期刊名称：TOURISM MANAGEMENT
 期刊简介(About the journal)
投稿须知(Instructions to Authors)
编辑部信息(Editorial Board)
About the journal
Tourism Management is the leading international journal for all those concerned with the planning and management of travel and tourism.
Tourism comprises a multitude of activities which together form one of the world's fastest growing international sectors. The journal takes an interdisciplinary approach and includes planning and policy aspects of international, national and regional tourism as well as specific management studies.
The journal's contents reflect its integrative approach - including primary research articles, discussion of current issues, case studies, reports, book reviews and listings of recent publications, and forthcoming meetings. Articles are relevant to both academics and practitioners, and are the results of anonymous reviews by at least two referees chosen by the editor for their specialist knowledge.
Instructions to Authors
Tourism Management is an international journal which publishes original research in tourism, analysis of current trends, and information on the planning and management of all aspects of travel and tourism.
The journal emphasizes the broadness and interrelatedness of the tourism industry. Articles, which should take a multisectoral approach, may cover geography, economics, transportation, hotels and catering, sociology, marketing or development studies.
Tourism Management aims to publish articles that are directly relevant to its readers and of interest to both academics and practitioners, with a minimum of technical jargon. Subjects covered should be treated in such a way as to appeal to as wide a range as possible, and those reporting research should attempt to draw management implications from their results. The use of examples is encouraged.
Submission of Papers
From 1st October 2005, all manuscripts should be submitted electronically through the Elsevier Editorial System (EES) which can be accessed at http://ees.elsevier.com/jtma. The system will automatically convert your source files (which should preferably be in an editable format such as word) to a single Adobe Acrobat PDF version of the article, which will be used during the peer-review process. Please note that even though manuscript source files are converted to PDF at submission for the review process, these source files will be needed for further processing after acceptance. If you are not able to submit your paper to JTMA electronically please contact the Editor Chris Ryan at caryan@waikato.ac.nz for further instructions.
Submission of an article implies that the work described has not been published previously (except in the form of an abstract or as part of a published lecture or academic thesis), that it is not under consideration for publication elsewhere, that its publication is approved by all authors and tacitly or explicitly by the responsible authorities where the work was carried out, and that, if accepted, it will not be published elsewhere in the same form, in English or in any other language, without the written consent of the Publisher. The Editors reserve the right to edit or otherwise alter all contributions, but authors will receive proofs for approval before publication.
Upon acceptance of an article, authors will be asked to transfer copyright (for more information on copyright see http://authors.elsevier.com). This transfer will ensure the widest possible dissemination of information. A letter will be sent to the corresponding author confirming receipt of the manuscript. A form facilitating transfer of copyright will be provided. If excerpts from other copyrighted works are included, the author(s) must obtain written permission from the copyright owners and credit the source(s) in the article. Elsevier has preprinted forms for use by authors in these cases: contact ES Global Rights Department, P.O. Box 800, Oxford, OX5 1DX, UK; phone: (+44) 1865 843830, fax: (+44) 1865 853333, e-mail:permissions@elsevier.com
Preparation of text
Please write your text in good English (American or British usage is accepted, but not a mixture of these). Italics are not to be used for expressions of Latin origin, for example, in vivo, et al., per se. Use decimal points (not commas); use a space for thousands (10 000 and above).
Double spacing and wide (3 cm) margins should be used. (Avoid full justification, i.e., do not use a constant right-hand margin.) Ensure that each new paragraph is clearly indicated.
Provide the following data on the title page (in the order given).
Title. Concise and informative. Titles are often used in information-retrieval systems. Avoid abbreviations and formulae where possible.
Author names and affiliations. Where the family name may be ambiguous (e.g., a double name), please indicate this clearly. Present the authors' affiliation addresses (where the actual work was done) below the names. Indicate all affiliations with a lower-case superscript letter immediately after the author's name and in front of the appropriate address. Provide the full postal address of each affiliation, including the country name, and, if available, the e-mail address of each author.
Corresponding author. Clearly indicate who is willing to handle correspondence at all stages of refereeing and publication, also post-publication. Ensure that telephone and fax numbers (with country and area code) are provided in addition to the e-mail address and the complete postal address.
