reproduced in color in the printed version. For color reproduction in print, you will receive information regarding the costs from Elsevier after receipt of your accepted article. Please indicate your preference for color in print or on the Web only. For further information on the preparation of electronic artwork, please see http://www.elsevier.com/artworkinstructions.
Please note: Because of technical complications which can arise by converting color figures to "gray scale" (for the printed version should you not opt for color in print) please submit in addition usable black and white versions of all the color illustrations.
Figure captions
Ensure that each illustration has a caption. Supply captions separately, not attached to the figure. A caption should comprise a brief title (not on the figure itself) and a description of the illustration. Keep text in the illustrations themselves to a minimum but explain all symbols and abbreviations used.
Text graphics
Present incidental graphics not suitable for mention as figures, plates or schemes at the end of the article and number them "Graphic 1", etc. Their precise position in the text can then be indicated. See further under Electronic artwork. Ensure that high-resolution graphics files are provided, even if the graphic appears as part of your normal wordprocessed text file.
Tables
Number tables consecutively in accordance with their appearance in the text. Place footnotes to tables below the table body and indicate them with superscript lowercase letters. Avoid vertical rules. Be sparing in the use of tables and ensure that the data presented in tables do not duplicate results described elsewhere in the article.
Please provide tables on separate pages from the text. Type table captions flush left, one line above the table. Use tabs, not spaces, to align data in columns, and lines should be used sparingly.
References
Citation in text
Please ensure that every reference cited in the text is also present in the reference list (and vice versa). Any references cited in the abstract must be given in full. Unpublished results and personal communications are not recommended in the reference list, but may be mentioned in the text. If these references are included in the reference list they should follow the standard reference style of the journal and should include a substitution of the publication date with either "Unpublished results" or "Personal communication" Citation of a reference as "in press" implies that the item has been accepted for publication.
Web references
As a minimum, the full URL should be given and the date when the reference was last accessed. Any further information, if known (DOI, author names, dates, reference to a source publication, etc.), should also be given. Web references can be listed separately (e.g., after the reference list) under a different heading if desired, or can be included in the reference list.
Reference to arXiv
As with unpublished results and personal communications, references to arXiv documents are not recommended in the reference list. Please make every effort to obtain the full reference of the published version of an arXiv document. If a reference to an arXiv document must be included in the references list it should follow the standard reference style of the journal and should include a substitution of the volume and page numbers with 'arXiv:YYMM.NNNN' or 'arXiv:arch-ive/YYMMNNN' for papers submitted to arXiv before April 2007.
References in a special issue
Please ensure that the words 'this issue' are added to any references in the list (and any citations in the text) to other articles in the same Special Issue.
Reference management software
This journal has standard templates available in key reference management packages EndNote ( http://www.endnote.com) and Reference Manager ( http://www.refman.com). Using plug-ins to wordprocessing packages, authors only need to select the appropriate journal template when preparing their article and the list of references and citations to these will be formatted according to the journal style which is described below.
Reference style
Text: Indicate references by number(s) in square brackets in line with the text. The actual authors can be referred to, but the reference number(s) must always be given.
Example: "..... as demonstrated [3,6]. Barnaby and Jones [8] obtained a different result ...."
List: Number the references (numbers in square brackets) in the list in the order in which they appear in the text.
Examples:
Reference to a journal publication:
[1] J. van der Geer, J.A.J. Hanraads, R.A. Lupton, J. Sci. Commun. 163 (2000) 51–59.
Reference to a book:
[2] W. Strunk Jr., E.B. White, The Elements of Style, third ed., Macmillan, New York, 1979.
Reference to a chapter in an edited book:
[3] G.R. Mettam, L.B. Adams, in: B.S. Jones, R.Z. Smith (Eds.), Introduction to the Electronic Age, E-Publishing, Inc. New York, 1994, pp. 281–304.
Journal abbreviations source
Journal names should be abbreviated according to
Index Medicus journal abbreviations: http://www.nlm.nih.gov/tsd/serials/lji.html;
List of serial title word abbreviations: http://www.issn.org/2-22661-LTWA-online.php;
CAS (Chemical Abstracts Service): http://www.cas.org/sent.html.
