期刊名称:SEIZURE-EUROPEAN JOURNAL OF EPILEPSY

ISSN:1059-1311
版本:SCI-CDE
出版频率:Monthly
出版社:W B SAUNDERS CO LTD, 32 JAMESTOWN RD, LONDON, ENGLAND, NW1 7BY
  出版社网址:http://www.elsevier.com
期刊网址:http://www.seizure-journal.com/
影响因子:3.184
主题范畴:CLINICAL NEUROLOGY;    NEUROSCIENCES

期刊简介(About the journal)    投稿须知(Instructions to Authors)    编辑部信息(Editorial Board)   



About the journal

Cover Image

Seizure - European Journal of Epilepsy is an international journal owned by Epilepsy Action (the largest member led epilepsy organisation in the UK). It provides a forum for papers on all topics related to epilepsy and seizure disorders.

Seizure focuses especially on clinical and psychosocial aspects, but will publish papers on the basic sciences related to the condition itself, the differential diagnosis, natural history and epidemiology of seizures, as well as the investigation and practical management of seizure disorders (including drug treatment, neurosurgery and non-medical or behavioural treatments).

The journal reflects the social and psychological burden and impact of the condition on people with epilepsy, their families and society at large, and the methods and ideas that may help to alleviate the disability and stigma, which the condition may cause. The journal aims to share and disseminate knowledge between all disciplines that work in the field of epilepsy.

Abstracting

  • CINAHL
  • Current Contents / Clinical Medicine
  • MEDLINE®
  • EMBASE
  • Neuroscience Citation Index
  • Psych INFO, SciSearch, MEDLARS
  • Psychology Abstracts
  • Research Alert
  • E-psyche
  • Scopus

 


Instructions to Authors



Types of articles

Seizure - European Journal of Epilepsy publishes the following types of article:

1.1 Peer-reviewed articles
a. Full reviews.
Seizure welcomes comprehensive reviews on all subjects relating to epilepsy and other seizure disorders. Authors planning/proposing are invited to discuss their ideas with Editor-in-Chief prior to submission. Full reviews should be preceded by an abstract. Full reviews should not exceed 7,000 words, include no more than 6 figures or tables and 150 references.

b. Focused reviews.
Seizure is keen to publish focused reviews, especially on the latest developments in particular fields or on topics which are currently debated by clinicians and researchers. Authors are welcome to approach the Editor-in-Chief with their idea for a focused review prior to submission. Focused reviews should be preceded by an abstract. Focused reviews should be 1,500-2,500 words, and include no more than 3 figures or tables and 50 references.

c. Full-length original research articles.
The body of the text of these articles should be limited in length to 4,000 words, and there should be a maximum of 6 figures or tables. Additional figures, tables and other material (such as associated videos) can be submitted as online only Supporting Information (see section 'preparation of manuscripts' for further details). Full length research articles should be preceded by an abstract. The body of the text of the article should be clearly structured into 1) Introduction, 2) Methods 3) Discussion, 4) Conclusion and 5) References.

d. Short communications.
Comprise a number of different kinds of previously unpublished materials including short reports or small case series. Short communications should be preceded by an abstract. The body of the text is limited to 1,400 words. There are no more than 12 references, and 2 figures or tables (combined).

e. Case reports (Clinical Letters).
Seizure will also publish particularly instructive case reports in the format of Clinical Letters. Clinical Letters will not be preceded by an abstract. The word count is limited to 1,000 words. Clinical Letters can only include a maximum of 4 references and 2 figures or tables (combined), authors may include additional reading as supplementary material.

f. Letters to the Editor
Letters containing critical assessment of papers recently published in the Seizure - European Journal of Epilepsy will be considered for publication in the correspondence section. Letters should not exceed 1,000 words including references as necessary, one table or one figure. Letters should be typed in double spacing, should have a heading and no abbreviations. If related to a previously published article, the article should be identified by title, author(s), and volume/page numbers. All letters are subject to editorial review. At the Editor's discretion, a letter may be sent to authors of the original paper for comment, and both letter and reply may be published together.

1.2 Editorially-reviewed material
Other contributions than original research or review articles will be published at the discretion of the Editor-in-Chief, with only editorial review. Such material includes: obituaries, workshop reports and conference summaries, letters/commentary to the Editors (500 word limit, exceptionally including figures or tables), special (brief) reports from ILAE Commissions or other working groups, book reviews and announcements.

1.3 Supplements / Special Editions
The Editor-in-Chief invites ideas for supplements or special editions of Seizure including meeting abstracts. Such materials may be published, but only after prior arrangement with the Editor-in-Chief. Supplements will incur a charge. The page rate for proposed supplements can be negotiated with the Editor-in- Chief. Special editions are issues of Seizure wholly or partially dedicated to one particular topic. They may be edited or co-edited by internationally recognised experts in their field. Such experts do not need to be members of the Editorial Board of Seizure and are welcome to approach the Editor-in-Chief with their ideas. Special editions of Seizure would be expected to contain the same kind of manuscripts which are published in normal editions.




