期刊名称：JOURNAL OF ORGANOMETALLIC CHEMISTRY
 期刊简介(About the journal)
投稿须知(Instructions to Authors)
编辑部信息(Editorial Board)
About the journal
|
The Journal of Organometallic Chemistry has a long-standing tradition for publishing original papers dealing with theoretical aspects, structural chemistry, synthesis, physical and chemical properties including reaction mechanisms, and practical applications of organometallic compounds.
Because of the growing importance of organometallic complexes in bioorganometallic chemistry and material sciences, on one hand, and of heavier main group elements in organometallic chemistry, on the other hand, the scope of the Journal has been enlarged, and work covering these fields is also considered.
Besides original papers, the Journal of Organometallic Chemistry publishes review articles communications and notes.
Supplementary Data Archive
|
 |
Instructions to Authors
Authors are encouraged to submit their papers (including graphical abstract!) electronically directly to the appropriate Regional Editor by using online manuscript submission http://www.elsubmit.com/esubmit/jom.
Authors interested in online submission are requested to go to the website and upload their manuscript and its associated artwork. An electronic (PDF) proof is generated and the reviewing process is carried out using that PDF. It is important that all graphical and tabular elements be placed within the text, so that the PDF is suitable for reviewing. This will also allow the preferred position of placement to be indicated, however please note that due to journal conventions, it may not be possible to meet all requirements for placement of artwork. Moreover, the PDF file may be edited after acceptance to follow journal standards. Authors and editors send and receive all correspondence by email via the website and no paper correspondence is performed.
The Journal of Organometallic Chemistry has a long-standing tradition for publishing original papers dealing with theoretical aspects, structural chemistry, synthesis, physical and chemical properties including reaction mechanisms, and practical applications of organometallic compounds. Because of the growing importance of organometallic complexes in bioorganometallic chemistry and material sciences, on one hand, and of heavier main group elements in organometallic chemistry, on the other hand, the scope of the Journal has been enlarged, and work covering these fields is also considered. Besides original papers, the Journal of Organometallic Chemistry publishes review articles, communications and notes.
Abstracting services
Chemical Abstracts, Chemischer Informationsdienst, Current Abstracts of Chemistry and Index Chemicus, Current Contents, PASCAL (C.D.S.T.), Research AlertTM, Science Citation Index.
Types of contributions
- Original papers not previously published
- Communications
- Notes
- Subject reviews
- Book reviews
Submission of contributions
Authors should submit four copies of their manuscripts, including graphical abstract, and one complete set of original illustrations and two copies to one of the Regional Editors. For the final version in addition to the original and three copies, authors should submit an electronic version of their manuscript on disk. Subject Reviews are published upon invitation by the Subject Reviews Editors.
Regional Editors
Dr. Richard D. Adams
Regional Editor, JOMC
Dept. of Chemistry & Biochemistry
University of South Carolina
Columbia, SC 29208
USA
Fax: +1 (803) 777 6781
E-mail: Adams@mail.chem.sc.edu
Professor W.A. Herrmann
Technische Universitaet Muenchen
Anorganische-chemisches Institut
Lichtenbergstrasse 4
D-85747 Garching
Germany
Fax: +49 (89) 3209 3473
E-mail: Herrmann.JOM@ch.tum.de
Dr Guy Bertrand
Universit¨¦ Paul Sabatier
H¨¦t¨¦rochimie Fondamentale et Appliqu¨¦e
118 route de Narbonne
31026 Toulouse Cedex 04
France
Fax: ++33 561 55 8204
E-mail: gbertran@chimie.ups-tlse.fr
Professor D.M.P. Mingos
St Edmund Hall
Oxford OX1 4AR
UK
Fax: +44 (1865) 279 030
E-mail: michael.mingos@st-edmund-hall.oxford.ac.uk
Professor K. Tatsumi
Research Centre for Materials Science
Nagoya University
Furo-cho, Chikusa-ku
Nagoya 464-8602, Japan
Fax: +81-774-38-3186
E-mail:i45100a@nucc.cc.nagoya-u.ac.jp
Subject Review Editor
Professor G. van Koten
Utrecht University
Dept. of Metal-Mediated Synthesis
Transitorium 3, Padualaan 8
NL-3584 CH Utrecht
The Netherlands
Fax: +31 (30) 52 3615
Book Reviews Editor
Professor J.G. Leigh
University of Sussex
School of Molecular Sciences
Brighton BN1 9QJ
UK
Fax: +44 (273) 677196
Contributions are accepted on the understanding that the authors have obtained the necessary authority for publication. Submission of an article must be accompanied by a statement that the article is original and unpublished and is not being considered for publication elsewhere. Upon acceptance of an article by the Journal, the author(s) will be asked to transfer the copyright of the article to the publisher. This transfer will ensure the widest possible dissemination of information.
