期刊名称：JOURNAL OF WIND ENGINEERING AND INDUSTRIAL AERODYNAMICS
 期刊简介(About the journal)
投稿须知(Instructions to Authors)
编辑部信息(Editorial Board)
About the journal
|
The objective of the journal is to provide a means for the publication and interchange of information, on an international basis, on all those aspects of wind engineering that are included in the activities of the International Association for Wind Engineering. These are: social and economic impact of wind effects; wind characteristics and structure, local wind environments, wind loads and structural response, diffusion, pollutant dispersion and matter transport, wind effects on building heat loss and ventilation, wind effects on transport systems, wind power generation, and codification of wind effects.
Papers on these subjects describing full-scale measurements, wind-tunnel simulation studies, computational or theoretical methods are published, as well as papers dealing with the development of techniques and apparatus for wind engineering experiments.
Related Conferences
Details of conferences and meetings, with links to websites, can be accessed under the News item. |
|
Instructions to Authors
Submission of papers
Manuscripts (one original + two copies), accompanied by a covering letter, should be sent to the Editor Professor Nicholas P Jones, Department of Civil and Environmental Engineering, University of Illinois, 205 North Mathews Avenue, Urbana, IL 61801, USA. Email: npjones@uiuc.edu
Original material. By submitting a paper for publication in Journal of Wind Engineering and Industrial Aerodynamics the authors imply that the material has not been published previously nor has been submitted for publication elsewhere.
Refereeing. Submitted papers will be refereed and, if necessary, authors may be invited to revise their manuscript.
Types of contributions
Concisely written research papers are welcome. A number of carefully selected and reviewed conference proceedings can also be published.
Manuscript preparation
Language. All manuscripts should be written in good English.
Structure. Please adhere to the following order: Title, Author(s), Affiliation(s), Abstract, Keywords, Main text, Acknowledgements, Appendices, References, Figure captions, Tables.
Corresponding author. The name, complete postal address, telephone and fax numbers and the e-mail address of the author to whom the proofs are to be sent should be given on the first page of the manuscript.
References
All publications cited in the text should be presented in a list of references following the text of the manuscript. In the text refer to references by a number in square brackets on the line (e.g. Since Peterson [1]), and the full reference should be given in a numerical list at the end of the paper.
References should be given in the following form:
[1] Y. Tominaga, A. Mochidda, CFD preduction of flowfield and snowdrift around a building complex in a snowy region, J. Wind Eng. Ind. Aerodyn. 81 (1999) 273-282.
[2] G.R. Irwin, Onset of fast crack propagation in high strength steel and aluminum alloys, Sagamore Research Conference Proceedings, vol. 2, 1956. p. 289-305.
[3] P.L. Gould, Finite element analysis of shells of revolution. Pitman Advanced Publishing Program, Boston, 1984.
[4] S. Filho, D. Bower, N.J. Smith, The use of predictive bridge management systems to enhance the effective service life, in: Proceedings of the 6th International Conference on Structural Faults and Repair-95 (London, 1995), Engineering Technics Press, Edinburgh, 1995. pp. 31-37.
Illustrations
All illustrations should be provided in camera-ready form, suitable for reproduction (which may include reduction) without retouching. Photographs, charts and diagrams are all to be referred to as "Figure(s)" and should be numbered consecutively in the order to which they are referred. They should accompany the manuscript, but should not be included within the text. All illustrations should be clearly marked on the back with the figure number and the author's name. All figures are to have a caption. Captions should be supplied on a separate sheet.
Line drawings
Good quality printouts on white paper produced in black ink are required. All lettering, graph lines and points on graphs should be sufficiently large and bold to permit reproduction when the diagram has been reduced to a size suitable for inclusion in the journal. Dye-line prints or photocopies are not suitable for reproduction. Do not use any type of shading on computer-generated illustrations.
Photographs
Original photographs must be supplied as they are to be reproduced (e.g. black and white or colour). If necessary, a scale should be marked on the photograph. Please note that photocopies of photographs are not acceptable.
Colour
Colour reproduction is available if the author is willing to bear the additional incremental reproduction and printing costs. Please contact the editorial office for details. A letter confirming the author's willingness to accept these costs should be sent with the revised manuscript.
Authors should note that illustrations will not be returned unless specifically requested.
Tables
Tables should be numbered consecutively and given a suitable caption and each table typed on a separate sheet. Footnotes to tables should be typed below the table and should be referred to by superscript lowercase letters. No vertical rules should be used. Tables should not duplicate results presented elsewhere in the manuscript (e.g. in graphs).
After acceptance
Notification
You will be notified by the Editor of the journal of the acceptance of your article and invited to supply an electronic version of the accepted text, if this is not already available.