Ethics in publishing

For information on Ethics in publishing and Ethical guidelines for journal publication see External link http://www.elsevier.com/publishingethics and External link http://www.elsevier.com/journal-authors/ethics.

Conflict of interest

All authors must disclose any financial and personal relationships with other people or organizations that could inappropriately influence (bias) their work. Examples of potential conflicts of interest include employment, consultancies, stock ownership, honoraria, paid expert testimony, patent applications/registrations, and grants or other funding. See also External link http://www.elsevier.com/conflictsofinterest. Further information and an example of a Conflict of Interest form can be found at: External link http://help.elsevier.com/app/answers/detail/a_id/286/p/7923.

Submission declaration and verification

Submission of an article implies that the work described has not been published previously (except in the form of an abstract or as part of a published lecture or academic thesis or as an electronic preprint, see External link http://www.elsevier.com/postingpolicy), that it is not under consideration for publication elsewhere, that its publication is approved by all authors and tacitly or explicitly by the responsible authorities where the work was carried out, and that, if accepted, it will not be published elsewhere in the same form, in English or in any other language, including electronically without the written consent of the copyright-holder. To verify originality, your article may be checked by the originality detection service CrossCheck External link http://www.elsevier.com/editors/plagdetect.

Changes to authorship

This policy concerns the addition, deletion, or rearrangement of author names in the authorship of accepted manuscripts:
Before the accepted manuscript is published in an online issue: Requests to add or remove an author, or to rearrange the author names, must be sent to the Journal Manager from the corresponding author of the accepted manuscript and must include: (a) the reason the name should be added or removed, or the author names rearranged and (b) written confirmation (e-mail, fax, letter) from all authors that they agree with the addition, removal or rearrangement. In the case of addition or removal of authors, this includes confirmation from the author being added or removed. Requests that are not sent by the corresponding author will be forwarded by the Journal Manager to the corresponding author, who must follow the procedure as described above. Note that: (1) Journal Managers will inform the Journal Editors of any such requests and (2) publication of the accepted manuscript in an online issue is suspended until authorship has been agreed.
After the accepted manuscript is published in an online issue: Any requests to add, delete, or rearrange author names in an article published in an online issue will follow the same policies as noted above and result in a corrigendum.

Article transfer service

This journal is part of our Article Transfer Service. This means that if the Editor feels your article is more suitable in one of our other participating journals, then you may be asked to consider transferring the article to one of those. If you agree, your article will be transferred automatically on your behalf with no need to reformat. More information about this can be found here: External link http://www.elsevier.com/authors/article-transfer-service.

Copyright

This journal offers authors a choice in publishing their research: Open Access and Subscription.

For Subscription articles
Upon acceptance of an article, authors will be asked to complete a 'Journal Publishing Agreement' (for more information on this and copyright, see External link http://www.elsevier.com/copyright). An e-mail will be sent to the corresponding author confirming receipt of the manuscript together with a 'Journal Publishing Agreement' form or a link to the online version of this agreement.
Subscribers may reproduce tables of contents or prepare lists of articles including abstracts for internal circulation within their institutions. Permission of the Publisher is required for resale or distribution outside the institution and for all other derivative works, including compilations and translations (please consult External link http://www.elsevier.com/permissions). If excerpts from other copyrighted works are included, the author(s) must obtain written permission from the copyright owners and credit the source(s) in the article. Elsevier has preprinted forms for use by authors in these cases: please consult External link http://www.elsevier.com/permissions.

For Open Access articles
Upon acceptance of an article, authors will be asked to complete an 'Exclusive License Agreement' (for more information see External link http://www.elsevier.com/OAauthoragreement). Permitted reuse of open access articles is determined by the author's choice of user license (see External link http://www.elsevier.com/openaccesslicenses).

Retained author rights
As an author you (or your employer or institution) retain certain rights. For more information on author rights for:
Subscription articles please see External link http://www.elsevier.com/journal-authors/author-rights-and-responsibilities.
Open access articles please see External link http://www.elsevier.com/OAauthoragreement.

Role of the funding source

You are requested to identify who provided financial support for the conduct of the research and/or preparation of the article and to briefly describe the role of the sponsor(s), if any, in study design; in the collection, analysis and interpretation of data; in the writing of the report; and in the decision to submit the article for publication. If the funding source(s) had no such involvement then this should be stated.

Funding body agreements and policies

Elsevier has established agreements and developed policies to allow authors whose articles appear in journals published by Elsevier, to comply with potential manuscript archiving requirements as specified as conditions of their grant awards. To learn more about existing agreements and policies please visit External link http://www.elsevier.com/fundingbodies.