Present/permanent address. If an author has moved since the work described in the article was done, or was visiting at the time, a 'Present address' (or 'Permanent address') may be indicated as a footnote to that author's name. The address at which the author actually did the work must be retained as the main, affiliation address. Superscript Arabic numerals are used for such footnotes.
Abstract. A concise and factual abstract is required (maximum length 150 words). The abstract should state briefly the purpose of the research, the principal results and major conclusions. An abstract is often presented separate from the article, so it must be able to stand alone. References should therefore be avoided, but if essential, they must be cited in full, without reference to the reference list.
Keywords. Immediately after the abstract, provide a maximum of 8 keywords, avoiding general and plural terms and multiple concepts (avoid, for example, 'and', 'of'). Be sparing with abbreviations: only abbreviations firmly established in the field may be eligible.
Arrangement of the article
Subdivision of the article. Divide your article into clearly defined and numbered sections. Subsections should be numbered 1.1 (then 1.1.1, 1.1.2), 1.2, etc. (the abstract is not included in section numbering). Use this numbering also for internal cross-referencing: do not just refer to 'the text.' Any subsection, ideally, should not be more than 600 words. Authors are urged to write as concisely as possible, but not at the expense of clarity.
Figure legends, figures, schemes. Present these, in this order, at the end of the article. They are described in more detail below. High-resolution graphics files must always be provided separate from the main text file (see Preparation of illustrations). Tables. Number tables consecutively in accordance with their appearance in the text. Place footnotes to tables below the table body and indicate them with superscript lowercase letters. Avoid vertical rules. Be sparing in the use of tables and ensure that the data presented in tables do not duplicate results described elsewhere in the article.
References
Responsibility for the accuracy of bibliographic citations lies entirely with the authors.
Citations in the text: Please ensure that every reference cited in the text is also present in the reference list (and vice versa). Any references cited in the abstract must be given in full. Unpublished results and personal communications should not be in the reference list, but may be mentioned in the text. Citation of a reference as 'in press' implies that the item has been accepted for publication.
Citing and listing of web references: As a minimum, the full URL should be given. Any further information, if known (author names, dates, reference to a source publication, etc.), should also be given. Web references can be listed separately (e.g., after the reference list) under a different heading if desired, or can be included in the reference list.
Text: Citations in the text should follow the referencing style used by the American Psychological Association. You are referred to the Publication Manual of the American Psychological Association, Fifth Edition, ISBN 1-55798-790-4, copies of which may be ordered from http://www.apa.org/books/4200061.html or APA Order Dept., P.O.B. 2710, Hyattsville, MD 20784, USA or APA, 3 Henrietta Street, London, WC3E 8LU, UK. Details concerning this referencing style can also be found at http://humanities.byu.edu/linguistics/Henrichsen/APA/APA01.html.
List: References should be arranged first alphabetically and then further sorted chronologically if necessary. More than one reference from the same author(s) in the same year must be identified by the letters "a", "b", "c", etc., placed after the year of publication.
Examples:
Reference to a journal publication:
Van der Geer, J., Hanraads, J. A. J., & Lupton R. A. (2000). The art of writing a scientific article. Journal of Scientific Communications, 163, 51-59.
Reference to a book:
Strunk, W., Jr., & White, E. B. (1979). The elements of style. (3rd ed.). New York: Macmillan, (Chapter 4).
Reference to a chapter in an edited book:
Mettam, G. R., & Adams, L. B. (1994). How to prepare an electronic version of your article. In B. S. Jones, & R. Z. Smith (Eds.), Introduction to the electronic age (pp. 281-304). New York: E-Publishing Inc.
Preparation of Artwork
Number figures consecutively with Arabic numerals. Please visit our Web site at http://authors.elsevier.com/artwork, for detailed instructions on preparing electronic artwork.
When uploading your files, please do not use PDFs as source files for illustrations as these are large and slow down the journal site, which inconveniences users. Please use standard drawing programs for line figures (e.g., Adobe etc.). Please save all illustrations, including scanned photographs, micrographs and plates, in a simple file format such as Jpeg. The site will build all of your source files into a PDF. Please also remember to approve the PDF promptly.
Color figures in the printed issue can be accepted only if the authors defray the full cost. However, if together with your accepted article, you submit usable color figures, then Elsevier will ensure, at no additional charge, that these figures will appear in color on the Web (e.g., ScienceDirect and other sites) regardless of whether these illustrations are reproduced in color in the printed version.