Authors are reminded that delays in publication may occur if the instructions for submission and disk and manuscript preparation are not strictly followed. Authors are strongly recommended to submit disks to aid rapid processing. To facilitate communication, authors are requested to provide their current e-mail address, phone and fax number.
There are no page charges
Preparation of manuscripts on disk
MainText
Articles prepared using any of the more popular word-processing packages are acceptable but please note the following points.
- Submissions should be made on a double-density or high-density 3.5" disk.
- The disk format, word-processor format, file name(s) and the title and authors of the article must be indicated on the disk.
- The disk must always be accompanied by a hard-copy version of the article, and the content of the two must be identical.
- The disk text must be the same as that of the final refereed, revised manuscript.
- Disks formatted for either IBM PC compatibles or Apple Macintosh are preferred. If you can provide either of these, our preference is for the former.
- The article must be saved in the native format of the word processor used, e.g. WordPerfect, Microsoft Word, etc.
- Although most popular word processor file formats are acceptable, we cannot guarantee the usability of all formats. If the disk you send us proves to be unusable, we will publish your article from the hard copy.
- Please do not send ASCII files as relevant data may be lost.
- There is no need to spend time formatting your article so that the printout is visually attractive (e.g. by making headings bold or creating a page layout with figures), as most formatting instructions will be removed upon processing.
- Leave a blank line between each paragraph and between each entry in the list of bibliographic references.
- Tables should preferably be placed in the same electronic file as the text. Authors should consult a recent issue of the Journal for table layout.
Graphics
General - Information on creating graphics can be found at: http://www.elsevier.nl/homepage/sab/artwork
Although there are still a large number of technical difficulties to overcome, we are processing graphic files in a growing number of cases. Both scanned and computer-generated illustrations, either in colour or black and white are acceptable.
Requirements: The following requirements are to be met:
Hard copy in all cases. Since we cannot a priori guarantee the usability of your graphic file(s), hard copies of all illustrations should accompany the accepted printout of the manuscript in all cases. One set should be in a publishable condition.
Disks: Files should preferably be submitted on disk, either IBM or Macintosh. Submission via e-mail is not recommended for large files.
Format: TIFF or EPS files are preferred. TIFF files should preferably be compressed, but only LZW (Macintosh) compression is acceptable. Please note that corrections in EPS figures are only possible if they have been prepared with Adobe Illustrator 3.0 or higher versions. The usability of other formats is to a large extent dependent on the information you supply us with concerning the soft - and hardware used. It is a good idea to put the relevant information in the header of the file.
Resolution: Drawings made with Adobe Illustrator and Aldus Freehand (Macintosh) and CorelDraw (IBM/DOS) generally give good results. Drawings made in WordPerfect or Word generally have a too low resolution; only if made at a much higher resolution (1016 dpi) can they be used. Files of scanned line drawings are acceptable if done at a minimum of 1016 dpi. For scanned halftone figures a resolution of 300 dpi is sufficient. Scanned figures compressed with JPEG usually give no problems. Please note that scanned figures cannot be enlarged, only reduced.