Open access

This journal offers authors a choice in publishing their research:

Open Access
• Articles are freely available to both subscribers and the wider public with permitted reuse
• An Open Access publication fee is payable by authors or their research funder
Subscription
• Articles are made available to subscribers as well as developing countries and patient groups through our access programs (External link http://www.elsevier.com/access)
• No Open Access publication fee

All articles published Open Access will be immediately and permanently free for everyone to read and download. Permitted reuse is defined by your choice of one of the following Creative Commons user licenses:
Creative Commons Attribution-NonCommercial-ShareAlike (CC BY-NC-SA): for non-commercial purposes, lets others distribute and copy the article, to create extracts, abstracts and other revised versions, adaptations or derivative works of or from an article (such as a translation), to include in a collective work (such as an anthology), to text and data mine the article, as long as they credit the author(s), do not represent the author as endorsing their adaptation of the article, do not modify the article in such a way as to damage the author's honor or reputation, and license their new adaptations or creations under identical terms (CC BY-NC-SA).
Creative Commons Attribution-NonCommercial-NoDerivs (CC BY-NC-ND): for non-commercial purposes, lets others distribute and copy the article, and to include in a collective work (such as an anthology), as long as they credit the author(s) and provided they do not alter or modify the article.

Elsevier has established agreements with funding bodies, External link http://www.elsevier.com/fundingbodies. This ensures authors can comply with funding body Open Access requirements, including specific user licenses, such as CC BY. Some authors may also be reimbursed for associated publication fees. If you need to comply with your funding body policy, you can apply for the CC BY license after your manuscript is accepted for publication.

To provide Open Access, this journal has a publication fee which needs to be met by the authors or their research funders for each article published Open Access.
Your publication choice will have no effect on the peer review process or acceptance of submitted articles.

The publication fee for this journal is $2,200, excluding taxes. Learn more about Elsevier's pricing policy: External link http://www.elsevier.com/openaccesspricing.

Language (usage and editing services)

Please write your text in good English (American or British usage is accepted, but not a mixture of these). Authors who feel their English language manuscript may require editing to eliminate possible grammatical or spelling errors and to conform to correct scientific English may wish to use the English Language Editing service available from Elsevier's WebShop (External link http://webshop.elsevier.com/languageediting/) or visit our customer support site (External link http://support.elsevier.com) for more information.

Informed consent and patient details

Studies on patients or volunteers require ethics committee approval and informed consent, which should be documented in the paper. Appropriate consents, permissions and releases must be obtained where an author wishes to include case details or other personal information or images of patients and any other individuals in an Elsevier publication. Written consents must be retained by the author and copies of the consents or evidence that such consents have been obtained must be provided to Elsevier on request. For more information, please review the Elsevier Policy on the Use of Images or Personal Information of Patients or other Individuals, External link http://www.elsevier.com/patient-consent-policy. Unless you have written permission from the patient (or, where applicable, the next of kin), the personal details of any patient included in any part of the article and in any supplementary materials (including all illustrations and videos) must be removed before submission.

Submission

Submission to this journal proceeds totally online and you will be guided stepwise through the creation and uploading of your files. The system automatically converts source files to a single PDF file of the article, which is used in the peer-review process. Please note that even though manuscript source files are converted to PDF files at submission for the review process, these source files are needed for further processing after acceptance. All correspondence, including notification of the Editor's decision and requests for revision, takes place by e-mail removing the need for a paper trail.

Please submit your article via External link http://ees.elsevier.com/seizure/

Referees

Please submit, with the manuscript, the names, addresses and e-mail addresses of three potential referees. Note that the editor retains the sole right to decide whether or not the suggested reviewers are used.




Use of word processing software

It is important that the file be saved in the native format of the word processor used. The text should be in single-column format. Keep the layout of the text as simple as possible. Most formatting codes will be removed and replaced on processing the article. In particular, do not use the word processor's options to justify text or to hyphenate words. However, do use bold face, italics, subscripts, superscripts etc. When preparing tables, if you are using a table grid, use only one grid for each individual table and not a grid for each row. If no grid is used, use tabs, not spaces, to align columns. The electronic text should be prepared in a way very similar to that of conventional manuscripts (see also the Guide to Publishing with Elsevier: External link http://www.elsevier.com/guidepublication). Note that source files of figures, tables and text graphics will be required whether or not you embed your figures in the text. See also the section on Electronic artwork.
To avoid unnecessary errors you are strongly advised to use the 'spell-check' and 'grammar-check' functions of your word processor.

Article structure



Subdivision - unnumbered sections

Divide your article into clearly defined sections. Each subsection is given a brief heading. Each heading should appear on its own separate line. Subsections should be used as much as possible when cross-referencing text: refer to the subsection by heading as opposed to simply 'the text'.

Introduction

State the objectives of the work and provide an adequate background, avoiding a detailed literature survey or a summary of the results.

Material and methods

Provide sufficient detail to allow the work to be reproduced. Methods already published should be indicated by a reference: only relevant modifications should be described.