For color reproduction in print, you will receive information regarding the costs from Elsevier after receipt of your accepted article. Please note: Because of technical complications that can arise in converting color figures to "gray scale" (for the printed version should you not opt for color in print), please submit in addition usable black-and-white files corresponding to all the color illustrations.
Captions. Ensure that each illustration has a caption. A caption should comprise a brief title (not on the figure itself) and a description of the illustration. Keep text in the illustrations themselves to a minimum but explain all symbols and abbreviations used.
Tables
Tables should be numbered consecutively with Arabic numerals in order of appearance in the text. Type each table double-spaced on a separate page with a short descriptive title typed directly above and with essential footnotes below.
Language editing
Information on author-paid and pre-accept language editing services available to authors can be found at http://authors.elsevier.com/LanguageEditing.html.
Proofs
When your manuscript is received by the Publisher it is considered to be in its final form. Proofs are not to be regarded as 'drafts'. One set of page proofs in PDF format will be sent by e-mail to the corresponding author, to be checked for typesetting/editing. No changes in, or additions to, the accepted (and subsequently edited) manuscript will be allowed at this stage. Proofreading is solely your responsibility. A form with queries from the copyeditor may accompany your proofs. Please answer all queries and make any corrections or additions required. Elsevier will do everything possible to get your article corrected and published as quickly and accurately as possible. In order to do this we need your help. When you receive the (PDF) proof of your article for correction, it is important to ensure that all of your corrections are sent back to us in one communication. Subsequent corrections will not be possible, so please ensure your first sending is complete. Note that this does not mean you have any less time to make your corrections, just that only one set of corrections will be accepted.
Online Publication
Your article will appear on Elsevier's online journal database ScienceDirect as an "Article in Press" within approximately 4-6 weeks of acceptance. Articles in Press for this journal can be viewed at http://www.sciencedirect.com/science/journal/0265931X. An Article in Press may be cited prior to its publication by means of its unique digital object identifier (DOI) number, which does not change throughout the publication process.
Enquiries
Authors can keep a track on the progress of their accepted article, and set up e-mail alerts informing them of changes to their manuscript's status, by using the "Track a Paper" feature of Elsevier's Author Gateway http://authors.elsevier.com. For privacy, information on each article is password-protected. The author should key in the "Our Reference" code (which is in the letter of acknowledgement sent by the publisher on receipt of the accepted article) and the name of the corresponding author. In case of problems or questions, authors may contact the Author Service Department, E-mail:authorsupport@elsevier.com.
Editorial Board
Editor:
Chris Ryan
Tourism Programme, Centre for Management Studies, The University of Waikato, Private Bag 3015, Hamilton, New Zealand, Tel: +64 (0)7 838 4259, Fax: +64 (0)7 838 4063, Email: caryan@waikato.ac.nz
Associate Editor:
Stephen Page
Scottish Enterprise Forth Valley Chair in Tourism, Department of Marketing, University of Stirling, Stirling FK9 4LA, UK, Tel: +44 (0)1786 466451, Fax: +44 (0)1786 464745, Email: s.j.page@stir.ac.uk
International Editorial Board:
D. Airey
University of Surrey, Guildford, UK
T. Baum
University of Strathclyde, Glasgow, UK
G. Crouch
La Trobe University, Victoria, Australia
D. Getz
University of Calgary, Canada
Zhang Guangrui
Chinese Academy of Social Sciences, Beijing, PRC
D. Harrison
University of North London, UK
K. Hollinshead
Luton Business School, University of Luton, UK
Sang Mu Kim
Keimyung University, Daegu, South Korea
R. Law
Hong Kong Polytechnic University, Kowloon, Hong Kong
A. Morrison
Purdue University, USA.
J.R.B. Ritchie
University of Calgary, Canada
D. Shafer
Pennsylvania State University, University Park PA, USA
P. Sheldon
School of Travel Industry Management, University of Hawaii, USA
S. Singh
Centre for Tourism Research and Development, Lucknow, India
S. Smith
University of Waterloo, Ontario, Canada
S. Wanhill
University of Bournemouth, Poole, UK
B. Weiler
Monash University, Berwick, Australia
|