Guidelines for Crystallographic Data
1. Policy. The Journal will accept for publication papers containing or comprising the results of crystal structure determinations which will be of interest to organometallic, inorganic or organic chemists. Papers reporting only crystallographic results must relate to work of novelty or special significance to inorganic and organometallic chemistry which must be emphasised.
2. Submission of Papers. The following procedures should be followed:
a) Prior to the submission of the manuscript, the author(s) should deposit with the relevant Data Centre the data corresponding to each structure to be reported in the intended publication. Data for metal organic structures, i.e. those which contain organic carbon in any of the species present in the structure, (including metal carbonyls) should be sent to the Cambridge Crystallographic Data Centre (CCDC) by e-mail (address: deposit@ccdc.cam.ac.uk) preferably in CIF format. A checklist of data items to be included in the deposition can be obtained from the CCDC Home Page on the Worldwide Web (http://www.ccdc.cam.ac.uk/) or by e-mail (to fileserv@ccdc.cam.ac.uk) with the one line message sendme checklist.
Data for inorganic compounds should be sent to Fachinformationszentium Karlsruhe (FIZ) by e-mail (address: crysdata@FIZ-Karlsruhe.de), by FTP (please contact FIZ if you choose this option) or on disk. No hard copy submissions will be accepted.
The Data Centres will provide, within a day or two of submission, deposition codes for each data set, which should be quoted in suitable form in the manuscript submitted to the Journal. The deposited data will be accessed by the Journal and checked as part of the refereeing process.
Add to publication: "Crystallographic data for the structural analysis has been deposited with the Cambridge Crystallographic Data Centre, CCDC No. xxxxxx for compound X.
Copies of this information may be obtained free of charge from:
The Director
CCDC
12 Union Road
Cambridge, CB2 1EZ UK
Fax. (int code) +44(1223)336-033
or
Email: deposit@ccdc.cam.ac.uk or www:http://www.ccdc.cam.ac.uk
b) When the paper is submitted to the Journal, the following guidelines should be adhered to:
- The Title should contain reference to the presence in the paper of X-ray crystallographic results.
- The Abstract should not contain crystal data, but should include a concise statement of the main features of the structural results.
- The Experimental results must be presented in a concise format.
In general, authors should not include a detailed text description of data collection, crystal structure solution and refinement, if these followed standard procedures and no difficulties were met. Reference to a previous paper containing a more detailed experimental description can be given if relevant. However, if any parts of the structure analysis were unusual, and affected the presentation and/or accuracy of the results, then these should be discussed. The following crystallographic data should be given, all contained in a paragraph (if one structure reported) or Table (two or more structures).
i) Colour, habit and size of crystals used, and behaviour of the compound under ambient conditions if not mentioned elsewhere in the paper.
ii) Chemical Formula.
This should correspond to the complete chemical unit encompassing crystallographic symmetry (e.g. a centrosymmetric dimer should be included in full form). The use of fractional coefficients (e.g. 0.5H2O) should be used only if the unit has partial occupancy of its site. Formulae should be presented in a way that molecules, ionic fragments, solvate molecules etc. are separately identified.
iii) Unit cell parameters with esd s and X-ray wavelength used.
iv) Crystal system, space group and number of complete chemical units (see ii) per cell.
v) Type of diffractometer used and method of data collection; total number of data collected, excluding any intensity controls, number unique Rint value (if relevant, number observed (with cut-off parameter) and completeness of data to suitable 2theta or sin-theta/lambda limit; use or otherwise of absorption correction.
vi) Final results. Give values of R, Rw (and their definitions) and number of parameters. Indicate form of refinement (F or F2) and treatment of hydrogen atoms.
Note that easily derived parameters (F(000), density etc.) should not be given unless required in discussion of other data (e.g. number of solvent molecules, etc).
Discussion of the Structure. This must include a clear, labelled diagram of the structure (molecule, complex ion or unit cell contents if the structure is polymeric) and a list of relevant geometry parameters - interatomic distances, interbond angles, torsion angles etc. with error estimates. Data for geometrically less important parts of the structure, such as ligand sub groups (phenyl rings, alkyl groups etc) should not be given, unless these are the subject of particular discussion. Packing diagrams of crystal structures of molecular compounds should not be given unless there are chemically important intermolecular interactions.