Video data
Elsevier accepts video material and animation sequences to support and enhance your scientific research. Authors who have video or animation files that they wish to submit with their article are strongly encouraged to include these within the body of the article. This can be done in the same way as a figure or table by referring to the video or animation content and noting in the body text where it should be placed. All submitted files should be properly labeled so that they directly relate to the video file's content. In order to ensure that your video or animation material is directly usable, please provide the files in one of our recommended file formats with a maximum size of 10 MB. Video and animation files supplied will be published online in the electronic version of your article in Elsevier Web products, including ScienceDirect: http://www.sciencedirect.com. Please supply 'stills' with your files: you can choose any frame from the video or animation or make a separate image. These will be used instead of standard icons and will personalize the link to your video data. For more detailed instructions please visit our video instruction pages at http://www.elsevier.com/artworkinstructions. Note: since video and animation cannot be embedded in the print version of the journal, please provide text for both the electronic and the print version for the portions of the article that refer to this content.
Supplementary data
Elsevier accepts electronic supplementary material to support and enhance your scientific research. Supplementary files offer the author additional possibilities to publish supporting applications, high-resolution images, background datasets, sound clips and more. Supplementary files supplied will be published online alongside the electronic version of your article in Elsevier Web products, including ScienceDirect: http://www.sciencedirect.com. In order to ensure that your submitted material is directly usable, please provide the data in one of our recommended file formats. Authors should submit the material in electronic format together with the article and supply a concise and descriptive caption for each file. For more detailed instructions please visit our artwork instruction pages at http://www.elsevier.com/artworkinstructions.
Submission checklist
It is hoped that this list will be useful during the final checking of an article prior to sending it to the journal's Editor for review. Please consult this Guide for Authors for further details of any item.
Ensure that the following items are present:
One Author designated as corresponding Author:
• E-mail address
• Full postal address
• Telephone and fax numbers
All necessary files have been uploaded
• Keywords
• All figure captions
• All tables (including title, description, footnotes)
Further considerations
• Manuscript has been "spellchecked" and "grammar-checked"
• References are in the correct format for this journal
• All references mentioned in the Reference list are cited in the text, and vice versa
• Permission has been obtained for use of copyrighted material from other sources (including the Web)
• Color figures are clearly marked as being intended for color reproduction on the Web (free of charge) and in print or to be reproduced in color on the Web (free of charge) and in black-and-white in print
• If only color on the Web is required, black and white versions of the figures are also supplied for printing purposes
For any further information please visit our customer support site at http://epsupport.elsevier.com.
Use of the Digital Object Identifier
The Digital Object Identifier (DOI) may be used to cite and link to electronic documents. The DOI consists of a unique alpha-numeric character string which is assigned to a document by the publisher upon the initial electronic publication. The assigned DOI never changes. Therefore, it is an ideal medium for citing a document, particularly 'Articles in press' because they have not yet received their full bibliographic information. The correct format for citing a DOI is shown as follows (example taken from a document in the journal Physics Letters B):
doi:10.1016/j.physletb.2003.10.071
When you use the DOI to create URL hyperlinks to documents on the web, they are guaranteed never to change.
Proofs
One set of page proofs (as PDF files) will be sent by e-mail to the corresponding author (if we do not have an e-mail address then paper proofs will be sent by post) or, a link will be provided in the e-mail so that authors can download the files themselves. Elsevier now provides authors with PDF proofs which can be annotated; for this you will need to download Adobe Reader version 7 (or higher) available free from http://www.adobe.com/products/acrobat/readstep2.html. Instructions on how to annotate PDF files will accompany the proofs (also given online). The exact system requirements are given at the Adobe site: http://www.adobe.com/products/acrobat/acrrsystemreqs.html#70win.
