期刊名称：INTERNATIONAL JOURNAL OF HOSPITALITY MANAGEMENT
 期刊简介(About the journal)
投稿须知(Instructions to Authors)
编辑部信息(Editorial Board)
About the journal
Description
The International Journal of Hospitality Management discusses major trends and developments in a variety of disciplines as they apply to the hospitality industry. The range of topics covered by the journal includes:
•human resources management;
•consumer behaviour and marketing;
•business forecasting and applied economics;
•operational management;
•financial management;
•planning and design;
•information processing;
•education and training;
•technological developments;
•national and international legislation.
The journal also contains research papers, state-of-the-art reviews and analyses of business practice within the industry. It is also intended to include papers on the hospitality industry in different national contexts. In addition to the double-blind refereed papers and Research Notes, the journal publishes Discussion Papers, Letters to the Editor and Book Reviews.
Instructions to Authors
Guide for Authors
Submission of Papers
All manuscripts should be submitted electronically to Professor Abraham Pizam at apizam@mail.ucf.edu All main papers are refereed by the double-blind process. Only those receiving favourable recommendation from referees will be published at the discretion of the Editors.
Articles for the Discussion Paper or Viewpoint section should not exceed 3000 words and will be published at the discretion of the Editor-in-Chief. Research Notes should not exceed 2000 words (everything included) and will be published at the discretion of the Editor-in-Chief. Articles may be presented in a form intended to stimulate discussion through informed opinion. Such articles should be headed Viewpoint or Discussion Paper. Submission of an article implies that the work described has not been published previously (except in the form of an abstract or as part of a published lecture or academic thesis), that it is not under consideration for publication elsewhere, and that its publication is approved by all authors and tacitly or explicitly by the responsible authorities where the work was carried out, and that, if accepted, it will not be published elsewhere in the same form, in English or in any other language, without the written consent of the Publisher. It is essential to give a fax number and e-mail address when submitting a manuscript. Articles must be written in good English. Upon acceptance of an article, authors will be asked to transfer copyright (for more information on copyright see  http://www.elsevier.com/locate/authorrights.) This transfer will ensure the widest possible dissemination of information. A letter will be sent to the corresponding author confirming receipt of the manuscript. A form facilitating transfer of copyright will be provided. If excerpts from other copyrighted works are included, the author(s) must obtain written permission from the copyright owners and credit the source(s) in the article. Elsevier has preprinted forms for use by authors in these cases: contact Elsevier's Rights Department, Oxford, UK; phone: (+44) 1865 843830; fax: (+44) 1865 853333; email: permissions@elsevier.com Requests may also be completed online via the Elsevier homepage ( http://www.elsevier.com/locate/permissions.)
Manuscript Preparation
Presentation of Manuscript
General
Please write your text in good English (American or British usage is accepted, but not a mixture of these.) Italics are not to be used for expressions of Latin origin, for example, in vito, et al., per se. Use decimal points (not commas); use a space for thousands (10 000 and above). If possible, consult a recent issue of the journal to become familiar with layout and conventions. Number all pages consecutively. Authors should retain a copy of their manuscript since we cannot accept responsibility for damage or loss of papers. Provide the following data on the title page (in the order given).
Title. Concise and informative. Titles are often used in information-retrieved systems. Avoid abbreviations and formulae where possible.
Author names and affiliations. Where the family name may be ambiguous (e.g., a double name), please indicate this clearly. Present the author's affiliation addresses (where the actual work was done) below the names. Indicate all affiliations with a lower-case superscript letter immediately after the author's name and in front of the appropriate address. Provide the full postal address of each affiliation including the country name, and, if available, the e-mail address of each author.
Corresponding author. Clearly indicate who is willing to handle correspondence at all stages of refereeing and publication, also post-publication. Ensure the telephone and fax numbers (with country and area code) are provided in addition to the e-mail address and the complete postal address. Title, authors and affiliations should be supplied on a separate manuscript page to facilitate blind refereeing.