Theory/calculation

A Theory section should extend, not repeat, the background to the article already dealt with in the Introduction and lay the foundation for further work. In contrast, a Calculation section represents a practical development from a theoretical basis.

Results

Results should be clear and concise.

Only in case of short communications, the results and discussion sections may be combined. Results should usually be presented in graphic or tabular form, rather than discursively. There should be no duplication in text, tables and figures. Experimental conclusions should normally be based on adequate numbers of observations with statistical analysis of variance and the significance of differences. The number of individual values represented by a mean should be indicated.

Discussion

This should explore the significance of the results of the work, not repeat them. A combined Results and Discussion section is often appropriate. Avoid extensive citations and discussion of published literature.

Speculative discussion is not discouraged, but the speculation should be based on the data presented and identified as such.

In most cases a discussion of the limitations is appropriate and should be included in this section of the manuscript.

Conclusions

The main conclusions of the study may be presented in a short Conclusions section, which may stand alone or form a subsection of a Discussion or Results and Discussion section.

Appendices

If there is more than one appendix, they should be identified as A, B, etc. Formulae and equations in appendices should be given separate numbering: Eq. (A.1), Eq. (A.2), etc.; in a subsequent appendix, Eq. (B.1) and so on. Similarly for tables and figures: Table A.1; Fig. A.1, etc.

Essential title page information

Title. Concise and informative. Titles are often used in information-retrieval systems. Avoid abbreviations and formulae where possible.
Author names and affiliations. Where the family name may be ambiguous (e.g., a double name), please indicate this clearly. Present the authors' affiliation addresses (where the actual work was done) below the names. Indicate all affiliations with a lower-case superscript letter immediately after the author's name and in front of the appropriate address. Provide the full postal address of each affiliation, including the country name and, if available, the e-mail address of each author.
Corresponding author. Clearly indicate who will handle correspondence at all stages of refereeing and publication, also post-publication. Ensure that phone numbers (with country and area code) are provided in addition to the e-mail address and the complete postal address. Contact details must be kept up to date by the corresponding author.
Present/permanent address. If an author has moved since the work described in the article was done, or was visiting at the time, a 'Present address' (or 'Permanent address') may be indicated as a footnote to that author's name. The address at which the author actually did the work must be retained as the main, affiliation address. Superscript Arabic numerals are used for such footnotes.

Correct author name format

To prevent confusion please ensure that all author names are listed in the following format; first (Christian) name first and the last name (Surname/Family) last. This is specified because Spain, China and some other countries often write them differently and this causes confusion with databases like MEDLINE.

Abstract

A concise and factual abstract is required. The abstract should state briefly the purpose of the research, the principal results and major conclusions. An abstract is often presented separately from the article, so it must be able to stand alone. For this reason, References should be avoided, but if essential, then cite the author(s) and year(s). Also, non-standard or uncommon abbreviations should be avoided, but if essential they must be defined at their first mention in the abstract itself.

Abstracts (when required) should be structured, using the subheadings purpose, methods, results, conclusion. They should be no longer than 250 words. Case reports (Clinical Letters) do not need to be preceded by an abstract.

Graphical abstract

A Graphical abstract is optional and should summarize the contents of the article in a concise, pictorial form designed to capture the attention of a wide readership online. Authors must provide images that clearly represent the work described in the article. Graphical abstracts should be submitted as a separate file in the online submission system. Image size: Please provide an image with a minimum of 531 × 1328 pixels (h × w) or proportionally more. The image should be readable at a size of 5 × 13 cm using a regular screen resolution of 96 dpi. Preferred file types: TIFF, EPS, PDF or MS Office files. See External link http://www.elsevier.com/graphicalabstracts for examples.
Authors can make use of Elsevier's Illustration and Enhancement service to ensure the best presentation of their images also in accordance with all technical requirements: Illustration Service.

Highlights

Highlights are mandatory for this journal. They consist of a short collection of bullet points that convey the core findings of the article and should be submitted in a separate file in the online submission system. Please use 'Highlights' in the file name and include 3 to 5 bullet points (maximum 85 characters, including spaces, per bullet point). See External link http://www.elsevier.com/highlights for examples.

Please note that the Highlights section above only applies to Full Length Articles and Reviews.

Keywords

Immediately after the abstract, provide a maximum of 6 keywords, using British spelling and avoiding general and plural terms and multiple concepts (avoid, for example, 'and', 'of'). Be sparing with abbreviations: only abbreviations firmly established in the field may be eligible. These keywords will be used for indexing purposes.

Abbreviations

Define abbreviations that are not standard in this field in a footnote to be placed on the first page of the article. Such abbreviations that are unavoidable in the abstract must be defined at their first mention there, as well as in the footnote. Ensure consistency of abbreviations throughout the article.

