期刊名称：INTERNATIONAL JOURNAL OF ELECTRICAL POWER & ENERGY SYSTEMS
 期刊简介(About the journal)
投稿须知(Instructions to Authors)
编辑部信息(Editorial Board)
About the journal
The journal covers theoretical developments in electrical power and energy systems and their applications. The coverage embraces: generation and network planning; reliability; long and short term operation; expert systems; neural networks; object oriented systems; system control centres; database and information systems; stock and parameter estimation; system security and adequacy; network theory, modelling and computation; small and large system dynamics; dynamic model identification; on-line control including load and switching control; protection; distribution systems; energy economics; impact of non-conventional systems; and man-machine interfaces.
As well as original research papers, the journal publishes short contributions, book reviews and conference reports. All papers are peer-reviewed by at least two referees.
Instructions to Authors
Submission of Papers
Authors are requested to submit their original manuscript and figures with three copies to: Professor T.S. Dillon, P.O Box 3106, Doncaster East, 3109, Victoria, Melbourne, Australia.
Submission of a paper implies that it has not been published previously, that it is not under consideration for publication elsewhere, and that if accepted it will not be published elsewhere in the same form, in English or in any other language, without the written consent of the publisher.
Authors are solely responsible for the factual accuracy of their papers. The receipt of manuscripts will be acknowledged.
Review Process: All contributions are read by two or more referees to ensure both accuracy and relevance, and revisions to the script may thus be required. On acceptance, contributions are subject to editorial amendment to suit house style. When a manuscript is returned for revision prior to final acceptance, the revised version must be submitted as soon as possible after the author's receipt of the referees' reports. Revised manuscripts returned after four months will be considered as new submissions subject to full re-review.
Types of Contributions
Original high-quality research papers; short communications for rapid publication; book reviews; conference reports; calendars of forthcoming events. Translated material which has not been published in English will also be considered.
Manuscript Preparation
General: Authors should write in clear and concise English. Spelling should follow the Oxford English Dictionary. Authors whose native tongue is not English are assured that editorial attention to their contributions will improve clarity and acceptability to readers. Manuscripts must be typewritten, double-spaced with wide margins on one side of white paper. Please number every sheet of paper. Good quality printouts with a font size of 12 or 10 pt are required. Authors are responsible for ensuring that all manuscripts (whether original or revised) are accurately typed before final submission. The corresponding author should be identified (include a Fax number and E-mail address). Full postal addresses must be given for all co-authors. Authors should consult a recent issue of the journal for style if possible. An electronic copy of the paper should accompany the final version. The Editors reserve the right to adjust style to certain standards of uniformity. Authors should retain a copy of their manuscript since we cannot accept responsibility for damage or loss of papers. Original manuscripts are discarded one month after publication unless the Publisher is asked to return original material after use.
Paper length: Research papers should preferably be no more than 20 pages, short communications no more than 10 pages (including tables and illustrations).
Abstracts: Abstracts should be self-contained, approximately 100 words, outlining in a single paragraph the aims, scope and conclusions of the paper. Three keywords should be provided for indexing purposes.
Text: Follow this order when typing manuscripts: Title, Authors, Affiliations, Abstract, Keywords, Main text, Acknowledgements, Appendix, References, Vitae, Figure Captions and then Tables. Do not import the Figures or Tables into your text. Subdivide your paper in the simplest way possible, consistent with clarity. The text should usually follow the standard sequence of introduction, methods results and discussion. Headings and subheadings for different sections of the paper should be clearly indicated. Do not number the sections. The corresponding author should be identified with an asterisk and footnote. All other footnotes (except for table footnotes) should be identified with superscript Arabic numbers. Note that trade names should have an initial capital letter.
Units and abbreviations: All measurements and data should be given in SI units, or if SI units do not exist, in an internationally accepted unit. If you use any symbol or unit that may not be generally recognized, please include an explanatory footnote the first time it is used, to help the referees, editors and readers. Abbreviations and acronyms should only be used for unwieldy terms and names which occur frequently in the manuscript. Abbreviations should be used consistently throughout the text, and must be clearly defined in full on first use.
Symbols: It is helpful to identify Greek symbols by name in the margin the first time they appear. Special symbols should be identified in the margin, and the meaning of all symbols should be explained in the text where they first occur. If you use several symbols, a list of definitions (not necessarily for publication) will help the editor.