Present/permanent address. If an author has moved since the work described in the article was done, or was visiting at the time, a "Present address" ( or " Permanent address") may be indicated as a footnote to that author's name. The address at which the author actually did the work must be retained as the main, affiliation address. Superscript Arabic numerals are used for such footnotes.
Abstract. A consice and factual abstract is required (maximum length 100 words). The abstract should state briefly the purpose of the research, the principal results and major conclusions. An abstract is often presented separate from the article, so it must be able to stand alone. References should therefore be avoided, but if essential, they must be cited in full, without reference to the reference list. Non-standard or uncommon abbreviations should be avoided, but if essential they must be defined at their first mention in the abstract itself.
Keywords. Immediately after the abstract, provide a maximum of 6 keywords, using British spelling and avoiding general and plural terms and multiple concepts (avoid, for example, 'and', 'of'). Be sparing with abbreviations: only abbreviations firmly established in the field may be eligible. These keywords will be used for indexing purposes.
Arrangement of the article
Subdivision of the article. Divide your article into clearly defined and numbered sections. Subsections should be numbered 1.1 (then 1.1.1., 1.1.2.,...), 1.2., etc, (the abstract is not included in section numbering). Use this numbering also for internal cross-referencing : do not just refer to 'the text'. Any subsections may be given a brief heading. Each heading on its own separate line.
Introduction. State the objectives of the work and provide an adequate background, avoiding a detailed literature survey or a summary of the results.
Acknowledgements. Place acknowledgements, including information on grants received, before the references in a separate section, and not as a footnote on the title page.
References. See separate section, below.
Figure legends, tables, figures, schemes. Present these, in this order at the end of the article. They are described in more detail below. High-resolution graphic files must always be provided separate from the main text file (see Preparation of illustrations).
Tables. Number tables consecutively in accordance with their appearance in the text. Place footnotes to tables below the table body and indicate them with superscript lowercase letters. Avoid vertical rules. Be sparing in the use of tables and ensure that the data presented in tables do not duplicate results described elsewhere in the article.
Nomenclature and units. Follow internationally accepted rules and conventions: use the international system of units (SI). If other quantities are mentioned, give their equivalent in SI.
Paper Length. Manuscripts should normally not exceed 9000 words (everything included) of which no more than 1000 words should be in the Reference list.
References
Responsibility for the accuracy of bibliographic citations lies entirely with the authors.
Citations in the text. Please ensure that every reference cited in the text is also present in the reference list (and vice versa). Any references cited in the abstract must be given in full. Unpublished results and personal communications are not recommended in the refernce list, but may be mentioned in the text. If these references are included in the reference list they should follow the standard style of the journal and should include a substitution of the publication date with either "unpublished results" or "personal communication". Citation of a reference as 'in press' implies that the item has been accepted for publication.
Citing and listing of web references. As a minimum, the full URL should be given. Any further information, if known (author names, dates, reference to a source publication, etc.) should also be given. Web references can be listed separately (e.g., after the reference list) under a different heading if desired, or can be included in the reference list.
Text: All citations in the text should refer to:
1. Single author: the author's name (without initials, unless there is ambiguity) and the year of publication;
2. Two authors: both authors' names and the year of publication;
3. Three or more authors: first author's name followed by 'et al'. and the year of publication.
Citations may be made directly (or parenthetically). Groups of references should be listed first alphabetically, then chronologically.
Examples: "as demonstrated (Allan, 1996a, 1996b, 1999; Allan and Jones, 1995). Kramer et al. (2000) have recently shown...."
List. References should be arranged first alphabetically and then further sorted chronologically if necessary. More than one reference from the same author(s) in the same year must be identified by the letters "a", "b", "c", etc., placed after the year of publication.
Examples:
Reference to a journal publication:
Van der Geer, J., Hanraads, J.A.J., Lupton, R.A., 2000. The art of writing a scientific article. Journal of Scientific Communication. 163, 51-9.