Acknowledgements

Collate acknowledgements in a separate section at the end of the article before the references and do not, therefore, include them on the title page, as a footnote to the title or otherwise. List here those individuals who provided help during the research (e.g., providing language help, writing assistance or proof reading the article, etc.).

Nomenclature and units

Follow internationally accepted rules and conventions: use the international system of units (SI). If other quantities are mentioned, give their equivalent in SI. You are urged to consult IUPAC: Nomenclature of Organic Chemistry: External link http://www.iupac.org/ for further information.

Database linking

Elsevier encourages authors to connect articles with external databases, giving their readers one-click access to relevant databases that help to build a better understanding of the described research. Please refer to relevant database identifiers using the following format in your article: Database: xxxx (e.g., TAIR: AT1G01020; CCDC: 734053; PDB: 1XFN). See External link http://www.elsevier.com/databaselinking for more information and a full list of supported databases.

Math formulae

Present simple formulae in the line of normal text where possible and use the solidus (/) instead of a horizontal line for small fractional terms, e.g., X/Y. In principle, variables are to be presented in italics. Powers of e are often more conveniently denoted by exp. Number consecutively any equations that have to be displayed separately from the text (if referred to explicitly in the text).

Footnotes

Footnotes should be used sparingly. Number them consecutively throughout the article, using superscript Arabic numbers. Many wordprocessors build footnotes into the text, and this feature may be used. Should this not be the case, indicate the position of footnotes in the text and present the footnotes themselves separately at the end of the article. Do not include footnotes in the Reference list.
Table footnotes
Indicate each footnote in a table with a superscript lowercase letter.

Artwork



Electronic artwork

General points
• Make sure you use uniform lettering and sizing of your original artwork.
• Embed the used fonts if the application provides that option.
• Aim to use the following fonts in your illustrations: Arial, Courier, Times New Roman, Symbol, or use fonts that look similar.
• Number the illustrations according to their sequence in the text.
• Use a logical naming convention for your artwork files.
• Provide captions to illustrations separately.
• Size the illustrations close to the desired dimensions of the printed version.
• Submit each illustration as a separate file.
A detailed guide on electronic artwork is available on our website:
External link http://www.elsevier.com/artworkinstructions
You are urged to visit this site; some excerpts from the detailed information are given here.
Formats
If your electronic artwork is created in a Microsoft Office application (Word, PowerPoint, Excel) then please supply 'as is' in the native document format.
Regardless of the application used other than Microsoft Office, when your electronic artwork is finalized, please 'Save as' or convert the images to one of the following formats (note the resolution requirements for line drawings, halftones, and line/halftone combinations given below):
EPS (or PDF): Vector drawings, embed all used fonts.
TIFF (or JPEG): Color or grayscale photographs (halftones), keep to a minimum of 300 dpi.
TIFF (or JPEG): Bitmapped (pure black & white pixels) line drawings, keep to a minimum of 1000 dpi.
TIFF (or JPEG): Combinations bitmapped line/half-tone (color or grayscale), keep to a minimum of 500 dpi.
Please do not:
• Supply files that are optimized for screen use (e.g., GIF, BMP, PICT, WPG); these typically have a low number of pixels and limited set of colors;
• Supply files that are too low in resolution;
• Submit graphics that are disproportionately large for the content.

Color artwork

Please make sure that artwork files are in an acceptable format (TIFF (or JPEG), EPS (or PDF), or MS Office files) and with the correct resolution. If, together with your accepted article, you submit usable color figures then Elsevier will ensure, at no additional charge, that these figures will appear in color on the Web (e.g., ScienceDirect and other sites) regardless of whether or not these illustrations are reproduced in color in the printed version. For color reproduction in print, you will receive information regarding the costs from Elsevier after receipt of your accepted article. Please indicate your preference for color: in print or on the Web only. For further information on the preparation of electronic artwork, please see External link http://www.elsevier.com/artworkinstructions.
Please note: Because of technical complications which can arise by converting color figures to 'gray scale' (for the printed version should you not opt for color in print) please submit in addition usable black and white versions of all the color illustrations.

Figure captions

Ensure that each illustration has a caption. Supply captions separately, not attached to the figure. A caption should comprise a brief title (not on the figure itself) and a description of the illustration. Keep text in the illustrations themselves to a minimum but explain all symbols and abbreviations used.

Text graphics

Text graphics may be embedded in the text at the appropriate position. See further under Electronic artwork.

Tables

Number tables consecutively in accordance with their appearance in the text. Place footnotes to tables below the table body and indicate them with superscript lowercase letters. Avoid vertical rules. Be sparing in the use of tables and ensure that the data presented in tables do not duplicate results described elsewhere in the article.

References



Citation in text

Please ensure that every reference cited in the text is also present in the reference list (and vice versa). Any references cited in the abstract must be given in full. Unpublished results and personal communications are not recommended in the reference list, but may be mentioned in the text. If these references are included in the reference list they should follow the standard reference style of the journal and should include a substitution of the publication date with either 'Unpublished results' or 'Personal communication'. Citation of a reference as 'in press' implies that the item has been accepted for publication.