If you do not wish to use the PDF annotations function, you may list the corrections (including replies to the Query Form) and return them to Elsevier in an e-mail. Please list your corrections quoting line number. If, for any reason, this is not possible, then mark the corrections and any other comments (including replies to the Query Form) on a printout of your proof and return by fax, or scan the pages and e-mail, or by post. Please use this proof only for checking the typesetting, editing, completeness and correctness of the text, tables and figures. Significant changes to the article as accepted for publication will only be considered at this stage with permission from the Editor. We will do everything possible to get your article published quickly and accurately. Therefore, it is important to ensure that all of your corrections are sent back to us in one communication: please check carefully before replying, as inclusion of any subsequent corrections cannot be guaranteed. Proofreading is solely your responsibility. Note that Elsevier may proceed with the publication of your article if no response is received.
Offprints
The corresponding author, at no cost, will be provided with a PDF file of the article via e-mail. For an extra charge, paper offprints can be ordered via the offprint order form which is sent once the article is accepted for publication. The PDF file is a watermarked version of the published article and includes a cover sheet with the journal cover image and a disclaimer outlining the terms and conditions of use.
For inquiries relating to the submission of articles (including electronic submission where available) please visit this journal's homepage. You can track accepted articles at http://www.elsevier.com/trackarticle and set up e-mail alerts to inform you of when an article's status has changed. Also accessible from here is information on copyright, frequently asked questions and more. Contact details for questions arising after acceptance of an article, especially those relating to proofs, will be provided by the publisher.
Editorial Board
Editor-in-Chief:
Professor M. Greenblatt
Dept. of Chemistry, Wright-Rieman Laboratory, Rutgers University, 610 Taylor Road, Piscataway, 08854-8087, USA, Fax: +1 732 445 5312, Tel: +1 732 878 2159, Email: mrb@rutchem.rutgers.edu
Editor:
Professor C.-H. Yan
Chemistry & Applications Dept., State Key Laboratory of Rare Earth Materials, Beijing, China, Fax: +86 10 62754179, Tel: +86 10 62754179, Email: yan@pku.edu.cn
Associate Editors:
Miguel A. Alario-Franco
Fac. de Ciencias Geologicas, Laboratorio de Quimica del Estado Solido, Universidad Complutense de Madrid, Cuidad Universitaria s/n, 28040 Madrid, Spain, Fax: +34 913 944 352, Tel: +34 91 394 4338, Email: maaf@eucmax.sim.ucm.es
Evgeny Antipov
Dept. of Chemistry, Div. of Inorganic Chemistry, Moscow State University, 119899 Moscow, Russian Federation, Tel: +7 095 939 3375, Email: antipov@icr.chem.msu.ru
R.J. Cava
Dept. of Chemistry, 121 Frick Laboratory, Princeton University, Washington Road and William Street, Princeton, 08544-1009, USA, Fax: +1 609 2586746, Tel: +1 609 2583900, Email: rcava@chemvax.princeton.edu
Helmut Eckert
Inst. für Physikalische Chemie, Westfälische Wilhelms-Universität Münster, Corrensstrasse 28-30, D-48149 Munster, Germany, Fax: +49-251-8329159, Tel: +49-251-8329161, Email: eckerth@uni-muenster.de
T.J. Emge
Dept. Chem & Chemical Biology, Rutgers University, Wright-Rieman Labs, 610 Taylor Road, Piscataway, NJ 08854-8087, USA, Fax: + 732 445 5312, Tel: + 732 445 5959, Email: emge@rutchem.rutgers.edu