Reference to a book:
Strunk Jr., W., White, E.B., 1979. The Elements of Style third ed. Macmillan, New York.
Reference to a chapter in an edited book:
Mettam, G.R., Adams, L.B., 1999. How to prepare an electronic version of your article, in: Jones, B.S., Smith, R.Z. (eds), Introduction to the Electronic Age. E-Publishing Inc., New York, pp.281-304.
Electronic format requirements for accepted articles
General points. We accept most word processing formats, but Word, WordPerfect or LaTeX is preferred. Always keep a backup copy of the electronic file for reference and safety. Save your files using the default extension of the program used.
Wordprocessor documents. It is important that the file be saved in the native format of the wordprocessor used. The text should be in single-column format. Keep the layout of the text as simple as possible. Most formatting codes will be removed and replaced on processing the article. In particular, do not use the wordprocessor's options to justify text or hyphenate words. However, do use bold face, italics, subscripts, superscripts, etc. Do not embed 'graphically designed' equations or tables, but prepare these using the wordprocessor's facility. When preparing tables, if you are using a table grid, use only one grid for each individual table and not a grid for each row. If no grid is used, use tabs, not spaces, to align columns. The electronic text should be prepared in a way very similar to that of conventional manuscripts (see also Elsevier s Guide to Publication at www.elsevier.com/locate/guidepublication). Do not import the figures into the text file but, instead, indicate their approximate locations directly in the electronic text and on the manuscript. See also the section on Preparation of electronic illustrations. To avoid unnecessary errors you are strongly advised to use the 'spellchecker' function of your wordprocessor.
Prepartion of illustrations
Preparation of electronic illustrations
A detailed guide on electronic artwork is available on our website: http://www.elsevier.com/artworkinstructions
You are urged to visit this site; some excerpts from the detailed information are given here.
Formats
Regardless of the application used, when your electronic artwork is finalised, please "save as" or convert the images to one of the following formats (Note the resolution requirements for line drawings, halftones, and line/halftone combinations are given below.):
EPS: Vector drawings. Embed the font or save the text as "graphics".
TIFF: Colour or greyscale photographs (halftones): always use a minimum of 300dpi.
TIFF: Bitmapped line drawings : use a minimum of 1000dpi.
TIFF: Combinations bitmapped line/halftone (colour or greyscale): a minimum of 500dpi is required. DOC, XLS, or PPT: if your electronic artwork is created in any of these Microsoft Office applications please supply "as is".
Please do not:
?Supply embedded graphics or wordprocessor (spreadsheet, presentation) documentation:
?Supply files that are optimised for screen use (like GIF, BMP, PICT, WPG); the reslution is too low;
?Supply files that are too low in resolution;
?Submit graphics that are disproportionately large for the content.
Captions
Ensure that each illustration has a caption. Supply captions on a separate sheet, not attached to the figure. A caption should comprise a brief title (not on the figure itself) and a description of the illustration. Keep text in the illustrations themselves to a minimum but explain all symbols and abbreviations used.
Colour illustrations.
Please make sure that artwork files are in an acceptable format (TIFF, EPS, or MS Office files) and with the correct resolution. If, together with your accepted article, you submit usable colour figures then Elsevier will ensure, at no additional charge, that these figures will appear in colour on the Web (e.g. ScienceDirect and other sites) regardless of whether or not these illustrations are reproduced in colour in the printed version. For colour reproduction in print, you will receive information regarding the costs from Elsevier after receipt of your accepted article. Please indicate your preference for colour in print or on the Web only. For further information on the preparation of electronic artwork, please see http://www.elsevier.com/artworkinstructions. Please note: Because of technical complications which can arise by converting colour figures to 'grey scale' (for the printed version should you not opt for colour in print) please submit in addition usable black and white prints corresponding to all the colour illustrations.
Proofs
One set of page proofs in PDF format will be sent by e-mail to the corresponding Author (if we do not have an e-mail address then paper proofs will be sent by post). Elsevier now sends PDF proofs which can be annotated; for this you will need to download Adobe Reader version 7 available free from http://www.adobe.com/products/acrobat/readstep2.html. Instructions on how to annotate PDF files will accompany the proofs.