Web references

As a minimum, the full URL should be given and the date when the reference was last accessed. Any further information, if known (DOI, author names, dates, reference to a source publication, etc.), should also be given. Web references can be listed separately (e.g., after the reference list) under a different heading if desired, or can be included in the reference list.

References in a special issue

Please ensure that the words 'this issue' are added to any references in the list (and any citations in the text) to other articles in the same Special Issue.

Reference style

Text: Indicate references by superscript numbers in the text. The actual authors can be referred to, but the reference number(s) must always be given.
List: Number the references in the list in the order in which they appear in the text.
Examples:
Reference to a journal publication:
1. Van der Geer J, Hanraads JAJ, Lupton RA. The art of writing a scientific article. J Sci Commun 2010;163:51–9.
Reference to a book:
2. Strunk Jr W, White EB. The elements of style. 4th ed. New York: Longman; 2000.
Reference to a chapter in an edited book:
3. Mettam GR, Adams LB. How to prepare an electronic version of your article. In: Jones BS, Smith RZ, editors. Introduction to the electronic age, New York: E-Publishing Inc; 2009, p. 281–304.
Note shortened form for last page number. e.g., 51–9, and that for more than 6 authors the first 6 should be listed followed by 'et al.' For further details you are referred to 'Uniform Requirements for Manuscripts submitted to Biomedical Journals' (J Am Med Assoc 1997;277:927–34) (see also External link http://www.nlm.nih.gov/bsd/uniform_requirements.html).

Journal abbreviations source

Journal names should be abbreviated according to the List of Title Word Abbreviations: External link http://www.issn.org/services/online-services/access-to-the-ltwa/.

Video data

Elsevier accepts video material and animation sequences to support and enhance your scientific research. Authors who have video or animation files that they wish to submit with their article are strongly encouraged to include links to these within the body of the article. This can be done in the same way as a figure or table by referring to the video or animation content and noting in the body text where it should be placed. All submitted files should be properly labeled so that they directly relate to the video file's content. In order to ensure that your video or animation material is directly usable, please provide the files in one of our recommended file formats with a preferred maximum size of 50 MB. Video and animation files supplied will be published online in the electronic version of your article in Elsevier Web products, including ScienceDirect: External link http://www.sciencedirect.com. Please supply 'stills' with your files: you can choose any frame from the video or animation or make a separate image. These will be used instead of standard icons and will personalize the link to your video data. For more detailed instructions please visit our video instruction pages at External link http://www.elsevier.com/artworkinstructions. Note: since video and animation cannot be embedded in the print version of the journal, please provide text for both the electronic and the print version for the portions of the article that refer to this content.

AudioSlides

The journal encourages authors to create an AudioSlides presentation with their published article. AudioSlides are brief, webinar-style presentations that are shown next to the online article on ScienceDirect. This gives authors the opportunity to summarize their research in their own words and to help readers understand what the paper is about. More information and examples are available at External link http://www.elsevier.com/audioslides. Authors of this journal will automatically receive an invitation e-mail to create an AudioSlides presentation after acceptance of their paper.

Supplementary data

Elsevier accepts electronic supplementary material to support and enhance your scientific research. Supplementary files offer the author additional possibilities to publish supporting applications, high-resolution images, background datasets, sound clips and more. Supplementary files supplied will be published online alongside the electronic version of your article in Elsevier Web products, including ScienceDirect: External link http://www.sciencedirect.com. In order to ensure that your submitted material is directly usable, please provide the data in one of our recommended file formats. Authors should submit the material in electronic format together with the article and supply a concise and descriptive caption for each file. For more detailed instructions please visit our artwork instruction pages at External link http://www.elsevier.com/artworkinstructions.

3D neuroimaging

You can enrich your online articles by providing 3D neuroimaging data in NIfTI format. This will be visualized for readers using the interactive viewer embedded within your article, and will enable them to: browse through available neuroimaging datasets; zoom, rotate and pan the 3D brain reconstruction; cut through the volume; change opacity and color mapping; switch between 3D and 2D projected views; and download the data. The viewer supports both single (.nii) and dual (.hdr and .img) NIfTI file formats. Recommended size of a single uncompressed dataset is 100 MB or less. Multiple datasets can be submitted. Each dataset will have to be zipped and uploaded to the online submission system via the '3D neuroimaging data' submission category. Please provide a short informative description for each dataset by filling in the 'Description' field when uploading a dataset. Note: all datasets will be available for downloading from the online article on ScienceDirect. If you have concerns about your data being downloadable, please provide a video instead. For more information see: External link http://www.elsevier.com/3DNeuroimaging.