3. Supplementary Material.
If deposition numbers are provided at the time of submission, it is not necessary to submit copies of the Supplementary Material with the manuscript if the above procedures have been followed. However, authors are recommended to submit with the manuscript, as supplementary sheets, not for publication, any further information which they feel may aid the refereeing process, particularly if any of the usual quality-of-structure indicators point to problems in the analysis.
Manuscript preparation
Language
Papers will be published in English. Authors' manuscripts must be consistent in style, spelling and syntax. Authors in Japan please note that information about how to have the English of your paper checked, corrected and improved (before submission) is available from:
Elsevier Science K.K.
1-9-15 Higashi Azabu
1-chome Building 4F
Minato-ku,Tokyo 106-0044
Japan
Tel: +81 (3) 5561-5032
Fax: +81(3) 5561-5045
E-mail: info@elsevier.co.jp
Estimation of length
For a rough estimate of the final length of their printed article, authors should count 850 words per full two-column page and four illustrations per page.
Keywords
A maximum of six keywords should be indicated below the abstract to describe the contents of the manuscript. Keywords should be selected, if appropriate, from the following classes: theoretical methods, experimental methods, phenomena, materials, and applications. A recommended list of current keywords used in the Journal are published regularly. This list may also be obtained from the Editor or publisher.
Graphical abstract
Please note that the contents lists of the Journal of Organometallic Chemistry contain Graphical Abstracts: pictograms and synopses. The authors are therefore asked to provide a drawing or reaction scheme (pictogram) illustrating their work and a synopsis of maximum 50 words. The pictogram should measure 55x50 mm for direct reproduction. If reduction is needed, please make sure that the illustration is still informative upon reduction.
Colour illustrations
Illustrations can be printed in colour when they are judged by the Editor to be essential to the presentation. Generally, the publisher and author will each bear part of the extra costs involved. The charge to be passed on to authors of articles containing colour figures is EUR 635.00 for the first page containing colour and EUR 318.00 for each additional page containing colour. Authors located in Europe or Japan will be billed in Euros, while authors located outside Europe or Japan will be billed in US dollars.
Short Communications
Short Communications submitted to the Journal of Organometallic Chemistry are important reports of unusual urgency or original advances in organometallic chemistry for which rapid publication is justified. The manuscript should be restricted to 2500 words or the equivalent space in illustrations and tables. An abstract and 4-6 keywords should be included.
Notes
The Journal of Organometallic Chemistry holds a section for short reports of completed investigations. These reports will be called Notes. They should not exceed 2500 words of text or 4 printed pages including schemes, figures and citations. Results and Discussion sections should be combined. Tables of atomic positional parameters for structural analysis will not be published, and only one structural diagram will be permitted. Otherwise, all criteria for the standard full report will apply to that of the Note.
Further information
All questions arising after acceptance of a paper, especially those concerning proofs, should be directed to:
Elsevier Science B.V.
Issue Management
Journal of Organometallic Chemistry
1000 CT Amsterdam
The Netherlands
e.mail: B.Nyaku@elsevier.nl
Other Enquiries
For enquiries relating to the status of accepted articles through our Online Article Status Information System (OASIS), author Frequently Asked Questions and any other enquiries relating to Elsevier Science, please contact http://www.elsevier.com/locate/authors
Proofs
Authors will receive proofs, which they are requested to correct and return as soon as possible. No new material may be inserted in the text at the time of proof-reading. A Note added in proof must be dated and the author must have requested and received the Editor's approval.
Offprints
Twenty five offprints are supplied to authors free of charge. Additional offprints may be ordered at prices shown on the offprint order form which will accompany the proofs. This order form should be returned promptly since the price of offprints ordered afterpublication is substantially higher.