Mathematical and technical setting: Detailed mathematical discussion should be placed in an appendix. Equations and formulae should be typewritten wherever possible. Equations should be numbered consecutively with Arabic numerals in parentheses on the right-hand side of the page. Type or mark mathematical equations exactly as they should appear in print. Journal style for letter symbols is as follows: variables, italic type (indicated by underlining); constants, roman type; matrices and vectors, bold type (indicated by wavy underlining).
References: All publications cited in the text should be presented in a list of references following the text of the manuscript. In the text refer to references by a number in square brackets on the line (e.g. Since Ajjarapu and Lee[1]), and the full reference should be given in a numerical list at the end of the paper. Take care that references are mentioned in the text in the correct number order.
References should be given in the following form:
[1] Ajjarapu V, Lee B. Bifurcation theory and its application to nonlinear dynamical phenomena in an electrical power system. IEEE Trans Power Systems 1992;7(2):424-431.
[2] Kundur P. Power system stability and control. New York: McGraw Hill, 1994.
[3] Newbery DM, Green R. Regulation, public ownership and privatization of the English electricity industry. In: Gilbert R, Kahn E, editors. International comparisons of electricity regulation. New York: Cambridge University Press, 1996.
[4] Lai LI, Ma JT, Wong KP. Evolutionary Programming for Economic Despatch of units with non-smooth input-output characteristic functions. Proceedings of the 12th Power System Computation Conference, PSCC, August 1996. p. 492-498.
Illustrations: All illustrations should be provided in camera-ready form, suitable for reproduction (which may include reduction) without retouching. After reduction, lettering should be approximately the same size as the type used for the text in the journal. Photographs, charts and diagrams (including chemical structures) are all to be referred to as "Figure(s)" and should be numbered consecutively, using Arabic numerals, in the order to which they are referred. Please ensure that all illustrations within a paper are consistent in style and quality. They should accompany the manuscript, but should not be included within the text. All illustrations should be clearly marked on the back with the figure number and the author's name. All figures are to have a caption. Captions should be supplied on a separate sheet. Authors should note that illustrations will not be returned unless specifically requested.
Graphs and line drawings: Good quality printouts on white paper produced in black ink are required. The minimum amount of descriptive text should be used on graphs and line drawings; label curves, etc. with single-letter symbols (i.e. a, b, c, etc.) and place descriptive matter in the figure caption. Scale grids should not be used in graphs unless required for actual measurements. Please use a selection of the following symbols on graphs: +, , (open square), (open circle), (closed square), (closed circle), (closed triangle), (closed upside down triangle). Graph axes should be labelled with the variable written out in full, along the length of the axis, with the unit in parentheses (for example, Length of sample (mm)). Lower case letters should be used throughout, with an initial capital letter for the first word only. All lettering, graph lines and points on graphs should be sufficiently large and bold to permit reproduction when the diagram has been reduced to a size suitable for inclusion in the journal. Dye-line prints or photocopies are not suitable for reproduction. Do not use any type of shading on computer-generated illustrations.
Photographs: Four sets of original photographs must be supplied as they are to be reproduced (e.g. black and white or colour). If necessary, a scale should be marked on the photograph. Please note that photocopies of photographs are not acceptable.
Colour: Colour reproduction is available if the author is willing to bear the additional incremental reproduction and printing costs.
Tables: A table is usually more effective than a graph or a paragraph of text for recording data. Tables should be numbered consecutively, using Arabic numerals, and given a suitable caption and each table typed on a separate sheet. All table columns should have an explanatory heading and, where appropriate, units of measurement. Footnotes to tables should be typed below the table and should be referred to by superscript lowercase letters. No vertical rules should be used. Tables should not duplicate results presented elsewhere in the manuscript, (e.g. in graphs).
Electronic submission
Authors should submit an electronic copy of their paper with the final version of the manuscript. The electronic copy should match the hardcopy exactly. Always keep a backup copy of the electronic file for reference and safety. Full details of electronic submission and formats can be obtained from http://authors.elsevier.com
Proofs
Proofs will be sent to the author (first named author if no corresponding author is identified of multi-authored papers) and should be returned within 48 hours of receipt. Corrections should be restricted to typesetting errors; any others may be charged to the author. Any queries should be answered in full. Please note that authors are urged to check their proofs carefully before return, since the inclusion of late corrections cannot be guaranteed. Proofs are to be returned to the Log-in Department, Elsevier Science, The Boulevard, Langford Lane, Kidlington, Oxford OX5 1GB, UK.
Offprints
Twenty five offprints and one copy of the journal will be supplied free of charge. Additional offprints and copies of the issue can be ordered at a specially reduced rate using the order form sent to the corresponding author after the manuscript has been accepted. Orders for reprints (produced after publication of an article) will incur a 50% surcharge.