Submission checklist

The following list will be useful during the final checking of an article prior to sending it to the journal for review. Please consult this Guide for Authors for further details of any item.
Ensure that the following items are present:
One author has been designated as the corresponding author with contact details:
• E-mail address
• Full postal address
• Phone numbers
All necessary files have been uploaded, and contain:
• Keywords
• All figure captions
• All tables (including title, description, footnotes)
Further considerations
• Manuscript has been 'spell-checked' and 'grammar-checked'
• References are in the correct format for this journal
• All references mentioned in the Reference list are cited in the text, and vice versa
• Permission has been obtained for use of copyrighted material from other sources (including the Web)
• Color figures are clearly marked as being intended for color reproduction on the Web (free of charge) and in print, or to be reproduced in color on the Web (free of charge) and in black-and-white in print
• If only color on the Web is required, black-and-white versions of the figures are also supplied for printing purposes
For any further information please visit our customer support site at External link http://support.elsevier.com.




Use of the Digital Object Identifier

The Digital Object Identifier (DOI) may be used to cite and link to electronic documents. The DOI consists of a unique alpha-numeric character string which is assigned to a document by the publisher upon the initial electronic publication. The assigned DOI never changes. Therefore, it is an ideal medium for citing a document, particularly 'Articles in press' because they have not yet received their full bibliographic information. Example of a correctly given DOI (in URL format; here an article in the journal Physics Letters B):
External link http://dx.doi.org/10.1016/j.physletb.2010.09.059
When you use a DOI to create links to documents on the web, the DOIs are guaranteed never to change.

Proofs

One set of page proofs (as PDF files) will be sent by e-mail to the corresponding author (if we do not have an e-mail address then paper proofs will be sent by post) or, a link will be provided in the e-mail so that authors can download the files themselves. Elsevier now provides authors with PDF proofs which can be annotated; for this you will need to download Adobe Reader version 9 (or higher) available free from External link http://get.adobe.com/reader. Instructions on how to annotate PDF files will accompany the proofs (also given online). The exact system requirements are given at the Adobe site: External link http://www.adobe.com/products/reader/tech-specs.html.
If you do not wish to use the PDF annotations function, you may list the corrections (including replies to the Query Form) and return them to Elsevier in an e-mail. Please list your corrections quoting line number. If, for any reason, this is not possible, then mark the corrections and any other comments (including replies to the Query Form) on a printout of your proof and return by fax, or scan the pages and e-mail, or by post. Please use this proof only for checking the typesetting, editing, completeness and correctness of the text, tables and figures. Significant changes to the article as accepted for publication will only be considered at this stage with permission from the Editor. We will do everything possible to get your article published quickly and accurately – please let us have all your corrections within 48 hours. It is important to ensure that all corrections are sent back to us in one communication: please check carefully before replying, as inclusion of any subsequent corrections cannot be guaranteed. Proofreading is solely your responsibility. Note that Elsevier may proceed with the publication of your article if no response is received.

Offprints

The corresponding author, at no cost, will be provided with a PDF file of the article via e-mail (the PDF file is a watermarked version of the published article and includes a cover sheet with the journal cover image and a disclaimer outlining the terms and conditions of use). For an extra charge, paper offprints can be ordered via the offprint order form which is sent once the article is accepted for publication. Both corresponding and co-authors may order offprints at any time via Elsevier's WebShop (External link http://webshop.elsevier.com/myarticleservices/offprints). Authors requiring printed copies of multiple articles may use Elsevier WebShop's 'Create Your Own Book' service to collate multiple articles within a single cover (External link http://webshop.elsevier.com/myarticleservices/offprints/myarticlesservices/booklets).


For inquiries relating to the submission of articles (including electronic submission) please visit this journal's homepage. For detailed instructions on the preparation of electronic artwork, please visit External link http://www.elsevier.com/artworkinstructions. Contact details for questions arising after acceptance of an article, especially those relating to proofs, will be provided by the publisher. You can track accepted articles at External link http://www.elsevier.com/trackarticle. You can also check our Author FAQs at External link http://www.elsevier.com/authorFAQ and/or contact Customer Support via External link http://support.elsevier.com.

Editorial Board
• Behavioural assessment and test development
• Relevance of clinical measures for every day life (ecological validity)
• Outcome and quality control of epilepsy treatment:
- Psychotropic effects of antiepileptic drugs incl. pharmaco-genetics
- Short- and longer-term outcome of epilepsy surgery and brain stimulation procedures
• Psychological interventions and rehabilitative care in epilepsy patients
W.P. Liao

Adult Neurologist, Guangzhou, China
• Genetics of epilepsy
• Biophysiology and mechanism of epilepsy
• Classification and terminology of epilepsy
• Developmental malformations associated with epilepsy
• Gene expression and regulation
• Movement disorders