If you do not wish to use the PDF annotations function, you may list the corrections (including replies to the Query Form) and return to Elsevier in an e-mail. Please list your corrections quoting line number. If, for any reason, this is not possible, then mark the corrections and any other comments (including replies to the Query Form) on a printout of your proof and return by fax, or scan the pages and e-mail, or post. Please use this proof only for checking the typesetting, editing, completeness and correctness of text, tables and figures. Significant changes to the article as accepted for publication will only be considered at this stage with permission from the Editor. We will do everything possible to get your article published quickly and accurately. Therefore, it is important to ensure that all of your corrections are sent back to us in one communication: please check carefully before replying, as inclusion of any subsequent corrections cannot be guaranteed. Proofreading is solely your responsibility. Note that Elsevier may proceed with the publication of your article if no response is received.
Author enquiries
Authors can keep a track on the progress of their accepted article by visiting http://www.elsevier.com/trackarticle. In case of problems or questions, authors may contact the Author Support Department, e-mail: authorsupport@elsevier.com
US National Institutes of Health (NIH) voluntary posting/ 'Public Access' policy
Elsevier facilitates author posting in connection with the voluntary posting request of the NIH (referred to as the NIH "Public Access Policy", see http://publicaccess.nih.gov/.) by submitting peer-reviewed author's manuscript directly to PubMed Central on request from the author, immediately after final publication. Please e-mail us at NIHauthorrequest@elsevier.com that your work has received NIH funding (with the NIH grant/project number(s), as well as name and e-mail address of the Principal Investigator(s)) and that you intend to respond to the NIH request. Upon such confirmation, Elsevier will submit to PubMed Central on your behalf a version of your manuscript that will include peer-review comments, for public access posting 12 months after the final publication date. This will ensure that you will have responded fully to the NIH request policy. There will be no need for you to post your manuscript directly to PubMed Central, and any such posting is prohibited (although Elsevier will not request that manuscripts authored and posted by US government employees should be taken down from PubMed Central.) Individual modifications to this general policy may apply t some Elsevier journals and its society publishing partners.
Author's rights
As an author you (or your employer or institution) may do the following:
-make copies (print or electronic) of the article for your own personal use, including for your own classroom teaching use
-make copies and distribute such copies (including through e-mail) of the article to research colleagues, for the personal use by such colleagues (but not commercially or systematically, e.g. via and e-mail list or list server)
-post a pre-print version of the article on Internet websites including electronic pre-print servers, and to retain indefinitely such version or version on such servers or sites
-post a revised personal version of the final version of the final text of the article (to reflect changes made in the peer-review and editing process) on your personal or institutional website or server, with a link to the journal homepage (on elsevier.com)
-present the article at a meeting or conference and to distribute copies of the article to the delegates attending such a meeting
-for your employer, if the article is a 'work for hire', made within the scope of your employment, your employer may use all or part of the information in the article for other intra-company use (e.g., training)
- retain patent and trademark rights and rights to any processes or procedure described in the article
- include the article in full or in part in a thesis or dissertation (provided that this is not to be published commercially)
- use the article or any part therof in a printed compilation of your works, such as collected writings or lecture notes (subsequent to publication of your article in the journal)
- prepare other derivative works, to extend the article into book-length form, or to otherwise re-use portions or excerpts in other works, with full acknowledgement of its original publication in the journal.
Proofs
Proofs will be sent to the author (first named author of multi-authored papers if no corresponding author is identified) and should be returned within 48 hours of receipt. Corrections should be restricted to typesetting errors; any others may be charged to the author. Any queries should be answered in full. Please note that authors are urged to check their proofs carefully before return, since the inclusion of late corrections cannot be guaranteed. Proofs are to be returned to the Log-in Department, Elsevier Ltd., Stover Court, Bampfylde Street, Exeter, Devon EX1 2AH, UK.