Shouhua Feng
Dept. of Chemistry, Jilin University, Qianwei Road. 10#, 130012 Changchun, Jilin Province, China, Email: dekuan@mail.jlu.edu.cn
J.B. Goodenough
Ctr. Mats Science & Eng, University of Texas, ETC 5.160, Austin, TX 78712, USA, Fax: +1512 471 7681, Tel: +1 512 471 1646, Email: jgoodenough@mail.utexas.edu
J. Gopalakrishnan
Solid State & Structural Chemistry Unit, Indian Institute of Science, Sir C.V. Raman Avenue, 560 012 Bangalore, India, Fax: +91 80 2360 1310, Tel: +91 80 2293 2537, Email: gopal@sscu.iisc.ernet.in
P. Shiv Halasyamani
Dept. of Chemistry, 136 Fleming Bldg., University of Houston, Houston, TX 77204, USA, Fax: 713-743-0796, Tel: 713-743-3278, Email: PSH@UH.EDU
A.J. Jacobson
Dept. of Chemistry, 136 Fleming Bldg., University of Houston, Houston, TX 77204, USA, Fax: 713 743 2787, Tel: 713 743 2785, Email: ajjacob@uh.edu
Richard Kaner
Dept. of Chemistry and Biochemistry, University of California at Los Angeles (UCLA), 607 Charles E. Young Drive East, Box 951569, Los Angeles, CA 90095-1569, USA, Fax: +1-310-206-4038, Tel: +1-310-825-5346, Email: kaner@chem.ucla.edu
J. Lucas
Lab. Des Verres et Ceramiques, Université de Rennes I, Ave Du General LeClerc, Campus De Baeuliue, 35042 Rennes Cedex, France, Fax: +33 2 99281600, Tel: +33 2 9928 6260, Email: jacques.lucas@univ-rennes1.fr
William H. McCarroll
Dept. Chemistry & Biochemistry, Rider University, 2083 Lawrenceville Road, Lawrenceville, NJ 08648-3099, USA, Fax: +1 609 895-5782, Tel: +1 609 895-5667
C.N.R. Rao
Ctr. of Excellence in Chemistry, Chem. and Phys. of Materials Unit, Jawaharlal Nehru Centre for Advanced Scientific Research, Jakkur P.O., 560 064 Bangalore, India, Fax: +91-80 22082760, Tel: +91-80 23653075, Email: cnrrao@jncasr.ac.in
B. Raveau
Inst. Cristallographie, ISMRA, boulevard Marechal Juin, 14050 Caen, France, Fax: +33 231 951 600, Tel: +33 231 452 616, Email: bernard.raveau@ismra.fr
A.W. Sleight
Dept. of Chemistry, Oregon State University, 153 Gilbert Hall, Corvallis, OR 97331-4003, USA, Fax: 001 541737 4407, Tel: 001 541737 4406, Email: sleighta@ccmail.orst.edu
Mas Subramanian
Dept. of Chemistry, Oregon State University, 153 Gilbert Hall, Corvallis, OR 97331-4003, USA, Fax: (541) 737-2062, Tel: (541) 737-8235, Email: mas.subramanian@oregonstate.edu
R. Tenne
Dept. of Materials and Interfaces, Weizmann Institute of Science, 76100 Rehovot, Israel, Email: reshef.tenne@weizmann.ac.il
Rick Ubic
Dept. of Materials Science and Engineering, Boise State University, 1910 University Drive, Boise, ID 83725, USA, Email: rickubic@boisestate.edu
G. van Tendeloo
Dept. of Mathematics and Computer Science, RUCA, Universiteit Antwerpen, Groenenborgerlaan 171, A-2020 Antwerpen, Belgium, Fax: +32 3 2180 217, Tel: +32 3 2180 262, Email: gvt@ruca.ua.ac.be
Dwight Viehland
Dept. Materials Science & Engineering, Virginia Polytechnic Institute and State University, 203 Holden Hall, (0237), BLACKSBURG, 24060-0237, USA, Fax: +540 231 8919, Tel: +540 231 2276, Email: viehland@mse.vt.edu
R. West
Dept. of Engineering Materials, University of Sheffield, Sir Robert Hadfield Building, Mappin Street, Sheffield, S1 3JD, UK, Fax: +44 114 222 5943, Tel: +44 114 222 5501, Email: a.r.west@sheffield.ac.uk
M. Whangbo
Dept. of Chemistry, North Carolina State University, Raleigh, NC 27695-8204, USA, Tel: +1 919 515 3464, Email: Mike_Whangbo@ncsu.edu
Shu-Hong Yu
Div. of Nanomaterials and Chemistry, University of Science & Technology of China, Hefei, 230026 Anhui, China, Email: shyu@ustc.edu.cn
|