T. Loddenkemper

Paediatric Neurologist, Boston, MA, USA
• Comparative effectiveness and interventional clinical trials in pediatric status epilepticus and epileptic encephalopathies
• Inventing, evaluating and implementing clinically relevant biomarkers and treatment paradigms to assess and benchmark these based on clinical data, neurophysiology, imaging, pharmacogenomics and genetics, in collaboration with basic researcher locally, nationally, and internationally
• Developing and evaluating monitoring tools for clinical biomarkers to further clinical epilepsy outcome measures including seizure characterization, neuropsychological outcome assessment, and quality of life assessment by means of seizure sensors and electronic tools including seizure tracking and outcome prediction modeling software, novel in- and outpatient monitoring devices and algorithms, neurophysiological, biochemical and genetic periodicity markers and implementation of these techniques into clinical workflow
• Research networks and collaborations are essential for our work, like the pediatric status epilepticus research group (www.pserg.org), the Pediatric Epilepsy Research Consortium , the pediatric critical care epilepsy research group, the Critical Care EEG Monitoring Research consortium, the pediatric neurocritical care research group and other consortia

Social Media Editor
R. Thomas

Adult Neurologist, Cardiff, UK
• The genetic basis of the epilepsies
• Risk factors and etiologies of SUDEP
• Involving people with epilepsy as partners in research
• Personal stories of people with epilepsy
• The psychiatric comorbidities of epilepsy

Editorial Board

N.S. Abend

Philadelphia, Pennsylvania, USA

G. Baker

Liverpool, UK

S. Beyenburg

Luxembourg City, Luxembourg

M. Brodie

M. Brodie

General physician and clinical pharmacologist, Glasgow, UK
Research Interests:
• Antiepileptic drug neuropharmacology
• Combining antiepileptic drugs
• Regulatory and other drug trials
• Natural history of treated epilepsy
• Pharmacogenomics of treatment outcomes
• Patterns of drug response
• Pharmacological management of epilepsy

J. Carrizosa Moog

J. Carrizosa Moog

Child Neurologist, Medellin, Colombia
Research Interests:
• Pediatric epilepsy
• Genetics in epilepsy syndromes
• Comorbidity
• Social issues and quality of life
• Education

J.J. Craig

Belfast, UK

B. Diehl

London, England, UK

O. Dulac

Paris, France

J.S. Duncan

London, UK

C.E. Elger

Bonn, Germany

A. Gil-Nagel

Madrid, Spain

R. Guerrini

Firenze, Italy

L. Gueye

Dakar, Senegal

L.M.F.F. Guilhoto

San Paulo, Brazil

M. Johnson

London, UK

P. Kwan

Shatin, Hong Kong

K. Malmgren

K. Malmgren

Adult neurologist, Gothenburg, Sweden
Research interests:
• Biological markers for treatment and outcomes of epilepsy
• Methodological aspects of investigations of patients for epilepsy surgery
• Short and long-term outcome assessments after epilepsy surgery

A. Martins da Silva

Porto, Portugal

R. Matsumoto

Kyoto, Japan

A. Mazarati

Los Angeles, California, USA

D.R. Nordli

Chicago, Illinois, USA

M. Oto

Glassgow, Scotland, UK

E. Perucca

E. Perucca

Adult neurologist, Pavia, Italy
Research Interests:
• Outcome assessment in epilepsy
• Medical treatment of epilepsy
• Clinical trial design
• Adverse effects of antiepileptic drugs
• Pharmacokinetics and drug interactions

M. Privitera

Cincinnati, Ohio, USA

S.C. Schachter

Boston, Massachusetts, USA

D. Schmidt

Berlin, Germany

A. Schulze-Bonhage

A. Schulze-Bonhage

Professor of Neurology and Neurophysiology and head of the Epilepsy Center at the University Hospital Freiburg, Germany
Research Interests:
• Improvements in electrophysiological characterization of networks involved in focal epilepsy
��� Neurostimulation as a new therapeutic approach
• Neurophysiological correlates of cognition

J.M. Serratosa

Madrid, Spain

M.L. Sillanpää

M.L. Sillanpää

Turku, Finland
Research Interests:
• Epilepsy
• Epidemiology
• Follow-up studies
• Migraine

H. Stefan

Erlangen, Germany

T. Syed

Cleveland, Ohio, USA

P. Tinuper

Bologna, Italy

J. Wilmshurst

J. Wilmshurst

Paediatric Neurologist, Cape Town, South Africa
Research Interests (related to epilepsy):
• Management and practice of infantile seizures
• Neonatal seizures – optimal management and the effect of seizures on the maturing brain
• Co-morbidities of epilepsy in children
• Optimal care of children in acute convulsive status in resource poor countries
• Electrophysiology: optimizing the tool in resource poor countries
��� Outcomes from basic training courses in electrophysiology
• The role of melatonin in attaining sleep EEGs

P. Wolf

Dianalund, Denmark

E. M. T. Yacubian

São Paulo, Brazil

D. Zhou

Chengdu Sichuan, China

Ç. Özkara

Istanbul, Turkey


Copyright © 2014 武汉大学图书馆 版权所有