Editorial Board
-
- Regional Editors:
- R.D. Adams, Dept of Chemistry & Biochemistry, University of South Carolina,Columbia, SC 29208,USA Fax: +1 (803) 777 6781, Email: Adams@mail.chem.sc.edu
G. Bertrand, Universit?Paul Sabatier, Hétérochimie Fondamentale et Appliquée, 118, Route de Narbonne, 31062 Toulouse, Cedex 04, France Email: gbertran@chimie.ups-tlse.fr
W.A. Herrmann, Technische Universität München, Institut für Anorganische Chemie, Lichtenbergstrasse 4, D-85747 Garching, Germany Email: Herrmann.JOM@ch.tum.de
D.M.P. Mingos FRS, The Principal's Lodgings, St Edmund Hall, Queens Lane, Oxford OX1 4AR, UK Email: michael.mingos@st-edmund-hall.oxford.ac.uk
K. Tatsumi, Research Centre for Materials Science, Nagoya University, Furo-cho, Chikusa-ku, Nagoya 464-8602, Japan Email: i45100a@nucc.cc.nagoya-u.ac.jp
- Subject Reviews Editor:
- G. van Koten, Utrecht University, Dept. of Metal-Mediated Synthesis, Padualaan 8, Utrecht CH 3584, NL
- Book Reviews Editor:
- G.J. Leigh, The School of Chemistry and Molecular Sciences, University of Sussex, Falmer, Brighton BN1 9QJ, UK
- Editorial Board:
- D.A. Atwood, Lexington, KY, USA
I.P. Beletskaya, Moscow, Russia
M. Beller, Rostock, Germany
T. Bitterwolf, Moscow, ID, USA
M. Bochmann, Norfolk, UK
U.H.F Bunz, Columbia, SC, USA
M. Chaudret, Toulouse, France
J.-T. Chen, Taipei, Taiwan
R.J.P. Corriu, Montpellier, France
F.A. Cotton, College Station, USA
A.H. Cowley, Austin, TX, USA
Y. Do, Daejeon, Korea
G. Erker, Muenster, Germany
W.J. Evans, Irvine, CA, USA
R.A. Fischer, Bochum, Germany
M.L.H. Green, Oxford, UK
M.G. Humphrey, Canberra, Australia
G. Jaouen, Paris, France
R.F. Jordan, Chicago, IL, USA
H. Kurosawa, Osaka, Japan
M.F. Lappert, Brighton, UK
T.-Y. Luh, Taipei, Taiwan
T.B. Marder, Durham, UK
F. Mathey, Palaiseau Cedex, France
K. Matsumoto, Tokyo, Japan
B. Meunier, Toulouse, France
E. Nakamura, Tokyo, Japan
J. Okuda, Aachen, Germany
G.F. Parkin, New York, USA
P.P. Power, Davis, CA, USA
C. Raston, University of Leeds, Leeds, UK
G. Süss-Fink, Neuchátel, Switzerland
K. Tamao, Kyoto, Japan
M. Tanaka, Yokohama, Japan
T.D. Tilley, Berkeley, CA, USA
- Emeritus Honorary Board:
- H.C. Brown, Lafayette, IN, USA
F. Calderazzo, Pisa, Italy
G.P Chiusoli, Parma, Italy
A.G. Davies, London, UK
C. Eaborn, Brighton, Sussex, UK
E.O. Fischer, Garching, Germany
R.B. King, Athens, Georgia, USA
M. Kumada, Osaka-fu, Japan
H. Kurosawa, Osaka, Japan
P.M. Maitlis, Sheffield, UK
A. Nakamura, Osaka, Japan
J.F. Normant, Paris, France
P.L. Pauson, Glasgow, Scotland
M.D. Rausch, Amherst, MA, USA
H. Sakurai, Chiba, Japan
F.G.A. Stone, Waco, TX , USA
M.G. Voronkov, Irkutsk, Russia
H. Werner, Institut für Anorganische Chemie der Universität Würzburg
G. Wilke, Mülheim/Ruhr, Germany
|