Copyright
All authors must sign the "Transfer of Copyright" agreement before the article can be published. This transfer agreement enables Elsevier Science Ltd to protect the copyrighted material for the authors, without the author relinquishing his/her proprietary rights. The copyright transfer covers the exclusive rights to reproduce and distribute the article, including reprints, photographic reproductions, microfilm or any other reproductions of a similar nature, and translations. It also includes the right to adapt the article for use in conjunction with computer systems and programs, including reproduction or publication in machine-readable form and incorporation in retrieval systems. Authors are responsible for obtaining from the copyright holder permission to reproduce any material for which copyright already exists.
Author Enquiries
Authors can keep track of the progress of their accepted article, and set up email alerts informing them of changes to the status of their article, by using the "Track a Paper" feature of Elsevier's Author Gateway http://authors.elsevier.com.
For enquiries relating to the preparation of electronic artwork also consult: http://authors.elsevier.com
Contact details for questions arising after acceptance of an article, especially those relating to proofs, are provided when an article is accepted for publication.
Editorial Board
Editorial Board
Co-Editors:
T.S. Dillon
|
Digital Ecosystems and Business Intelligence Institute, Curtin University of Technology, Enterprise Unit 4, De Laeter Way, Technology Park Bentley, 6102, Australia, Fax: +61-03-9894-5633, Tel: +61 2 9514 1801, Email: tharam.dillon@cbs.curtin.edu.au |
M.A. Laughton
|
Dept. of Electronic Engineering, Queen Mary, University of London, Mile End Road, London, E1 4NS, UK, Tel: 020 326 0081, Email: michael.laughton@btinternet.com |
Y. Sekine
|
CRIEPI, 1-6-1 Marunochi, 100-0005 Chiyoda-Ku, Japan, Fax: 00813 32872840, Tel: 00813 3201 6601 |
Submissions to:
A. Hammadi
|
Digital Ecosystems and Business Intelligence Institute, Curtin University of Technology, Enterprise Unit 4, De Laeter Way, Technology Park Bentley, 6102, Australia, Email: tharam2@curtin.ath.cx |
Advisory Editorial Board:
G. Andersson
|
Power Systems Laboratory, Zürich, Switzerland |
N.J. Balu
R. Billinton
|
University of Saskatchewan, Saskatoon, SK, Canada |
P. Bornard
|
Electricité de France (EDF), Clamart, France |
A. Bose
|
Washington State University, Pullman, WA, USA |
M. Calovic
|
University of Belgrade, Belgrade, Serbia |
J. Carpentier
|
Electricité de France (EDF), Clamart, France |
M.T. Correia de Barros
|
Instituto da Energia, Lisbon, Portugal |
B.J. Cory
|
Imperial College, London, UK |
M. Da Silva
|
Universidade Federal do Maranhao, Maranhao, Brazil |
H.W. Dommel
|
University of British Columbia, Vancouver, BC, Canada |
G. Douard
|
Electricité de France (EDF), Clamart, France |
M.E. El-Hawary
|
Dalhousie University, Halifax, NS, Canada |
A. Germond
|
École Polytechnique Fédérale de Lausanne (EPFL), Lausanne, Switzerland |
H. Glavitsch
|
Power Systems Laboratory, Zürich, Switzerland |
E. Handschin
|
Technische Universität Dortmund, Dortmund, Germany |
M. Ilic
|
Carnegie Mellon University, Pittsburgh, PA, USA |
M.R. Irving
|
Brunel University, Uxbridge, UK |
A. Klos
|
Instytut Electroenergetyki Politchnika, Warsaw, Poland |
H.J. Koglin
|
Universität des Saarlandes, Saarbrücken, Germany |
D.P. Kothari
|
Indian Institute of Technology, New Delhi, India |
L.L. Lai
|
City University of London, London, UK |
O.P. Malik
|
University of Calgary, Calgary, AB, Canada |
P. Marannino
|
Università Degli Studi di Pavia, Pavia, Italy |
M.V.F. Pereira
|
Power Systems Research Inc, Rio de Janerio, Brazil |
T. Sakaguchi
|
Information Technology America Inc, Cambridge, USA |
V.A. Stroev
|
Moscow Power Engineering Institute, Moscow, Russian Federation |
K. Takahashi
|
Central Research Institute of Electric Power Industry, Chiyoda-Ku, Japan |
L. Wehenkel
|
Université de Liège, Liège, Belgium |
|