Offprints
The corresponding author, at no cost, will be provided with a PDF file of the article via e-mail or alternatively, 25 free paper offprints. The PDF file is a watermarked version of the published article and includes a cover sheet with the journal cover image and a disclaimer outlining the terms and conditions of use.
Additional paper offprints and copies of the issue can be ordered at a specially reduced rate using the order form sent to the corresponding author after the manuscript has been accepted. Orders for reprints (produced after publication of an article) will incur a 50% surcharge.
Author Services
For queries relating to the general submission of manuscripts (including electronic text and artwork) and the status of accepted manuscripts, please contact Author Services, Log-in Department, Elsevier Ltd., The Boulevard, Langford Lane, Kidlington, Oxford OX5 1GB, UK. E-mail: authors@elsevier.co.uk, Fax: +44 (0)1865 843905, Tel: +44 (0)1865 843900.
 |
| |
|
Editorial Board
|
Editorial Board |
|
|
Editor-in-Chief:
|
|
| Abraham Pizam |
Rosen College of Hospitality Management, University of Central Florida, 9907 Universal Blvd., Orlando, Florida 32819-9357; Tel: +1 407-903-8010; Fax: +1 407-903-8140, Tel: +1 407 823-6202, Fax: +1 407 823-5696, Email: apizam@mail.ucf.edu
|
|
|
Editor Emeritus:
|
|
| John O'Connor |
|
|
|
Editorial Assistant:
|
|
| Manuel A. Rivera |
Rosen School of Hospitality Management, University of Central Florida, 9907 Universal Blvd. Orlando, Florida 32819-9357, USA, Tel: +1 407 903 8050, Email: marivera@mail.ucf.edu
|
|
|
Editorial Board:
|
|
| D. Bojanic |
University of Texas at San Antonio, USA
|
|
| D. Chen |
National Taipei University, Taiwan.
|
|
| M. Deery |
Victoria University, Melbourne, Australia
|
|
| Z. Gu |
University of Nevada, USA
|
|
| R. Harrington |
University of Arkansas, USA.
|
|
| P. Harris |
Oxford Brookes University, UK
|
|
| K. Johnson |
Trinity and All Saints College, UK
|
|
| H. Kim |
Dong-A University, Korea.
|
|
| D. Kirk |
Queen Margaret University College, Edinburgh, UK
|
|
| S. Kuºluvan |
University of Nevsehir, Turkey.
|
|
| C. Lashley |
Nottingham Trent University, UK
|
|
| R. Law |
The Hong Kong Polytechnic University, Hong Kong.
|
|
| D. Lee-Ross |
James Cook University, Australia
|
|
| R. Lucas |
Manchester Metropolitan University Business School, UK
|
|
| A. Mattila |
The Pennsylvania State University, USA
|
|
| J. Murphy |
The University of Western Australia, Australia.
|
|
| P. O'Connor |
ESSEC Business School, France
|
|
| H. Oh |
Iowa State University, USA
|
|
| M. Olsen |
Virginia Polytechnic Institute and State University, Blacksburg VA, USA
|
|
| C. Pestana Barros |
Technical University of Lisbon, Portugal.
|
|
| A. Reichel |
Ben-Gurion University of the Negev, Israel
|
|
| D. Reynolds |
Washington State University, USA.
|
|
| M. Riley |
University of Surrey, UK
|
|
| J.R. Brent Ritchie |
University of Calgary, Alberta, Canada
|
|
| A. Roper |
University of Surrey, UK
|
|
| R. Schmidgall |
Michigan State University, USA
|
|
| S. Shoemaker |
University of Houston, USA
|
|
| M. Sigala |
University of the Aegean, Greece.
|
|
| J. Siguaw |
Cornell University, USA
|
|
| P. Weaver |
Virginia Polytechnic and State University, USA
|
|
| R.C. Wood |
Oberoi Centre of Learning and Development, India.
|
|
字顺( Alphabetical List of Journals):
返回页首 