Copyright transfer
All authors must sign the "Transfer of Copyright" agreement before the article can be published. This transfer agreement enables Elsevier Science Ltd to protect the copyrighted material for the authors, but does not relinquish the author's proprietary rights. The copyright transfer covers the exclusive rights to reproduce and distribute the article, including reprints, photographic reproductions, microfilm or any other reproductions of similar nature and translations. Includes the right to adapt the article for use in conjunction with computer systems and programs, including reproduction or publication in machine-readable form and incorporation in retrieval systems. Authors are responsible for obtaining from the copyright holder permission to reproduce any figures for which copyright exists.
Proofs
Proofs will be sent to the author (first named author if no corresponding author is identified of multi-authored papers) and should be returned within 48 hours of receipt. Corrections should be restricted to typesetting errors; any others may be charged to the author. Any queries should be answered in full. Please note that authors are urged to check their proofs carefully before return, since the inclusion of late corrections cannot be guaranteed. Proofs are to be returned to the Log-in Department, Elsevier Science BV, Sara Burgerhartstraat 25 (OM), 1055 KV Amsterdam, The Netherlands.
Submission on Disk after Acceptance for Publication
Elsevier Science now publishes all manuscripts using electronic production methods and strongly encourages submission on disk. Please send the disk files of your article with the hardcopy of the accepted version. To ensure fast and easy processing of your submission, please adhere to the following guidelines:
1. Save text and graphics on separate disks.
2. Label all disks with your name, a short version of the article title, the journal to be published in, and the filenames. Please also include details of the software and platform (PC, Mac, UNIX, etc) used to create your files.
3. Ensure that the files on the disk match exactly the hardcopy. In cases of a discrepancy, the hardcopy version will be uses as the definitive version.
4. Always keep a backup copy of the electronic file for reference and safety. Full details of electronic submission and formats can be obtained from http://authors.elsevier.com
Author benefits
No page charges. Publishing in Journal of Wind Engineering and Industrial Aerodynamics is free.
Free offprints. The corresponding author will receive 25 offprints free of charge. An offprint order form will be supplied by the Publisher for ordering any additional paid offprints.
Discount. Contributors to Elsevier Science journals are entitled to a 30% discount on all Elsevier Science books.
Author Enquiries:
For enquiries relating to the submission of articles (including electronic submission where available)please visit the Author Gateway from Elsevier at http://authors.elsevier.com. The Author Gateway also provides the facility to track accepted articles and set up e-mail alerts to inform you of when an article's status changed, as well as detailed artwork guidelines, copyright information, frequently-asked questions and more.
Contact details for questions arising after acceptance of an article, especially those relating to proofs, are provided after registration of an article for publication
Further information
Elsevier Science B.V.,
Journal of Wind Engineering and Industrial Aerodynamics,
Issue Management Physics and Materials Science,
P.O. Box 2759,
1000 CT Amsterdam
The Netherlands
Fax: + 31 20 485 2319.
Editorial Board
Edited by:
N.P. Jones, University of Illinois, Department of Civil and Environmental Engineering, 205 N. Mathews Ave, Urbana, IL 61801, USA. Email: npjones@uiuc.edu
Editorial Board:
J. Blessmann, Universidad Federal do Rio Giande do Sul, Porto Alegre, Brazil
J.E. Cermak, Colorado State University, Fort Collins, CO, USA
N.J. Cook, Anemos Associates Ltd, Hemel Hempstead, UK.
W.A. Dalgliesh, Calgary, Alberta, Canada
A.G. Davenport, London, Ontario, Canada
R.G.J. Flay, Auckland, New Zealand
J. Gandemer, Nantes, France
H.J. Gerhardt, Aachen, Germany
K. Handa, Gothenburg, Sweden
R.I. Harris, Cranfield Institute of Technology, Bedford, UK
J.D. Holmes, Clayton, Victoria, Australia
M. Ito, Bunkyo-ku, Tokyo, Japan
A. Kareem, Notre Dame, IN, USA
T.V. Lawson, Bristol, UK
D. Lindley, Beaconsfield, UK
W.H. Melbourne, Monash University, Clayton, Victoria, Australia
S. Murakami, Tokyo, Japan
N. Narita, Tsukuba-Gun, Japan
D. Olivari, Rhode-St-Genèse, France
M. Pirner, Czechoslovak Academy of Sciences, Prague, Czech Republic
R. Sigbjörnsson, Reykjavik, Iceland
E. Simiu, Gaithersburg, MD, USA
D. Surry, University of Western Ontario, London, Canada
H. Van Koten, Zoetermeer, The Netherlands
R.L. Wardlaw, Gloucester, Ontario, Canada
|
